I did these front links and also made rear links that ran from the knuckle to the upper rear arm mount on the diff, made such a big difference and with some homemade tie-rods gives adjustable alignment in every direction
If you use 0.3mm shims with 5mm ID on the upper plastic arms where it fits to the gearbox cover and 0.1mm shims on the lower arms it removes the slop from that point. The shims only need to fitted to one side and mirrored for the rear. Ive raced at a meeting twice now and it has made such a difference. They will also fit on a TT-01. Core-RC make a set.
Great job. Looks great as well. Some part numbers would be helpful for the newbies like myself 😃 I ordered the 5x8x0.1 and 5x8x0.3mm shims as a first step, lets improve 😃
This is a much needed mod on ta01 and ta02 chassis. Interestingly this is kinda what you call a compression strutt. I have them on my actual mk2 escort and they replace the anti roll bar.
Actually in this orientation, as with your Escort they are tension struts. Compression struts would run from the suspension arm rearward to the chassis. They work wonders on Escorts, as you are no doubt aware. You can also lower the front attachment point slightly and gain an element of anti dive.
Thanks for this trick. I did it today putting ball joints and a washer on top. Mines coupled with a steering kit though. Slop be gone! My turnbuckles end up being 57mm
Wow! It really works well with mine too!! Very sturdy movement. I love mine TT02 so much better than other high-end machines now. Thank you thank you!!
These front links only hold the front arms firmly at certain angle. If the front arms lowered a bit, the clearance becomes larger and the links dont fix tightly anymore
I’m building the 1/10 Subaru Impreza 99 Monty Carlo as we speak and I’m to the part where the shocks are assembled . I absolutely could not believe what I was putting together ...I’ve never seen in all my 42 years “ new bright “ shocks on a Tamiya rc or any hobby grade for that matter . Am I crazy or are these things junk ? Won’t even lock together right witch leaves slop witch hinders drivinig witch risks a good curb or parked car collision ... sorry fail bullshit Tamiya wtf . ( I rebuilt em with traxxas parts ) are all TT-02 chassis come like this one ?
It was some Chinese after market part that came with blue aluminum knuckles, but ball bearings weren't fit so I just ended up using O ring spacer which is same as that you use for TT02 kit
@@simpleisthebest73 also where did you get you tie rod that attaches to the bumper? I like your set up. I have the rcaidong steering upgrade but still some play from the friction balls in the arms
Thank you for your help! One more question..as you were showing your steering adjustments above and underneath what size bolt nuts and screws did you you use to make it more solid?
@@Syx696 it's a tap screw from hardware store just found in my tool box, and nut is from DF02 hop up parts aluminum oil damper set. Just extra parts from it. You can find anything that fits. Whatever it works. Good luck friend! 😉
These are all just leftover parts from my other RC kits. Plastic spacer is from CVA damper parts, and I use long hollow screws or cut off screw head as turn buckle linkage, and just need some ball connectors.
@@evanmehlhose6793 don't worry about that. That blue front upright spacer came with Chinese aftermarket aluminum front upright, but ball bearings didn't fit. So, I just only use spacer. You can just use plastic parts came with the kit.
@@simpleisthebest73 Oh I see I’m just a sucker for that shiny aluminum haha is this the set to buy? Than just get some 5mm ball screws? www.ebay.com/itm/Tamiya-54556-FRP-Front-Damper-Stay-Set-TT02B/153991356664
I did these front links and also made rear links that ran from the knuckle to the upper rear arm mount on the diff, made such a big difference and with some homemade tie-rods gives adjustable alignment in every direction
If you use 0.3mm shims with 5mm ID on the upper plastic arms where it fits to the gearbox cover and 0.1mm shims on the lower arms it removes the slop from that point. The shims only need to fitted to one side and mirrored for the rear. Ive raced at a meeting twice now and it has made such a difference. They will also fit on a TT-01. Core-RC make a set.
Thanks very much for your comments!
With the 0.1mm shims for the lower arms do you no the inner diameter hole? I have all yeah racing bits and find the slop is quite bad on the rear
Great job. Looks great as well. Some part numbers would be helpful for the newbies like myself 😃 I ordered the 5x8x0.1 and 5x8x0.3mm shims as a first step, lets improve 😃
This is a much needed mod on ta01 and ta02 chassis.
Interestingly this is kinda what you call a compression strutt. I have them on my actual mk2 escort and they replace the anti roll bar.
Actually in this orientation, as with your Escort they are tension struts. Compression struts would run from the suspension arm rearward to the chassis.
They work wonders on Escorts, as you are no doubt aware. You can also lower the front attachment point slightly and gain an element of anti dive.
Move your front shocks to the upper position for better turn in 😊
Thanks for this trick.
I did it today putting ball joints and a washer on top.
Mines coupled with a steering kit though. Slop be gone!
My turnbuckles end up being 57mm
Wow! It really works well with mine too!! Very sturdy movement. I love mine TT02 so much better than other high-end machines now. Thank you thank you!!
I'm glad to hear that. Happy RC to you 😊
Do you have a link for the parts please?
日本語で失礼します、ノッキーさんの所でコメントされていたので、気になって見に来ました。
フロントトルクロッドが思っていたよりもずっと洗練されついて驚きました、ボトム時にキャスターが立ち上がる方向になりますね、自分も此方が好きですが、ノッキーさんはキャスターが増えるのが好みの様ですので、次回TTの動画が楽しみです、他のラジコン動画も気になる物ばかりですね、ベンツ190の海外仕様キットは自分も欲しかったのですが、日本仕様は昔スペアボディーで販売していたディーべルスアルトがキットで発売された物を購入しました。
タミヤのポルシェシリーズは自分も集めていますので、何処か親近感みたいな物を感じています。
コメント有り難う御座います！私自身もノッキーさんの動画をいつもご覧に頂いって降ります。この仕様はキャスターにも影響されます。
Great job, has improved my whole steering, thanks
I'm glad that it's working out for you.
My TT02 is very solid without those links, no movement at all. And for the best steering use tt02 type s part number 54965
Some interesting ideas, thanks for sharing!
Bloody brilliant idea! Thank you for sharing!
You are more than welcome! Thanks for watching.
Thank you 🙏 Its people like you that make sure people like me dont spend so much money 😅🙏also Saved me alot of frustration and time too
Thank you for subscribe to my channel and good comment. Wish you best of luck, and everything work out for you well.
I'm going to try it with my Tt02. Thank you!!
This setup also help adjust casters setting!
I'm glad that you realized that lol
Awesome advice. Thanks for showing. I will also try! 👍
Brilliant. Thank you so much for sharing….
Best top secret release for TT-series
Thanks for your comments! Have a merry Christmas!
These front links only hold the front arms firmly at certain angle.
If the front arms lowered a bit, the clearance becomes larger and the links dont fix tightly anymore
Good point!
TA-02で、かなり前に、サードパーティーから、同じような効果のある商品が、発売されていましたよね。
コメントありがとうございます！ そうかもしれませんね。。
thats actually genius , thanks mate :)
why have you put your shocks on upside down does it make any difference if your doing speed runs ?
Thanks! Great video. 🙌
Thanks very much my friend!
Nice.! 👍 👍 👍
Brilliant! Thank you for this!
Thank you!!
And thanks I’m going to try the steering DYI
Mounting the shock upside down actually hurts performance of the shock, just a FYI
Thanks for the advice. I will reverse it again if I ever get in any sort of race.. lol
Its a toy mate.
Why would it hurt the performance?
@@TheBod76 Sprung weight vs. Unsprung weight.
Great ideas.
Nice job....the original TT02 front suspension is too loose... the bottom arms are nice , but upper arms and knuckles joint.......
Yes, exactly! That's why I came out with this idea.
Mechanic After Hours brought me here...I may try this. THNX.
Love the car. Also what dampeners are you running?
Thank you! Those are Tamiya’s
@@simpleisthebest73 Thanks, Anyway you can find the part number for those?
@@victortakeda9338 these are bought more than 20 years ago… sorry..
How come you installed the dampers upside down?
really like this video bro, what shocks are those you have on this TT02? they look good !
Thanks my friend! These are Tamiya shocks that I bought 25 years ago in Japan.
great video thank you!!
Thank you friend!
Bro you’re a legend!
lol Thank you!
Yeah totally right and it is a great mod for any rc on road or off ....
I’m building the 1/10 Subaru Impreza 99 Monty Carlo as we speak and I’m to the part where the shocks are assembled . I absolutely could not believe what I was putting together ...I’ve never seen in all my 42 years “ new bright “ shocks on a Tamiya rc or any hobby grade for that matter . Am I crazy or are these things junk ? Won’t even lock together right witch leaves slop witch hinders drivinig witch risks a good curb or parked car collision ... sorry fail bullshit Tamiya wtf . ( I rebuilt em with traxxas parts ) are all TT-02 chassis come like this one ?
Well done thanks
Why are the shocks upside down? Is it better with handling at all?
Lowerling cg but it has a oil leak problem.
Those stabilizers. Aren’t necessary at all. You should adjust the steering link heights. The slop the stabilizer stops first change performance.
Thanks! I will keep that in my mind 😌
What is the part you've used to connect the turn buckle the top of the knuckle? The blue part.
It was some Chinese after market part that came with blue aluminum knuckles, but ball bearings weren't fit so I just ended up using O ring spacer which is same as that you use for TT02 kit
@@simpleisthebest73 trying to figure out what I can use to connect it to the knuckle without the having the part you have.
Thanks 👍
Good to know
What kind of tires are those?
Will need to do this too mine 👍🏻
このタイヤとホイールはどこのものですか？
イベイーで買った物ですが、中国産だと思います。ご視聴有り難うございます🤗
What's with the upside down dampers. I've seen these a few times
I just copied some other drivers too. I think it help reduce oil leaks, and it look different! It’s cool to be look different lol
What are these called?
What did you use or what can I use for the friction balls In the suspension arms?
It's just the normal one that come with the kit. I'm not sure if I answered your questions right.... sorry if that wasn't help..
@@simpleisthebest73 also where did you get you tie rod that attaches to the bumper? I like your set up. I have the rcaidong steering upgrade but still some play from the friction balls in the arms
@@brentg2642 those are just leftovers from other Tamiya RC kits or Tamiya Hop-up parts.
Where did you get the blue pieces on the steering parts.
It’s from aftermarket TT02 Steering knuckle arm set, but ball bearing didn’t fit so I just use the spacers
こんにちは！
出来ればやり方を教えて欲しいです。
こんにちは。特にやり方と言っても。。ただ余ったタンバクル部品やCVAダンパに残ったスペーサーを組んだものなので。。すみません役に立ったなくって。。
@@simpleisthebest73 ありがとうございます😄チャンネル登録しました。
@@イチゴジャム-c3c ありがとうございます😊
Hi. What size wheel tire are you using?
I’m sorry.. I don’t have the spec of the tires.. I believe they’re med narrow Chinese aftermarket parts
What is the size and length of the ball connector you used?
5mm ball connector/ 25mm, 15mm turn buckle end..
Thank you for your help! One more question..as you were showing your steering adjustments above and underneath what size bolt nuts and screws did you you use to make it more solid?
@@Syx696 it's a tap screw from hardware store just found in my tool box, and nut is from DF02 hop up parts aluminum oil damper set. Just extra parts from it. You can find anything that fits. Whatever it works. Good luck friend! 😉
Thanks again my friend!!
This might not be applicable to my TT02 Type S...
Unless i am wrong.
Why are you running with the shocks up side down
I thought it would help to store it for long time.. not really sure it will work..
@@simpleisthebest73 thanks
have new sub :-))
😳💪👍
What song is that
It's from Inshot app. Music: Shave musicians: Marco Lazovic
Do you have a link for the parts you used?
These are all just leftover parts from my other RC kits. Plastic spacer is from CVA damper parts, and I use long hollow screws or cut off screw head as turn buckle linkage, and just need some ball connectors.
Whats the blue aluminum called that you have connected?
@@evanmehlhose6793 don't worry about that. That blue front upright spacer came with Chinese aftermarket aluminum front upright, but ball bearings didn't fit. So, I just only use spacer. You can just use plastic parts came with the kit.
@@simpleisthebest73 Oh I see I’m just a sucker for that shiny aluminum haha is this the set to buy? Than just get some 5mm ball screws? www.ebay.com/itm/Tamiya-54556-FRP-Front-Damper-Stay-Set-TT02B/153991356664
Thank you for your quick feedback what exactly did you do for mounting up the front?
ダンパーが上下逆
Learned nothing
There is nothing to be learn lol