Yes to quartz lock.😊 I have a GX-95 MK1. I've only seen some tape deck forums someone did it. Thanks for your detailed maintenance video. Very useful for me in my next servicing.
Thanks for the recommendation. There are some videos already about that alignment process, but if it would be interesting, then i can release that video also. :) Cheers
Thanks for the video. I have to renovate two GX-52's soon, so some inspiration is a good thing! GX-52 is direct drive single capstan, and dual gab single head, otherwise I think that the tape transports are somewhat similar.
Hello, oil i am using high quality one that uses for mechanical watches repair (heavy duty and long lasting one), grease i use mixed - teflon grease or lithium grease. Cheers!
@@richardmayr6 these gauges are available in ebay and i think i have seen in ali also. Just search something like "Cassette Head Alignment Gauge" Thanks mate! Cheers
Hey there! Do you know if the Tape unit from MK2 fits on MK1? My MK1 is defect and have the opportunity to get an MK2 Tape unit. Thanks you in adavance for your help :)
Hi! Tapetransport is actually the same, just head block is different from what i have seen and also modes motor is quieter on mk2. Personally i have never tried to swap them around but i think they are compatible. Also what is wrong with mk1 mecha? Cheers
@@LT.tapeheads.service Thank you for your fast answer! I have missing parts on my MK1 for the Tape Transport. Just have the front lid of the Transport. The holding case is missing. And I have the chance to buy a complete serviced tape drive unit from an MK2 with a small platine for 125€. Think about to buy this und hope that it works with my MK1. What would you do? Have a great weekend and thank you :)
@@raulcordoba6965 hi, playback head connectors will be different due to mk2 is balanced one and mk1 not, but i think its not an issue just soldering will be required. Otherwise serviced transport from mk2 for 125 is good deal if it is really serviced :) Cheers
Hi, i am buying idlers from fixyouraudio or revoxde ebay. Now i have tried one supplier from poland, hes also selling in ebay - those are ok too. Pinch rollers i buy from fixyouraudio or ali sometimes. When you installed new idler have you cleaned good tape spindles surface where goes idler in contact? - thats the most common thing most forget. If you bought idler that are transparent then just put it straight to recycle bin. Cheers
Thank you for the clear explanations. I’d like to see the quart lock modification.
Coming soon! Cheers
Quartz lock procedure would be very interesting to see.
i m agree
Красава, очень детально и красиво все сделал без лишней информации. Буду свой обслуживать так как гаедает механизм поднятиня головок при нажатии стоп.
Thanks for posting this long video i will study it in detail as i just picked up a GX75 and a GX95
Thank you! Hope it will be helpful for you :) Cheers!
Yes to quartz lock.😊
I have a GX-95 MK1.
I've only seen some tape deck forums someone did it.
Thanks for your detailed maintenance video.
Very useful for me in my next servicing.
Thank you for very nice comment! I really appreciate it! Cheers! 🙂
Quartz locked would be amazing to see. 💯👍
You should do a step by step video on how to adjust the internal pots for the bias and level knobs
Thanks for the recommendation. There are some videos already about that alignment process, but if it would be interesting, then i can release that video also. :)
Cheers
Thanks for the video. I have to renovate two GX-52's soon, so some inspiration is a good thing! GX-52 is direct drive single capstan, and dual gab single head, otherwise I think that the tape transports are somewhat similar.
Thanks for nice comment! ☺️Cheers
these devise no need to be quartz lock - it;s already too good even better than many real to real machines 🙂 You are doing excellent Job * Bravoo
Thank you. I really appreciate it. Cheers
1+ for the quartz modification ;)
Hello, can you please tell me which oil and grease you used to renovate the Akai drive, thank you very much.
Hello, oil i am using high quality one that uses for mechanical watches repair (heavy duty and long lasting one), grease i use mixed - teflon grease or lithium grease.
Cheers!
Thank you, just one more question, how can I get a setting gauge like the one in your video?
I really like your calmness and professionalism.
@@richardmayr6 these gauges are available in ebay and i think i have seen in ali also. Just search something like "Cassette Head Alignment Gauge"
Thanks mate!
Cheers
👍
Hey there! Do you know if the Tape unit from MK2 fits on MK1?
My MK1 is defect and have the opportunity to get an MK2 Tape unit.
Thanks you in adavance for your help :)
Hi!
Tapetransport is actually the same, just head block is different from what i have seen and also modes motor is quieter on mk2. Personally i have never tried to swap them around but i think they are compatible. Also what is wrong with mk1 mecha?
Cheers
@@LT.tapeheads.service Thank you for your fast answer!
I have missing parts on my MK1 for the Tape Transport. Just have the front lid of the Transport. The holding case is missing.
And I have the chance to buy a complete serviced tape drive unit from an MK2 with a small platine for 125€.
Think about to buy this und hope that it works with my MK1.
What would you do?
Have a great weekend and thank you :)
@@raulcordoba6965 hi, playback head connectors will be different due to mk2 is balanced one and mk1 not, but i think its not an issue just soldering will be required. Otherwise serviced transport from mk2 for 125 is good deal if it is really serviced :) Cheers
Hello, could you please tell me where you bought the idler and pich rollers?I bought from ebay a kit,and idler is slipping more than old one.Thank you
Hi, i am buying idlers from fixyouraudio or revoxde ebay. Now i have tried one supplier from poland, hes also selling in ebay - those are ok too.
Pinch rollers i buy from fixyouraudio or ali sometimes.
When you installed new idler have you cleaned good tape spindles surface where goes idler in contact? - thats the most common thing most forget.
If you bought idler that are transparent then just put it straight to recycle bin.
Cheers
Just sent you an email about my Akai GX-95 as I would like to utilize your repair services.
Thanks! I will reply as soon as possible.
Cheers!