As someone who used to manage the back office of a busy Auto Collision Shop, I agree with you 100%. We would order all the parts up front and keep them in numbered bins in the parts room. The techs had copies of the estimate and the bin number was written on it so they knew where all the parts were located. Love watching your channel. You and your bro’s have bad skills. 👍
Yuri, try to stay calm mate. You did a great job and a few more steps and that truck is finished. Yes, it is a drag when you have to wait for parts or ordered parts are wrong, but you need to step away from it until the rest of the stuff comes in. PLUS. We get another great video on this vehicle! Keep up the good work, we love your content!
You and your brothers are nuts. Hope you all still get along. Never forget your brothers. You will need each other one day. It sucks but it’s life. Shout out to your dad instilling strong work ethic.
Oh no Yuri, I had chills watching you use that angle grinder wearing sandals. Don’t listen to those saying it’s cool, it’s not 😞 safety should be high on the priority list at alll times. You can’t post from a hospital bed 😞
Feel your frustration at the end of the video, I just took over and organized everything myself that way I can proceed without interruptions on a job other then unforeseen problems! Good to see how you pulled the frame Again I always learn something new !
this was very impressive to watch. Only someone with years of experience and trial and error would know how to pull that out first time around without damaging the frame rail more. Great job Yuri. (Checkout Black Fluid Film its a Lanolin based wax and is very similar to the undercoating you are talking about. it will wipe off like you said)
What started as a very nice frame work ended with frustration....sorry to see you could not finish this nice job and i do understand your anger.....and of top of that Cat almost poop in the Shop........Sometimes you see better days.Like this video Yuri !
Dear Yuriv, You started so well with a very nice frame work in thuis 2018 Chevrolet Silverado but ended with frustration....sorry to see you could not finish this nice job due to parts you’re waiting for so I understand your frustration but there’s always light at the end of a tunnel. I look forward to your next vlog and send you love from The Netherlands
I would stay away from heating the the high strength steel frame. It is not recommended. A chain hooked behind the clamp and back to the frame will slow down flying objects from hitting you in the head. The first vid, you could have pulled on the control arm attached yet, to start off.
As far as I have seen an insurance company would not allow this repair. I have known 2 people who's complete frame had to be changed due to minor accidents. The factory does not allow welding on a high strength steel frame.
LOVE the steel toe safety boots used to hold down that metal right next to the big grinder/cutting wheel....LOL...keep being you!!!!
I think they are made in India/ Pakistan.
Bro those are the new Bluetooth safety boots
Those are Kevlar socks! Lol
My thoughts as well
No matter what people say those safety flip flops are the boss. Have a good week end
As someone who used to manage the back office of a busy Auto Collision Shop, I agree with you 100%. We would order all the parts up front and keep them in numbered bins in the parts room. The techs had copies of the estimate and the bin number was written on it so they knew where all the parts were located. Love watching your channel. You and your bro’s have bad skills. 👍
Where is Motortrend? A frame specialist, a bodywork specialist and a paint specialist? C’mon man. I would watch this all day.
It is nice to see a young man who actually works. Instead of hanging around watching tic toc videos and let the older guys do all the work.
You saved your customer big time. On a M-B, the front subframe is $10K installed.
Nice safety shoes
Yuri, try to stay calm mate. You did a great job and a few more steps and that truck is finished. Yes, it is a drag when you have to wait for parts or ordered parts are wrong, but you need to step away from it until the rest of the stuff comes in. PLUS. We get another great video on this vehicle! Keep up the good work, we love your content!
You and your brothers are nuts. Hope you all still get along. Never forget your brothers. You will need each other one day. It sucks but it’s life. Shout out to your dad instilling strong work ethic.
Life’s full of challenges. Great work. I can’t help wondering if all repairers would be as professional, take as much care and pride as you do
Oh no Yuri, I had chills watching you use that angle grinder wearing sandals. Don’t listen to those saying it’s cool, it’s not 😞 safety should be high on the priority list at alll times. You can’t post from a hospital bed 😞
Hello my friend you doing always good job 👍 ( Kuwait 🇰🇼)
I can feel the frustration from here, hope the next project goes smoothly
I like that editing job at :59 seconds. The metal looks like it levitated
Steel-Toe Flip Flops!!!👍👍👍 Cool!!! got to get me a pair!!! 😉😉
Feel your frustration at the end of the video, I just took over and organized everything myself that way I can proceed without interruptions on a job other then unforeseen problems!
Good to see how you pulled the frame
Again I always learn something new !
this was very impressive to watch. Only someone with years of experience and trial and error would know how to pull that out first time around without damaging the frame rail more. Great job Yuri. (Checkout Black Fluid Film its a Lanolin based wax and is very similar to the undercoating you are talking about. it will wipe off like you said)
Thank you bro and I appreciate the tip about the wax, I will check it out for sure.
It's good brother you can always use the parts that don't fit on another build can't wait for the next video 😊
Nice job on the frame rail--should take an alignment no problem !! And I love your "Pakistani" steel toed shoes !!
His old man definitely orders the parts HAHA my dad used to be the some way I started ordering parts myself. lol
Glad to see Cat again. Super badass videos being made right here!
Master Yuri, always incredible work mate! Keep Orange Crushing It!
You are very good at what you do! awesome
You do excellent work Yuri
2:17 Yuri metal changes its properties even when it's not red hot. Learnt it from a welding engineer. So be careful. Cheers
Good to see your got your Australian safety flip flop s on cheers
What started as a very nice frame work ended with frustration....sorry to see you could not finish this nice job and i do understand your anger.....and of top of that Cat almost poop in the Shop........Sometimes you see better days.Like this video Yuri !
Dear Yuriv,
You started so well with a very nice frame work in thuis 2018 Chevrolet Silverado but ended with
frustration....sorry to see you could not finish this nice job due to parts you’re waiting for so I
understand your frustration but there’s always light at the end of a tunnel.
I look forward to your next vlog and send you love from The Netherlands
Cat knew the parts were wrong he just didn't know how to communicate it without shitting under your rack. lol
Yuri - keeping it real! Keep these vids coming!
Nothing like a good safety toe shoe lol.
I swear I seen 🐊‘s come out with a steel toe! Big dog get onto them aha. Love the work and creativity 🫡
Safety sandals 🎉❤
Love your work and your channel bro you are awesome Yuri! Keep it up mate
Automatic like button - engaged
Paul is fired ! And Cat is on probation for violation to his workspace. Lol
Paul and your dad said to
Settle down your starting to get a bit lippy 😂🤣😂💯
Good work mate
I love your safety chanclas
Nice safety equipment
I know the feeling of getting into a frame job and having to wait on a body part
It’s almost as bad as welding something on wrong 😅
Another Great Video 👍 Great content, keep up the great work!
Great jod on the frame work if you couldn't do it nobody can and like your work shoes'
Thanks
Woolwax or fluid film closely matches oem frame coating
Cat says…..give me a litter box man. I need to take a dump. 😂
Love watching you n your brothers. So much better then the goonzquad channel as they don't do much rebuilding on cars only top expensive cars
tnx for the video
As a former body shop owner, we all know that all parts can’t be in all the time when you complete a job😊
Love accidental interruptors! Funny grandpa
great stuff thanks
Oh Yuri, bless ya, that stress thing is a pig
Great Job 👍
Hey Juro, please take care about your safety and also take care about cat's health ❤
have you ever tried spray on bed liner for undercoating
LOL "good enough for the girls I dance with".
Yuri - Please post a link to site where we can purchase a pair of those OSHA approved flip-flops
Check out nikobrothers.com that’s where I got them!
Thanks Yuri - checked them out - only have women’s slides - my shoe size must be larger than yours!
Safety first, always wear socks with your slides, 😂
Nice work boots.🤣😂😂
Man you got to get cat fixed, he's going out cating around getting in fights
F’N brilliant!
Gday guys
I would stay away from heating the the high strength steel frame. It is not recommended. A chain hooked behind the clamp and back to the frame will slow down flying objects from hitting you in the head. The first vid, you could have pulled on the control arm attached yet, to start off.
I think they have steel toe crocs now
try telling that last bit to pops and in that tone😅
Nice ,😎😎😎👍👍👍
❤
Sorry pal, i have to override your system.System malfuntion.What a damn system.
Haha
Cat was rumblin'..............
Thank God you Wore your STEEL TOE SOCKS
HA HA
I try hard not to be a Karen but that grinder blade so close to his toes kinda freaked me out!
Imagine if the disk explodes :o
I just bought a 2018 silverado crew cab 4x4 LT Z71 package for 15k last Thrusday. Clean title not wrecked.
As far as I have seen an insurance company would not allow this repair. I have known 2 people who's complete frame had to be changed due to minor accidents. The factory does not allow welding on a high strength steel frame.
How much does somthing like this cost??
Someone needs to be in charge. Unfortunately you need to subscribe to a repair software. That way you order the parts you need.
0:36 bruh
shout my friend great content like always🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉going for 100,000 suscribers🎉🎉🎉🎉🎉🎉
Hi Yuri another great vid but you need to get Cat's balls removed, it'll stop him disappearing and fighting and peeing in the garage!
As bad as I didn’t want to, I think you are right about that, poor guy is in for a big change 😅
what was that parts company. lol
Atleast wear some tennis shoes. You never know, someday you might want to be a foot model. Stay safe so we can watch these videos.
Юра стоматолог😂
🚙👏👍💪🤩😍
Comment
Привіт з України!!!
Frame is junk all the welding and heating changes the metal now the frame is weak in the repaired area that’s how people get killed by bad repairs
Man you need a helmet or something that thing breaks off it will smash in the face
Meh, for every like I get, I’ll do a push up.
Gay