I have the preloaded rockford p2 2x12 box and it plays 26Hz just fine and has flex at 600 watts but can play to 800 watts. This guys system must be loud, but just isn't good for video because no lows, no flex. I would love to know what the prefab 2x12 rockford box is tuned to
Something must be wired wrong if the 2500 isn't enough. It makes over 3000 rms and those p3s are 600, 700 tops rms. Maybe not enough power to run the amp?
@@draketrahan9638 ok. Makes sense. Nice set up either way. A t1500 would of been plenty and would of been cheaper to power it. My t500.2 does almost 1200+ according to Steve maede
honestly kinda curious what a big 6th order would sound like with 6 or 8 p3 12s or 15s or maybe kicker q class haven't seen anyone do that defiantly wouldn't need a hole lot of power to do it
Big 4 yellow top optima battery under the hood all 0 gauge ofc wires with xs power d925 battery in the trunk for a single fosgate t1 12 subwoofer wired to 2 ohms on a kicker cxa1200.1 amp slapping 😅
That's crazy asf I had a mtx thunder 1200.1 at 1ohm it was cool but I bought my prime 1200 for my 2 p3s n it so uh nd way better than ever.... All rocket fans please keep everything the same all the way to the install kit 100% max quality I swear.....nd I got 2012 ford fusion sounding stupid
So he thinks running 2 batteries + an alternator is enough power for a 10k anp🤦🏾♂️🤦🏾♂️🤦🏾♂️. And wondering why it goes into protect mode. His voltage drop is crazy. He need more batteries then he wont have that problem. And the need to throw that yellow top in the trash and just run all agm batteries
I'm just saying I've owned those amps before and they are power hungry. The voltage wont stay stable without minimal 4 batteries. Read the manual if you have it. And it will tell you recommended battery bank for the amp
No sir....any system with bandwidth is idea...but 35hz and up what i look for..up to 80hz...TBIRD5.0 plays that...Blowthruf150 plays 27hz to 65hz strong
ig so but ima get them soon n running them on a p1000x1bd each at 1 ohm hopefully they dont fuck up on me 😂i heard they can handle up to 1200w rms each but they pop quick so hopefully i can get it at a good 900 or 1000 flat n keep them for at least a year
hells ya gettin it for what it is . BASSHEADS FOR LIFE !!!
Traded a Rockford t2500 for a Stetsom? Na hell na 🤦♂️ I don’t care if it does put out more power! But you have to love the P3s!
🤔so he just got a t2500 laying on the floor WOW!
John Doe Ikr
Nicely done well built build up very impressive build hits hard pound's great
Take that "10k" the fuck out and put that Rockford back in.
💪Thats looks solid thanks bro
I'm shocked that he said the T2500 wasn't enough I'm sure it is I wonder how much he selling it for.
hell yeah! Fosgate!
😎😊🙌👍👍👍💪
Nice build.
I have the preloaded rockford p2 2x12 box and it plays 26Hz just fine and has flex at 600 watts but can play to 800 watts. This guys system must be loud, but just isn't good for video because no lows, no flex.
I would love to know what the prefab 2x12 rockford box is tuned to
I had 2 of the fosgate p3 12s model b4 these in a ported enclosure in a 81 rx7. They do get down
NICE VID BRO!!!
Bro i got 2 p3's in my 2014 Ford taurus. I really like em. My fosgate prime 1200 watt powers them.
Something must be wired wrong if the 2500 isn't enough. It makes over 3000 rms and those p3s are 600, 700 tops rms. Maybe not enough power to run the amp?
I didn't have enough power to the amp
@@draketrahan9638 ok. Makes sense. Nice set up either way. A t1500 would of been plenty and would of been cheaper to power it. My t500.2 does almost 1200+ according to Steve maede
He may have the ohm load too low.
@@chekoz77 I'm wired at 1 ohm rising to 2. Something
Right! With a clip light 🤔
Love the Houston Texans logo
Rep dem Texans then... That truck beatin...
honestly kinda curious what a big 6th order would sound like with 6 or 8 p3 12s or 15s or maybe kicker q class haven't seen anyone do that defiantly wouldn't need a hole lot of power to do it
That an awesome video man. He was getting it tho. Thanks for sharing
Big 4 yellow top optima battery under the hood all 0 gauge ofc wires with xs power d925 battery in the trunk for a single fosgate t1 12 subwoofer wired to 2 ohms on a kicker cxa1200.1 amp slapping 😅
That's crazy asf I had a mtx thunder 1200.1 at 1ohm it was cool but I bought my prime 1200 for my 2 p3s n it so uh nd way better than ever.... All rocket fans please keep everything the same all the way to the install kit 100% max quality I swear.....nd I got 2012 ford fusion sounding stupid
Dropping lows
Nice setup
Need that amp
So he thinks running 2 batteries + an alternator is enough power for a 10k anp🤦🏾♂️🤦🏾♂️🤦🏾♂️. And wondering why it goes into protect mode. His voltage drop is crazy. He need more batteries then he wont have that problem. And the need to throw that yellow top in the trash and just run all agm batteries
I put the new alt on and put dual inputs to the amp. Sit in 13s while playing so yeah I think it works
I'm just saying I've owned those amps before and they are power hungry. The voltage wont stay stable without minimal 4 batteries. Read the manual if you have it. And it will tell you recommended battery bank for the amp
I got 2 12p3s wit that 2500 amp an my shitt hit as hard as his 4 subs🤦🏽♂️🤦🏽♂️🤦🏽♂️
He needs more power
His name is drake he’s my friend lol and his setup is different now he has 6 12s
I have the same setup as him and almost the same box in a Ford ranger it’s on skars fan page on Facebook ( nothing skar about it )
How does it compare the the old 4 12s???
Yo need more power scotty!!!ASAP
What is your box tuned at my friend
What is your box tuned at
4x Audio System X12-900 would be much better :D
High bass u would like my system its tuned about 45-50
No sir....any system with bandwidth is idea...but 35hz and up what i look for..up to 80hz...TBIRD5.0 plays that...Blowthruf150 plays 27hz to 65hz strong
Bro 10k on four holy shit 🤣🤣🤣they can't do it broooo
Amp was eating volts ...looks loud
P3's are rated 600 rms each??
ig so but ima get them soon n running them on a p1000x1bd each at 1 ohm hopefully they dont fuck up on me 😂i heard they can handle up to 1200w rms each but they pop quick so hopefully i can get it at a good 900 or 1000 flat n keep them for at least a year
@@Nico-jk4sb ive got two p3 on the p10001bd amp at 1ohm. flexin
Need that amp