How to use the iCarsoft Mercedes II MB II scanner
HTML-код
- Опубликовано: 7 окт 2024
- I (Lou ) show you how to use the iCarsoft Mercedes II scanner.
I have been working on Mercedes-Benz for 20+ years.
I can help with all Mercedes-Benz diagnosis issues.
This scanner is good for the avid do it yourselfer. It is just enough to read codes and get an idea of what is happening. Then you can use the codes to contact me and I can help with the diagnosis. I can save you hundreds if not thousands over the lifetime of owning a Mercedes. I have been doing online diagnostics for 10+ years. Let me know what you need help with, I will always do my best to get you fixed up or in the right direction.
www.cartechconnect.com
www.ebay.com/i...
also check out my podcast on itunes or other podcast sites
Stealership Stories
I bought this exact scanner to diagnose a misfire on my 02 SLK32AMG. I looked at the cylinder misfires/errors in real time (data stream) and determined the exact one that was bad. It turned out to be a single spark plug wire. Saved me a trip to the dealer and a pile of money.
yes nice job, the scanner is usually only as good as the user :)
I am gonna need this in 2 days... Just purchased the scanner and I'm gonna look at a few low mileage ML55's... Huge thanks for uploading this!
Found a pristine ML55. Went for a test drive, everything seemed ok. Hooked up the scanner. Catalytic converter I/M Readiness was INC along with a few others. Could not connect to the Transfer Case Module, turned out Low Range didn't turned on. This saved my @$$ for real! Thanks again!!!
Thanks so much I reset my air conditioner so I could recharge it. I clear the code that was blocking me to know what the Freon level was. This a great device thank 💯
Glad it helped!
Did u have the blinking ac light did this same scanner tool reset the ac please let me know
Reached out to Lou about an airmatic suspension issues that I had and he was very helpful and knowledgeable with MB!! No need to go to the stealership :)
Marco Quintero thank you for allowing me to assist!
just bought the scanner and googled it s application , glad i found you ,, have subscribed .. thank you for your time and effort to share your knowledge
Thank you very much for the nice compliments, more videos on the way very very soon.
Lou
@@MasterTechLou That is great to hear.. Good to see some one that does not mind sharing knowledge.. Once I check my codes if I have an issue will message u via your website and expect to lay for your services
Just received my MBII and it's worth every penny! Cheers Lou, from another former ELITE student. Year 2000 grad, Orlando.
Wassup my brotha from anotha mutha! We probably most definitely know the same peeps. Its a good scanner for the money. Has a few setbacks but still not bad. Check out the A30M I was really impressed with that one.
@@MasterTechLou will do! Thanks for the info.
Thanks again for your help Lou.
This has to be the best video I seen how to use the mb2
Hi Lou I just bought this scanner to diagnose my 2007 gl450 fuel gauge on E
Issue hopefully I find out the issue
It will help a little. Check codes in rear sam, and you should also be able to see the live data in the rear sam for the fuel level gauge but you will ultimately have to access the level sensors (2 of them) and test them with a meter.
Hey, bro. I appreciate your video I have a problem with my 2001 Mercedes s500 hoping that you could shed some light on my problem
lol how the hell can anyone help you if you don’t provide any info whatsoever at all
Good vid. I envy your knowledge. I too own Benzes and I wish Carsoft had something Pre02.. I love my older Benzes and I do have the MT2500, but I would like to have something a lot more easier to navigate. 🤦♀️🤷🏼♀️
I am Her icarsoft sells an early adapter which makes me think it can do pre 02. I will look into that
I am Her thank you for the nice comments. Only experience breeds knowledge. :)
Benz-Tech Lou P. Please do. Let us know
@@iamher6422 hi there, this is Jessica from iCarsoft Inc.,
please kindly note that we have BENZ 38 Pin adapter for older Benzes.
But the BENZ 38 Pin adapter can not compliant with MB II,
it can compliant with our new items MB V1.0/MB V2.0/CR Pro/EU Pro/CR V2.0 (1+4).
You can search "iCarsoft BENZ 38 Pin adapter" on eBay or Amazon to get it.
www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=icarsoft+38+pin&_sacat=0
Jessica
Skype: bongch503
Email: scanner01@icarsoft.com
www.icarsoft.com/
Thanks for your help Lou!
Great Video, on this Scanner the OBDII Selection. Is that for other non Mercedez Vehicles. Nothing in the manual addresses that.
You can use that on ANY car. It will read the engine module direct for obd2 codes. And thanks for the nice comments!
I recently used it on a McClaren 600LT and it worked fine.
@@MasterTechLou thanks
You can reach me at www.cartechconnect.com
I can help diagnose all Mercedes-Benz issues.
the link is no longer working?.. I just bought this scanner & receiving it later today, I am going to scan my w219 CLS550 and I will let you know if I have any questions. Thanks for the vid!
Thanks for the video, subscribed.
Great video, going to order one! Do you know if the “real” mileage of the car is readable in any of the modules vs what is displayed on the odometer? Any tips and tricks appreciated!
David Moreno the EIS and Instrument cluster are the only modules that store and share mileage. If you replace one of those the mileage will update/correct itself after 500 miles of driving. From what I was taught.
👍👍👍this fix my car yo thanks 🙏🏿 😃😃
Glad to hear, happy new years!
Lou
Thanks for the video Lou. I have an Sl 32 AMG. Believe I might have a vacuum leak due to high fuel consumption but do not have any codes. Will this tool help me diagnose/locate? Thanks!
Hello, thanks for the nice comments.
if you have a vacuum leak the engine module is very good at setting a code for lean. not sure what module you actually have because there is no SL 32 amg., but fuel consumption is very tricky, because there are so many factors that play into it. How you drive, where you drive, temperature, fuel quality. if there is a fuel consumption issue you would most definitely get a code in a Mercedes. I cant think of an instance where I had a physical issue like a leak and no rich or lean code to go with it., and yes and no, the scanner can help you if you watch o2 sensor values and then spray the intake and engine with carb cleaner to see if the o2 sensors change rapidly, but it can also cause false readings since the mass air flow sensor can pick up the fumes. so its tricky on how to find a leak, usually smoke testing is best.
Lou
Hey Lou, came here to this video because i’m trying to diagnose 2 issues i’m having and I do have this scanner. I have a 2008 CLS 550…. When I start the car from cold, the heat works completely fine. If I drive the car then turn it off and come back to crank the car up, it will not push out heat, just cool air. I’ve changed that heater control valve with no luck. I’m not sure where my issue could be. I do know my thermostat needs to be changed…. I think it’s stuck a bit open because my engine runs a little under normal operating temperature in the winter time. Maybe somehow this is connected?
2nd issue would be the rear vents don’t push out AC in the summer all the time. It will start out cold then get hot. If I turn the temp all the way up in the rear then all the way back down, it will get cold again and then slowly make its way back up to heat. Could you please give me some insight on these two issues?
1- possible the aux is water pump is getting heat soak and not working once shut off.
2- could be a failing stepper motor for the rear.
I would check the aac module for codes and or get a better scanner that can do bi directional control so you can activate those items to test. That would be my suggestion
@@MasterTechLou I did replaced that circulation pump already with no change. Why or how would it get heat soaked?
2: Is the aac module something I can see on my scan tool I currently have?
3: What would be your recommendation for the next up scan tool that control the vehicle? I don’t want to drop 2000 on a scanner when i’m just doing my own vehicles lol. Thank you for all your help!
@@00700556 if you peruse through all of my review videos you may find a scanner you like. Funny how people leave out information such as you did with already having replaced the aux pump. with this old car the issue can be as simple as poor connections at the ac control panel, I have helped many over the last few years with weird issues because the connections had many a slight film or corrosion that you cannot see on them, but once the ac control unit was disconnected and reconnected it worked fine. which lead me to the assumption it was just forming poor connections.
Hello! I just purchased my first MB, it's a 2006 E350 with 60k miles on it, no codes, no issues, but I'm very DIY passionate, so I just want to know what's the best budget OBD scanner for MB that you would recommend, knowing that I'm not a mechanic, but do understand a lot of the scanning and programming basics. Thanks a lot!
@@frnkto69 I have a ton of reviews on scanners. Im sure you’ll find something you like
Thanks for this video, can a mercedes dealership can discover if the odo meter was rolled?
you cant roll an odometer.
if you replace a cluster, after 500 mile the correct mileage syncs up.
the mileage is stored in a few different modules, so yes we can look to see the mileage inside the modules.
@@MasterTechLou thanks for the reply
@@ramiabed6716 anytime!
Damm you the man that scans ✌🏻 nice
geo pin thank you, just tryin to help people understand the function so they know how to proceed:) much appreciated. Be safe.
Up until a week ago my Icarsoft helped me a lot. The machine told me to fix several sensors over the years. Unfortunately a week ago it started to message "Fault in communication with ECU" when I look at Engine fault codes due to my check engine light being on again.. It still works with all the other options like transmission etc. Any hints would be appreciated.
It is not the scanner, it is a problem with the car. If you can reach out to me at www.cartechconnect.com I can assist you with diagnosis. thanks, Lou
I'd be impressed if someone would do a video about a decent and affordable bidirectional scanner that would actually work with a 1999-2003 CLK (W208 A208)
Hi Lou, very good video, i finally understood that i have not to spend 3k for a star dignosis to do a simply owner scan without programming needs. The question i kindly ask you is if this device is able to scan on a 2005 SLK r171 and in particular on the vario roof system. I'm quite sure i have switch which doesn't work properly but i want to be sure before to disamble all the lining.
Thanks and good luck
Giovanni from italy
Yes from my experience you can read the soft top module and the switches. I hope to visit Italy in the very near future!
Great video, I recommend this scanner to, I actually have CR Plus version cause it can read other car models and I enjoy using it, but not sure if I am missing features that are in the MB 2, I did get SDS and looking forward to learning it, your a good technician, I wonder why you don’t have more Subscribers, I think me and you need to collaborate
hi there, this is Jessica from iCarsoft Inc.
Appreciate your support at first.
Please kindly note that the differences between CR Plus and MB II are that
1. CR Plus can work for 44 brand vehicles while MB II can only work for Mercedes-Benz/Sprinter/Smart;
2. CR Plus only work for 4 basic Systems(engine, transmission, ABS and airbag) diagnosis while MB II can work for full systems diagnosis.
Now we have one new item CR Pro can work both 44 brand vehicles and full systems diagnosis.
You can learn more details from below link:
www.icarsoft.com/Product/s-370-iCarsoft_CR_pro.html
Jessica
Skype: bongch503
Email: scanner01@icarsoft.com
Hi I have a w210 320cdi but lot's of issues beacose its only have 38pin connector and not all them scanners working with it... Can you recommend any good one please?? Thank you...
I am pretty sure the icarsoft does you can order an adapter.
check their website.
How can I check for misfires i bought this scanner for my 04 e320. Appreciate the video
thank you, in the engine module, in live data, smooth engine running.
Lou
I need your help... By watching your video I just order that scanner
You can reach me at www.cartechconnect.com I will do my best to help you.
Thank you. Lou
Hey Wassup I have a 2006 c230 Sport one day I was driving and speedtronic drive to work shop popped up on the screen an shut off while driving an now its no crank no start what should I do.
Thanks great video
Great explanation!!!!
Thank you!
Thanks I gonna buy this scanner
I have a 2007 CLK350 - transmission slips first start when engine is Cold - does once then shifts fine - Module ?
No issues once engine is warm - just purchased this scanner tool on your recommendation
Thanks
Cecil
Are you new to the car? Our cars delay the first shift to help warm up the converter. So to me this sounds normal at the moment.
@@MasterTechLou yes, so the car needs to warm up for a couple minutes prior to shifting into drive and going.
@@123corvette12 regardless it will
Still delay the first shift.
However it can still be excessive if the fluid needs changed so although its normal there can still be an issue causing you to notice it more.
Hi, just saw the Carsoft video. I have 3 Sprinters, all diesel, 2016,17 and 18. I bought the carsoft 2 years ago and it didn’t recognize the VIN for the 2018. Question is, will this version or any allow the countdown of starts after the repair/condition has been fixed. I now have 1 that had the DPF clogged/ cleaned and replaced with 5 starts remaining. Love your video.
Hello, thanks for the nice comments,
Diesels are tricky and they suck to say the least. When the fault codes happen and you get the countdown, you basically CAN NOT ATTEMPT to erase codes or you now have to visit the dealer as you will lock the module into tamper mode. Basically in a diesel, the computer has to run the test for the failed component and pass the test and then and only then will it erase the code itself or set the code to stored and remove the remaining starts. here is my cheat sheet I share with people outside of the dealer.
Diesel Diagnosis
once a fault is registered over 2 different drive cycles (start, drive, shut off, cool down, start, drive ) the check engine light will come on. if the issue affects emissions greatly the remaining starts will come on if the issue is not resolved in a unspecified period of time.
in the shop we run the codes (perform quick test which runs down the list of modules and check faults) then we see the codes and process them ( we high light and click the code it brings us to the test steps of each code) once we perform the test, it will either lead us to replace the part, or it will show "ok to erase fault codes" (not verbatim),
only then can we erase the codes.
for the consumer.
if you have a fault code, you can replace the part.
start the engine and drive for more than 30 min above 40mph with out stopping.
the engine module will self test and erase the code on its own and the remaining starts will disappear if the remaining starts was active.
however once you get to 4 remaining starts you now have to go to the dealer, up to 4 remaining starts you can reset the starts to 12 IF you have the right scanner like a higher level scanner. Like the bidirectional ones .
Have you given up your website? Having a couple issues with the iCarSoft MBII and a W203 C class. Would love a couple hints to get inside the system to see what’s up…
I have yes. Sorry, I can still be reached at Diagnosisunlimited@gmail.com If you need help.
Best video on this iCarsoft Mercedes II MB II scanner, on your advice, what is your suggestion to have between iCarsoft Mercedes II MB II & iCarsoft Professional Multi-system Auto Diagnostic Tool MB V2.0. I have Merc CL600 and Jaguar S-type. And which one could clear code for those cars??Thank you in advance
Thank you for the nice comments.
I would get the mutli system. best bang for the buck, that is a great tool for the price. I believe it is called the CR Pro. Thank you, Lou
Thanks for the video. Before i buy that Scanner. Can he read Airmatic data, such a level sensor, pressure from the Air pump?
Yes this does. I do have a icarsoft v2.0 for mercedes if you are interested. If you are within usa I will sell to you at a great price.
@@MasterTechLou Thank you, but i live in East Europe. Anyway, great videos, +1 Subscriber!
Kristian Kumanov well thanks! More to come as well as the v2.0 review. Thanks! Be safe
You are not only knowledgeable, you sound comfortable and confident. Thank you for that. I own a 2003 CLK500. I was going g to purchase the i980, but this seems very much worth the few extra dollars. Correct?
mateshaljc no the i980 is a step down. Thank you for your nice compliments, I appreciate that. I hope to help and educate. Thanks, Lou
My brother surprised me and purchased the i980 for me. I talked about it so much lol. Hopefully it will suffice. It will be delivered in a couple of days. I'll reach out if I have questions. Thank you.
Received my i980 last night. Plugged it in today. Reviewed all the codes. I would like to sign for your services. I went to cartechconnect.com and considered the tier 2 service ($32). Can you tell me what specifically that service will grant me. Additionally, once I sign up for a service, Can I upgrade to the next tier if more assistance is needed.
@@mateshaljc it is basically a fee based on the issues at hand, it is not a monthly fee it is a fee per issue so to say. I will work with you to fix your issue. thank you for checking it out, I hope to hear from you.
Lou
@@MasterTechLou Just submitted the ticket sir. Thank you.
Hey love your videos! I have a 2014 GLK 250 and was wondering does this iCarsoft have the ability to reset the AC, the AC sometimes works and when I take it they say they just “restarted the computer” kind of thing and boom it’s all good, so looking to get this so I don’t have to pay 150$ for a guy do to a 5 min job I can hopefully do myself with something like this
Hey thank you for the nice comments, yes this can, basically if your ac light flashes at you, you have a low pressure code that locks out the ac compressor. so you will possibly need to have the freon checked. but yes this can do that. Thanks for enjoying the videos !
Lou
Hi Benz Tech Lou P.,
Great video. Very understandable as well. I own a 2008 c300 that will not start. All the lights come on with the exterior, most of the lights on the dash come on, all fuses are fine, and the radio will turn on. The horn, the windows, the sunroof, and brake lights will not work. The EIS has been replaced about 9 months ago, so my question is: Will the MB 2 work to diagnose a car that won't start? Also any ideas on the issue?
~Michael
Michael King thank you for the kind words. One thing I need to make a video of is a scanner does 10% of the work. Its understanding what you are looking for that’s the other 90%. It sounds like you possibly have a bad relay. If you need help with diagnosis this is what I do. You can contact me at www.cartechconnect.com thanks Michael.
Hi, Just watched your video on the MBII Scanner. I have one and have been told that with an iCarsoft 38pin to 16pin OBD adapter it will read my Mercedes 1996 r129 SL500. Have you had any experience in this. Thanks in advance from Australia...George
Yes from my experience you can read older cars with the adapter. But sometimes there can be an issue with faulty adapters so purchase wisely.
How’s it going , great video , I have the mb2 and I’m trying to read for the abc system, I have a 2003 s55 amg and I’m trying to figure out after I drive the car is quickly goes to sitting low , when I start it 10-15 seconds it jumps to normal height , I’m trying to see how I can read the scanner to find out what is wrong , thanks
kmobthm you need to watch the acceleration sensor values, if they are fluctuating when the car is not driving you have a bad sensor.
kmobthm also thank you for the nice comments, I really wish to help people. More to come, hope all is well with all of my subscribers and their families during this crazy time.
I have 2004 s430 need a scanner that can program a transmission module. What scanner should I purchase?
Thank you for the great video, I have been a technician in a busy shop but am retired now I enjoy watching someone who is clearly experienced and knows how to relate that experience to others. I have an RV on Sprinter chassis. is a 2015 Sprinter, the sprinter has been known to have some ABS sensor problems. my question is ,will this scanner find and pinpoint exactly which one if any sensor is failed / I know that is an electrical value and I suspect a low mileage vehicle can get rust/corrosion on parts where it is less likely on a typical 15K mile per year vehicle. also I noticed the unit you have there has MB 2 on screen is that the same as the iCarsoft Auto M900 V2.0 Mercedes I am finding on Amazon for $140.00 ? thanks again for great information
Thank you Frank for the nice comments.
The v2.0 is identical with a few enhancements.
it will work just the same. Yes it should read the esp module to help you narrow down the issue and show live data to help you define the problem. If you are experienced then this will help you get to the root cause.
Thanks again!
Lou
@@MasterTechLou I have the ESP ASR BAS fault message displayed , some internet source says it can be the light break switch, but could be other things. Do you have any advice ?
@@sprinterfreak6383 hello, please watch my newest video on this very issue. thanks
Actually, i have another question as well since you're an expert on Mercedes. I also have a W203 C180.
My windscreen wipers don't work. The fuse is ok, and i can't check the relays because there's only 2 relays in the car and they both operate the wipers.
Anyway... If i push the wiper stalk forwards, i can twist the stalk and the wipers work. I can do that during the day and it's not a problem but obviously i can't do that when the lights are on because i'd be using full beams and blinding everyone.
I've brought a new stalk and i'm going to fit it this Friday (30th September 22) but it's a little bit of a hassle so i was wondering if you have even seen this issue where it wasn't the stalk?
you have a bad wiper stalk it sounds like, as for the dpf issues, a clogged dpf is usually due to age if not oil loss . but the scanner may not tell you why its clogged. you would have to remove the dpf and see inside.
it's good for the home mechanic I have Volvo
Thanks I have ordered scanners and will be doing new videos soon and selling the scan tools .
Pretty good credentials. Congrats. I have a MB 2008 e350 4matic (vin WDBUF87X58B357576). I am inundated with "check engine" the latest being P0030, p0050, p2237, p2240, p2015. The O2 sensors are relatively new. What next? The p2015 is present once I get another code.
I just bought one mine doesn’t have the stuff yes have like I don’t have the odb2 option
You may want to try updating or just return it if it doesn’t have all the features you see others having
Lou i have the same type only my tool is vaws V2.0 for Audi, Skoda, Volkswagon and Porsche vehicles would mine perform exactly how you showed would allow me to access my Audi Q7 3.6L V6 components as you have shown here ? If yes and you have any technical experience working on what i have i would like to speak further with you upon same.
Yes should work the same as I also have the vw version and have used it. I work in a audi, vw, porsche, mercedes dealer.
Lou- I just got the Icarsoft MBII & wondered why the fog lamp error which shows up on my instrument panel doesn't show up in the scanner. Which module should I be looking at to see this. Thanks in advance for your help. Alan Craig
Alan it would help if you told me what model you had, but depending on model it will be in either left front sam, right front sam, or just front sam. All depends on the model. But lighting will always set codes in a sam module. Hope this helps.
Nice video, Thanks, I just subscribed to your channel. Just wonder if that's the latest version of the scanner. Thinking about buying it for my 2010 Mercedes C300.
RIchard Davidson I have a v2.0 which the company says is better. If you could buy it off me that would be great. Im a seller now and working on adding them to my site www.cartechconnect.com
You can email me @ diagnosisunlimited@gmail and we can arrange it. Your call. Helping out the little guy :)
Thanks.
Great videos Lou, I bought the scanner and 8 codes pop up multidisk brake control 3, clutch control 3,torque converter 1 and working pressure control Solenoid valve 1, I think the conductor plate is bad? Any help would help me decide if to change that or not thanks! Subscribed
Cynthia Noriega thanks for viewing, I wish I could help and I know I can but I will not diagnose via comments. If you reach out to me on my site I can surely help. Thanks, be safe. Lou
Great video!!!
Can iCarsoft delete suspension Malfunction message on 2009 GL450? Or does Malfunction message disappears on its own when problem is fixed? Thank you
Watch my air suspension video. It will answer all those questions
Hey Lou having prob with a 2008 Smart / 451 not cranking over! battery, fuses all good i can hear 2 relays when trying to start the one most notable is right inside the cover next to the fuses which according to my schematic is not the starter relay its further up inside the SAM! but it seems to sound like its a delayed click a second after i try starting. now i can add 12v to the violet wire coming out of the Sam that feeds the starter solenoid and engine will crank but wont start, it will with a little pinch of ether so injectors/fuel pump not receiving signal either! im in Nevada 300mi from nearest smart dealer need some help my friend, i know i need diagnostic equip MB Star Xentry C3 or C4 or something in that nature so if you got any suggestions or point me in the right direction i would appreciate it, i feel dumb up against that Smart i can fix & build anything pretty much from ground up but im no computer wiz when it comes to these newer vehicles! Thanks ✌
does the dash show P for park? or 3 dashes, your issue might be the shifter., very common.
@@MasterTechLou There are no lines or key displayed & the display shows all the shifter locations, i did remove the shifter cover and the little green light on the chip from the transponder coil does light up when i try to start. now for the record this is the first time ive ever even sat in a smart so not sure what is normal for the display. im still trying to find out what the previous so called mechanics replaced or took apart before me! for what ever reason the steering wheel & airbag was removed & laying on the floor when i got the car so i put it back together but dont think that would trigger the no crank issue! now i did talk to the owners & there willing to purchase the diagnostic tools & software if needed so that we could repair it ourselves because otherwise we would have to take it 300mi to a dealer in sacramento probably have to make atleast 2 trips just not feasible! i checked your website out little confused but im willing to pay for your services if you think you can help me with this matter, im a pretty knowledgable wrench so shouldnt be no problem trying to diagnose this smarter than me car lol i know theres prob only so much i can do without the diagnostic tools so id like to exhaust all my options before we purchase the whats needed! if you need my email let me know Thanks!
Thanks Lou! I just ordered one for my 06 Audi A8. It should have just come with the car. Lol! Your video is great! I feel like I understand a lot more how this device works. Do you diagnose Audi's? If so my ABS/Parking brake light comes on within a few min of driving if I go below 5 mph and the steering becomes less dampened. If I turn the car off and on the steering dampener is hard to turn plus the speedometer won't work in addition to the warning lights. If the car sits for an hour or so the light is off like nothing ever happened. I am hoping the icarsoft will show me what is failing. The radio changes volume when this happens to. 🤨
Hey This Guy thanks man, sounds like a wheel speed sensor issue. That is most common also since the audio is speed dependent.
@@MasterTechLou Thanks Lou. That's what everything on the Audi forum is pointing to. My icarsoft will be here tomorrow. Thanks again Lou for getting back to me so quickly. I am going to show your channel to my MB friends.
@@marcissobadass Thank you so much, also share my website www.cartechconnect.com I can help with all car needs, well, most. If I cannot help I know someone that can.
Thanks again, Lou
Hey Buddy what's up, I really enjoyed your teaching about Mb cars, I am mb mechanic and will like to have the mb v3 icarsoft for my workshop.
Thanks I appreciate that. I have yet to get a v3.0 but I think its close to an autel for the most part.
@@MasterTechLou your website is not going through what's going on?
@@udohequere6042 I had closed it. I have too much going on personally, if you need me you can find me on www.justanswer.com in the Mercedes section.
@@MasterTechLou no problem at all, I will relate with you there thanks
Hey what’s up? Glad I found you. Which scanner is compatible with a w208 - clk430 1999. I’m having trouble finding one.
Matthew H this one should work you just need the adapter from 16 pin to 38 pin.
Lou, thanks for your most helpful video. My situation is chasing down a very frustrating parasitic battery drain. I think i have it narrowed down to battery control module or k57 relay. My question (using the same scanner as you) is while scanning the BCM data stream should I see charging current running through it? I actually did a reset of the f30 circuit by unplugging the bcm for a short while and then after re-connecting, the fault for the "open circuit in k57" did not re-appear. The software status of the bcm was given as 22/05. Not sure if this is the updated 2nd gen software as provided for by MB recall 31-3-2005.
If a software update would fix this issue it would save me major coin ($600 app) for a new bcm. Any ideas or input, thanks in advance Bill R PS. I am not a mechanic by any stretch!
Thank you for the nice comments,
Parasitic drains are easy but tedious. I can help but I shy away from doing diagnosis in the comments, if you need help please reach out to me at www.cartechconnect.com, thanks again. Lou
Is working for Benz E300 bluetec hybrid?
Yes I think it does.
My 2008 dodge sprinter 2500 showed PO715 code(speed sensor), which I replaced the conductor plate and now trying to get out of limp mode. After runaround from various mb mechanics , I’m reaching out to you on my next step. Thanks in advance.
P0715 tells me you are not using the right scanner
and you need to use the scanner like this one to erase the codes in the transmission control module
if you never erase the codes in the transmission control module the trans will remain in limp mode.
Hello ! Could you give me any advice for reading default on gearbox 722.6 in a W210 with the 38 pins port ? This reader could done it ?
Yes you need the adapter for the 38 pin port
Hi Lou. Thanks for your videos. Very helpful.
Is this scanner going to work well with a W220 S500 '99-'00?
Thanks!
Pablo Fernandez Padilla thank you so much, yes it will work perfectly for this model.
@@MasterTechLou Thanks so much for the info, Lou. All the best.
@@pablofernandezpadilla8924 Thank you, you as well!
I bought anicarsoft of someone off the street and I need help learning how to work it. So I can diagnose my Mercedes’ cars
Sorry Lou, I didnt tell you about the car. I have a MB 2001, S500 with airmatic - non 4matic. Thanks
rm102155 no and no one should EVER enter calibration mode on any scanner OR also road test most in ESP. Only the dealer should calibrate ride height. This is a very tedious process and anyone that enters this mode on a star diagnosis or other scanner is in for a world of hurt.
Can you command the om642 diesel EGR open and close with this scan tool. If not what scan tool can do that. I am trying to clean the EGR system with the motorvac EGR cleaner.
NO this one cannot, only a bi directional scan tool, like autel or launch. But def the star. mbstartool.com
I already have this scanner
if this is 5 years old mb2 scanner i dont have to order latest version?
I got a 2020 gle 350 4 matic will this scanner works for my model let me know thanks
I would get the v3.0
Hi I got the scanner and I have a issue whit the ABS light I use the scanner and says is on test drive mode the any way to turn that off thanks.
ah the infamous road test mode. that mode happens when someone uses a scanner that doesnt know how to use it, and enters road test mode. this happens like 100% of the time. I can help, you will need to contact me on my site please. thank you. www.cartechconnect.com
Hey Lou, good tutorial, I subscribed. Does the Icarsoft V2 read trans temp on the X204 GLK 350?
Thank you, yes it does. It reads live data in the transmission module.
I have a 08 mercedes s550 would that device be able to program the ism module.
This doesnt program anything.
Also only the dealer can successfully program the ism as its an anti theft part. Finding other ways to do so can be accomplished but its rare.
hi lou, great vid, will this fault code reader reset adblue countdown / communcation errors, its for a w205 c250d, thanks
No it will not, youll need the autel or mercedes star diagnosis and thanks!
@@MasterTechLou thanks very much for the response, really useful channel and subbed. which autel one do you refer to for doing this on a budget as i see many ?
@@MrKams1 check out @DCF garage, he got a mk808 that seems to work well!
You have to select model each time. .? Or does it save model?
Dan Walkley select each time from what I have experienced. Thanks, Lou
Just used it, changed my oil and filter,, and reset oil service light with it.
david gerald you can actually reset service intervals through the steering wheel buttons but it can be smoother with the scan tool.
@@MasterTechLou I couldn't get steering wheel buttons to work.
Hi, I have a 2004 s500 4 Matic 5l v8 engine and my teleaid malfunction drive to the nearest dealer is on can this clear it? if not how can I clear it and what obd code reader will clear it. thank you.
This will not clear it you will have to have a shop remove the teleaid fiber optic connector, install a bypass loop and then have them code the audio and instrument cluster to show “not installed” for teleaid and the warning will never come on again.
@@MasterTechLou how much will this cost? a estimate would be great. thanks
it be great if you did a video on this teleaid bypass I think there is a lot of interest. thanks your video are great.
I have a 2013 c250 V4 and a 2017 cla250 v6
What is a good price point for my application.
I replaced both front wheel bearings. When I replaced the passenger side the abs light came on and the cruse control doesn't work. Message on the center display. I changed the driver side on now the when you start driving away the front brakes come on for a few seconds then release. Then the red brake light comes on the display. The speed doesn't read until the brake light is on.
It's a 2007 ml320 cdi.
Thanks for any info.
It is very important to know that the wheel bearing has a magnetic ring only on one side of the bearing and that is what the sensor reads. Most likely the bearing was installed backwards and now you need to replace it once again. To test you use a paperclip on the end of the wheel bearing to know which side the magnetic ring is on. I hope this helps. Lou
Hi, I have a 2005 C230 with an error code P0366 (cam shaft sensor). I changed the cam shaft sensor but the code still comes up. I have an iCarSoft MB II. What, if anything, should I look for to troubleshoot the problem? Thank you in advance.
Hi, does the tool also read the ash content of the Dpf (like star diagnosis)? I mean also the total ash content (not only the ash level that resets to zero after a re-gen). Thank you very much and great video!
Thank you, this i do not know 100%. I have not personally seen this, if I have a chance to check out in the future I will surely let you all know, but for now I have no idea.
Normally the scanner can read everything the star can, it has been very good So i want to say yes but I also want to be right haha
Lou
will this tell me which Heater AC actuator is bad?
Yes kinda. You will either get a code for a single actuator or a code for no communication with all actuators.
Hi Lou, merry Christmas great tutorial I just subscribed! quick question for you, I just installed my new vacuum pump on my SL550 2008 do I have to reset the system in order of for it to function? it's not doing anything... thank you in advance and merry Christmas
Merry Christmas as well thank you!
Most likely blew fuse 71 in rear fuse box. Check my r230 video for the location. Lou
Hi Lou hope you're doing well.. quick question I change the fuse on my S L550 it was regarding changing the vacuum pump it's still not working, should I just buy one of those scanners to reset the system... Will the dealer be able to do it for me ? I really appreciate your time
@@polojackson21 you don’t need a scanner. The pump most likely fAiled. Or has corrosion in the connection.
I have a problem for the mercedes sprinter van 2023. I took the chair out and put it back in and a light comes on for the chair. Did you know how i could fix this, thank you.
You will probably have to use resistors for the airbag connections.
I subscribed to your channel today. What bi-directional scanner would you recommend for a Mercedes Benz owner? Can a used Mercedes-Benz SDS Star Diagnostic scanner be purchased? If so, what is a good price and place to find a used SDS? I like to do as much work on my Mercedes Benz automobiles as possible. Thanks in advance for your help!
Flynt Myrick www.mbstartool.com is where I and others purchased the reman sds scanners. Best one you can buy. I also have a video on how to use it. $700 but well worth it in the long run. Only thing you cannot do is software updates and programming however it looks like the newer versions you can. I have not contacted the company yet to see how its done but some things you will still need the dealer for. However, you will have been Informed ahead of time so you can at least filter through the bullcrap :)
Hope this information helps
Lou
@@MasterTechLou Thanks for the information and I watched the "how-to" video earlier today. It was a good video and thanks for making it and sharing with us.
Flynt Myrick thank you , I will be using my 20+ years experience in Mercedes and the automotive world to assist others. Please check out my site as well. Www.Cartechconnect.Com
Please share with others that may benefit from my videos and if there are any requests I would love to hear them.
Lou
Will the scanner check my interior heater rheostat? Thx .
I have battery light ON..I tested battery and alternator ..Working good.What is problem ??
2019 MB sprinter cargo van(3 l,6 c.turbo
sead begovic I don’t know. Nor do I diagnose cars via comments. Sorry. You can reach me at Www.Cartechconnect.Com
Currently have a 2007 e550. Need a scanner. Bluedriver lsb2 or icarsoft mb v2.0. Im buying one today and im torn between both. would like to be able to figure out codes and reset them if possible. thanks.
FUEG 617 blue driver is junk.
For just reading and clearing, icarsoft.
What do you think about the Autel MK 808BT scanner
This video was helpful, however can you tell me if I can recalibrate the airmatic system using this the scanner? I have recently changed the front suspension on both sides (not the airmatic shock and upon completion the car sets low on the right by about 2.5 inches. I am sure I have to reset the calibration for the airmatic system. I have found the procedure but need a scanner capable of doing this. Do you know if the iCarsoft MB II will do this. Don't want to buy if it will not. Thanks for your help.
i try to go to your website but it seems is no longer there do you know if it diagnose airmatic issues i am havin issues with my airmatic 2008 gl550
I closed my website. This scanner can read airmatic yes.
I have the MBII scanner for years now. On the live data stream can it pick up misfire with no CEL? I have a very slight misfire at idle comes and go on my bi-turbo M276. I have 76k miles and the spark plugs been replace around 45k miles.
There is a misfire counter under smooth engine running option. However you can still have a slight misfire but the module not count it. They tool away the screen that shows a time frame between cylinders firing. So only way to find a slight miss is with a scope.
Thank you. I drove the M276 (W166) all day yesterday and did not misfire at all. I have a Snap on scanner and a MB Star scanner at the shop. I do another scan this weekend since I need to work on a E55 W211@@MasterTechLou
It has not misfire in couple of days. I believe there was water in the gas when I filled up at Sunoco. After I heard on the news that in my state/district Sunoco is contaminated with water and leaves in there gas. I switched to Exxon and I have not had another misfire.
2013 c300 ac light blinking got refrigerant filled does this tool clear the the fault code to reset ac blinking light
@@traps716 yes it can
@@MasterTechLou thanks!!!
Hi Lou, thanks for taking the time to post this video as I'm thinking of buying the iCarsoft for my W221 2007 S550. You say you recommend for the average diy person but it seems more advanced. I'm having trouble with starting the car sometimes so I want to diagnose the problem but it seems that if I use this device and diagnose it, it won't show the issue but rather a list of options I then have to choose from. Am I understanding this correctly? What's the use if I'm not a mechanic and don't know what to select or look for? Any help would be appreciated.
thanks for reaching out, the scanner does 10% of the work, a knowledgeable tech that knows how to interpret the data and what to look for does the other 90%.
this may not help if the issue is random or it may if the issue actually set a code,. the trick would be to use the scanner when the car is not functioning to see if there is a value that is not allowing it to start. Hope this makes sense.
@@MasterTechLou thanks for the quick reply. My issue is with starting the car (harder time when it’s cold out) I’m thinking it might be an ignition coil. If I hook up the device, what do I have to look for to see why the car isn’t starting? Appreciate any info but I would think this isn’t a device for the average diy’er as you need a good amount of knowledge to do the 90% you mention. Thanks again
@@bobbye4731 sorry my friend thats as detailed as I will and can get on youtube. if you need help you can contact me at my website, www.cartechconnect.com thank you.
Be safe,
Lou
My gl450 Mercedes 2010 is stuck in rig test mode after using the same scanner you have. How can I clear the dash with this scanner
Its tedious, you have to enter the test mode and perform the test. Not 100% sure this scanner can do this, I THINK it can, but I have not done it myself
And all other options works
How would you reset computer? Clear codes?
It shows in my video just select the erase codes option.
The word “reset” is an overused improper wording
I know this is an old video so i hope you read this message.
I have a W204 CDI 220. I've a generic fault code of DPF blocked on my basic scanner. Would the Icarsoft be able to tell which component failed to cause the DPF to become blocked? I know it can force a regen, but there's not point forcing a regen if something like the pressure failed and that's what stopped the DPF doing it's regen in the first place.
EDIT: I have just purchased the car and it's in limp home mode so it wasn't me who blocked the DPF so i don't who how/why it was blocked).
Great video 👍
Bit of a long shot but will it activate the 'Rodeo' mode?
Thanks! No this scanner has very few functions it does, mainly erase codes, service lights, relearn steering sensor, other than that is does not control the car in any way.
You don’t need rodeo you can just raise and lower the car to bleed the system if thats what youre after. Thanks again, Lou
great video i have a 2007 mercedes benz e350 4matic my radiator fan runs real fast when my car is off my a/c works perfect only problem is the fan what you recommend i should do.
Watch my video about this exact same issue.
I have 2007 cls550, does it read Airmatic suspension problem? (stop car too low).
thanks Tien Trinh
Tien Trinh yes but stop car too low isnt a fault its a physical fault. You most likely have a leak. You only have a code when the dash says “visit workshop”