Traxxas Trx4M High Trail Cheyenne 10 Upgrade Series #2 Installing Injora High clearance links 

Поделиться
HTML-код
  • Опубликовано: 17 дек 2024

Комментарии • 82

  • @talldude4394
    @talldude4394 9 месяцев назад +1

    Really happy I found ya page! Just got mine it’s my first RC. Looking forward to upgrading it!

    • @rcfungames
      @rcfungames  9 месяцев назад +1

      Thanks dude! And welcome to the RC world, and RC Fun&Games! I am really glad you like the content and that you find it helpful.
      I really appreciate the support
      🤜💥🤛

  • @countrycrawlers4713
    @countrycrawlers4713 Год назад +3

    Super cool instructions and very nice first run my friend! 👌💪😀😀😀 Well done! 💯💥Have a nice week !😀

    • @rcfungames
      @rcfungames  Год назад +1

      Good morning my friend and thank you so much ✌️😉
      I really appreciate your awesome comment bro.
      You have an awesome week too dude 🤜💥🤛

  • @darrenmackenzie1645
    @darrenmackenzie1645 2 месяца назад

    Very nice video ! Cool backyard course.

    • @rcfungames
      @rcfungames  2 месяца назад

      Thank you very much 👊😉
      I really appreciate your comment, and thank you so much for watching 😁

  • @robertsalazar2212
    @robertsalazar2212 Год назад +2

    Bro your backyard is mystical

    • @rcfungames
      @rcfungames  Год назад +2

      Hi bro 👋 and thank you 🧙‍♂️🧚🐉
      Really appreciate it 😊👍👍👍

  • @lukewaggoner5533
    @lukewaggoner5533 4 месяца назад +1

    Thank you again for your videos. They always help me check to see if I’m doing my installs right.

    • @rcfungames
      @rcfungames  4 месяца назад +2

      It's a pleasure bro, thank you so much for watching and always leaving a comment!
      And I apologize for that late reply, as I've not been feeling well.
      Hopefully soon I'll be back up and posting videos 😅

  • @rickbarg3980
    @rickbarg3980 11 месяцев назад +2

    With that new transmission block you have room to remove your drive lines ,sweet.

    • @rcfungames
      @rcfungames  11 месяцев назад +1

      👍👍👍👍💯💯💯🤜💥🤛

  • @andrewrichey7374
    @andrewrichey7374 10 месяцев назад +1

    Awesome water feature love it, I’ll be watching for the next one until then peace and chicken grease 😁👋👋😎

    • @rcfungames
      @rcfungames  10 месяцев назад +1

      Thank you so much buddy 😊
      These are the kind of comments that make it all worth it! so thank you very much.
      That's awesome I will see you on the next one my friend peace and chicken grease! 😂 ✌️😉

  • @nickbromage29
    @nickbromage29 3 месяца назад +1

    I have the same rig, put the same link kit on, have the stock wheels and tyres on it and the inside edge of the front tyres rub on the springs on full lock and it starts hopping!

    • @rcfungames
      @rcfungames  3 месяца назад +1

      Yeah the stock axles and set up is not great as it catches the shocks.
      That's why I always go for that 4 mm extended axles.
      You can always just get some 6 mm spaces, that should your problem out 👍

  • @datrain780311
    @datrain780311 10 месяцев назад +1

    Super helpful. Thank you.
    However, with the 59mm shocks my front drive shaft was binding as the angle at the transmission was very steep. Went with a 56mm shock (53 mm hole to hole) instead.
    Less drive shaft angle and will give me a better look as i am doing a F150 monster truck build

    • @rcfungames
      @rcfungames  10 месяцев назад +1

      Awesome!! I'm glad to hear that!
      If every single video just helps one person it makes it worth it.
      Exactly in my opinion the 59 mm shocks are just overkilled and cause more problems than it's worth!
      I think two videos after this one is when I fitted the 53mm shocks and I explained exactly why I prefer running them on the Traxxas trx4m and and the best setup to eliminate torque twist.
      I think you've definitely gone the right way it will definitely be a better set up all round!!
      Thank you so much for watching bro and leaving an awesome comment.
      🤜💥🤛

  • @Adam_Oden
    @Adam_Oden 5 месяцев назад +1

    Thanks for this video. Will be a great help as I install mine.

    • @rcfungames
      @rcfungames  5 месяцев назад +2

      Hi Adam, I'm glad that once again the video is helpful!!
      Really appreciate you watching my videos and always commenting.
      Thank you so much bro 🤜🤛

  • @s0lidjesus885
    @s0lidjesus885 7 месяцев назад +1

    Thanks for the video! I probably would have skipped the spacers otherwise.

    • @rcfungames
      @rcfungames  7 месяцев назад +1

      Thank you bro, I'm glad the video was helpful!
      I really appreciate you watching and commenting 🤜🤛

  • @kioti20008
    @kioti20008 Год назад +1

    Great video can't wait to get started on mine

    • @rcfungames
      @rcfungames  Год назад +1

      Thanks bro 🤜🤛
      You going to love it!!
      I always like throwing on one upgrade at a time to experience what it did for the overall performance. 😅

  • @theadventuresoflario
    @theadventuresoflario 8 месяцев назад +1

    Perfect, my kit arrived for my defender today...

    • @rcfungames
      @rcfungames  8 месяцев назад +1

      Cool! Let the fun begin 😁

    • @theadventuresoflario
      @theadventuresoflario 8 месяцев назад

      @rcfungames have to say your video has explained exactly what I need to do. Thank you 👍🏼

  • @guillsevilla
    @guillsevilla 8 месяцев назад +1

    I watched all your videos! Haha all very informative! For someone who is been used to bashing, this is all foreign to me lol keep it up bud! 🎉

    • @rcfungames
      @rcfungames  8 месяцев назад +2

      Hi bro, I really appreciate you watching all my videos! That's some epic support to the channel!!
      Thank you very much!!
      I also started in this hobby by playing with much faster rigs and it was all about jumping and bashing them!!
      But I learned that the crawlers are a much, calmer side to the Hobby!!
      You also end up not breaking as many parts playing with these.
      When I first started out I can't say they was any crawlers that were decent!
      But since I've restarted in the hobby there are so many different brands and setups available, for all different types of crawling
      From scale Trail crawling to comp crawling! It's all a lot of fun and really got me hooked.
      I'm so glad you enjoyed the content and I really appreciate you watching and taking the time to leave me a comment.
      Welcome to the crawler world buddy 🤜💥🤛

    • @guillsevilla
      @guillsevilla 8 месяцев назад +1

      @@rcfungames all your builds and how you solve the issues are good points and your camera angle is perfect for individuals that are visually stimulated for learning 👍 keep it up and more vids on the high tail! Planning in getting one for myself hopefully on my birthday!

  • @SebastienMongecadet-rq8vq
    @SebastienMongecadet-rq8vq Год назад +2

    Super vidéo 😊

    • @rcfungames
      @rcfungames  Год назад +2

      Hi bro 👋 and thank you very much
      🤜💥🤛

  • @andyjones357
    @andyjones357 Год назад +1

    Loving the links and skid plate I might switch my power hobby links lol

    • @rcfungames
      @rcfungames  Год назад +1

      I can't complain about the quality from Injora. So far I have been happy 💯

  • @Noprepfelons-bz4up
    @Noprepfelons-bz4up Месяц назад +1

    When I put the rear ones on I could not put drive shaft in place and makes where the axle bends and can’t put the shock in place

    • @rcfungames
      @rcfungames  Месяц назад

      You must be putting your links on wrong or you got the wrong set of links?!
      If you're on Facebook find me there and send me some pictures
      facebook.com/share/15U1Swoz1H/

    • @Noprepfelons-bz4up
      @Noprepfelons-bz4up Месяц назад

      @ I put them on how you did and my there the right ones of the injora web site

  • @andrewrichey7374
    @andrewrichey7374 10 месяцев назад +1

    Awesome appreciate the video I will be ordering me a Set

    • @rcfungames
      @rcfungames  10 месяцев назад +1

      Andrea I'm really glad to hear the video was helpful! After all the effort the person puts into making these videos these are the kind of comments that really make it worth it!!!
      You will definitely be more than happy with the quality and the performance gains from the high Clarence links just don't forget to put two spaces on the upper links to improve suspension travel and the angles on the drive shafts.

  • @rickbarg3980
    @rickbarg3980 Год назад +1

    Same ones I. Orderd

    • @rcfungames
      @rcfungames  Год назад +1

      Awesome!! You won't be disappointed!! 😁

  • @roymann7959
    @roymann7959 8 месяцев назад +1

    Do you think the brass links are worth getting? Or do you think that would be too much weight? I love your vids by the way❤

    • @rcfungames
      @rcfungames  8 месяцев назад +3

      Hi bro, the brass links are okay, but the difference between the weight of the stainless steel and the brass isn't a lot!!
      I have seen quite a few broken brass high clearance links now, I haven't broken any on the trx4m but I have broken on other rigs that I have used brass links!
      The problem with Brass is that once it bends, it just cracks and breaks off the threaded end.
      The stainless steel links will take a lot more before they will break.
      So in my opinion I would go for the stainless steel links.
      Thanks bro, I really appreciate that!
      It's always great to get some feedback on the videos!
      🤜💥🤛

    • @roymann7959
      @roymann7959 8 месяцев назад +1

      @@rcfungames oh okie thank you so much! Will definitely pick up some steel ones instead lol

  • @nathanturska1994
    @nathanturska1994 6 месяцев назад +1

    Can you put longer shocks on without these high clearance links?

    • @rcfungames
      @rcfungames  6 месяцев назад +1

      You can put longer shocks but you probably going to have problems with the angles on your front drive shaft.
      But you should be able to.
      When you do get high clearance links, make sure you get the ones with the plastic ends so you can adjust them with a spacer so you can sit the angle on your drive shaft.

  • @UNDEADGERBIL
    @UNDEADGERBIL 6 месяцев назад +1

    With the angle of the front axle does it hurt the steering with it cated forward a little bit or is it no problem?

    • @rcfungames
      @rcfungames  6 месяцев назад +1

      You barely noticed it, but that's exactly why they have come out with the new adjustable C-Hubs 👍

    • @UNDEADGERBIL
      @UNDEADGERBIL 6 месяцев назад +1

      @@rcfungames ah ok. But isn't the servo angled with the axle so if you adjust the c-hubs wouldn't the steering link be too high to connect?

    • @rcfungames
      @rcfungames  6 месяцев назад +1

      @@UNDEADGERBIL it seems to work perfectly fine, as the ball joints allow for the steering bar to sit with no problem.

  • @rcfungames
    @rcfungames  11 месяцев назад +1

    Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMTk4NDY0MzY3fQ%3D%3D

  • @HoneyToker
    @HoneyToker Год назад +2

    Hey I have a big problem and I don’t know how to fix it right now, thought you could help? My servo keeps hitting the frame rails and it’s preventing me from getting full flex out of my shocks.. thoughts?

    • @rcfungames
      @rcfungames  Год назад +3

      There's definitely issues with the front end once you start getting too much flex there is not much you can do with the way it's set up, I would say give the new INJORA Lay Down Servo Mount With Steering Links a try I am sure that it will give you the clearance you need to get your full flex 💪
      www.injora.com/products/injora-lay-down-servo-mount-with-steering-links-for-1-18-trx4m-stock-length-axles

    • @HoneyToker
      @HoneyToker 11 месяцев назад +2

      @@rcfungames I actually have one in my amazon cart because i thought that might fix it i was also looking into some comp style chassis so the front end had more clearance as well thought that might help too! Thank you so much for your help!

    • @rickbarg3980
      @rickbarg3980 11 месяцев назад

      You could file your servo down

    • @datrain780311
      @datrain780311 10 месяцев назад +2

      ​@@HoneyToker that mount wont work with the stock frame. Youll have to upgrade to the Injora frame because its wider

    • @talldude4394
      @talldude4394 9 месяцев назад +1

      @@HoneyTokerdid the mount help?

  • @rickbarg3980
    @rickbarg3980 11 месяцев назад +1

    How many of theses Bronco and Defender parts are interchangeable,to the K10 I know the drive shafts are different,and the hi clearance links are different,and possibly the transmission unit ,help thanks

    • @rcfungames
      @rcfungames  11 месяцев назад +1

      The transmission is the same as the Bronco and Defender, the only difference between the (Bronco Defender) and the high Trail is the length of the chassis, that means only the drive shafts and links are different.
      Everything else is the same!
      I hope that helps.
      Any doubts on anything I can help with feel free to ask 👍

  • @SinisterDeeds214
    @SinisterDeeds214 Год назад +1

    Do these links work on the Bronco/Defender also?

    • @rcfungames
      @rcfungames  Год назад +2

      Yes you can get a set of these links for the Defender and Bronco
      Here is a link to the right set of links for the Bronco and Defender
      www.injora.com/products/injora-stainless-steel-high-clearance-links-set-for-1-18-trx4m-trx4m-08

    • @SinisterDeeds214
      @SinisterDeeds214 Год назад +1

      @@rcfungames sweet. Thanks!

  • @theboyzfishingco4988
    @theboyzfishingco4988 7 дней назад

    My servo hits the little front brace

    • @rcfungames
      @rcfungames  6 дней назад

      If you are running the lay down Servo setup, put the servo on behind the mount, it will give you the clearance you need.
      If you are still running the upright Servo setup, you will have cut a bit of the bumper mount in the back away to allow for enough clearance.

  • @rickbarg3980
    @rickbarg3980 11 месяцев назад +1

    That’s awusome

    • @rcfungames
      @rcfungames  11 месяцев назад +1

      Thanks buddy, I really appreciate it 👍👍👍

  • @ericbrooks1562
    @ericbrooks1562 4 месяца назад +1

    👍

    • @rcfungames
      @rcfungames  4 месяца назад +1

      @@ericbrooks1562thank you so much for watching and leaving a comment 👊😉

  • @robertsalazar2212
    @robertsalazar2212 Год назад +1

    My servo is hitting the plastic peice tfor the clipless body

    • @rcfungames
      @rcfungames  Год назад +2

      Hello and yes I have also run into this problem! You have to sit and carve away the back side of the bumper Mount until you get enough clearance for your Servo.
      Also if your Servo cable is coming out the front take a little bit of super glue and glue it standing upwards so you pull the cable and the rubber boot out of the way of the mount.
      Hope that helps

    • @robertsalazar2212
      @robertsalazar2212 Год назад +1

      @@rcfungames ah ok thank you bro will do that

  • @Noprepfelons-bz4up
    @Noprepfelons-bz4up Месяц назад +1

    I can’t pop the golden things in 1:52

    • @chrisdean8235
      @chrisdean8235 Месяц назад +1

      Try gently pressuring them in with needle nose pliers.

    • @rcfungames
      @rcfungames  Месяц назад +1

      If you can't pop them in with your fingers, use a pair of pliers to gently push them in.

    • @Noprepfelons-bz4up
      @Noprepfelons-bz4up Месяц назад +1

      @@rcfungames thanks

  • @hehehyhehehe
    @hehehyhehehe 9 месяцев назад +1

    Hey I need some help I’ve been looking everywhere and trying everything but I just put these on not too long ago and they are pushing the rear axle out too far and the drive shaft keeps disconnecting I can’t find the problem. 🫤

    • @rcfungames
      @rcfungames  9 месяцев назад +1

      Sorry for the late reply I have only just found your comment!!
      That's strange!! Are you running upgraded drive shafts?
      If you are are you sure they were both for the high Trail and not for the Bronco and Defender?
      Because they are shorter than the high Trail ones!!
      If you didn't well then they should be no reason for them to fall out!
      Find me on Facebook and share some pictures so I can try and help.
      facebook.com/share/qeaFvPe7GEVUKWLt/

    • @hehehyhehehe
      @hehehyhehehe 9 месяцев назад

      @@rcfungames hey I actually just found the problem and it is what you said they were the high trail version and I just started the return and I have the new parts and they fit perfectly thanks for the help though. I love your channel so much 10/10