can you make a video about airbrush-ing the midsole of the Ultraboost to WHITE again ( after being yellowed after wearing for a long time or BLACK it out ??
General question i have a lot of ultraboost black on canvas and white on plastic would like to paint plastic only to match some workout shorts. Not comfortable with airbrush so was woundering could i use the same paint you use in the beginning with a mixture of 2 hard and then brush on...any concerns will it streak or not stick the same...tia
Question If you start with bright colored shoes and decide to paint them over with black will the paint make it full black or will their be a tint of the color you started out with???
what if the nettig gets dirty ( no shoe protector was put on) when washing will the paint bleed or something im just cutious cause i havent used angelus produces on mesh or netting
I'm actually working on a roshe run. I realize that the angelus white it clearly different from the white fabric and if you put any color on the mesh... there's no going back. you can't remove angelus paint from fabrics. if I'm wrong, please correct me.
Correct. Theres several different shades of white as there are in black or any other color (50 shades of grey lol). I have not found a way to color match it exactly. you would want to "feather" off the part you painted gradually and do it in light coats. Still wont be exact, but wont be as noticable.
How can I clean / take off angelus paints from boost (or even off of primekni)? I have little speckes of angelus flat black paint on my midsole. How can I clean it up.
Holy! This is very helpful. Love all your work! @Suheel @Feelgood Threads Peace from the Philippines :) Hope to get featured on Angelus' Instagram too.. Been doing customs for quite sometime now using Only Angelus Brands!
If the material is fabric then we suggest using 2 Soft. 2 Soft will allow the paint to adhere better to the fabric and will keep it from becoming too stiff.
Javy Medellin it is but you'll have to paint it white with white paint & 2soft, but if the fabric is too dark you may have to do just white paint, but that may leave the fabric harder then before. No way to flip back to the original white color and texture exactly.
the instructions on their says 300 degrees for 3 - 5 minutes. unless you can get it to that temp safely, id recommend a heat gun. doesnt have to be a fancy one...
Yes when you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials. It is a simple process. Check out the 2-soft here angelusdirect.com/products/angelus-2-soft-fabric-medium If you have any more questions feel free to contact us at Info@angelusdirect.com thank you -Angelus Direct
@@AngelusBrand I've used acetone twice on Ultraboost and never had a problem, but I get it to each their own. What about your brand of deglazer? Or an adhesion promoter? And like you said you can light sand also. The paint job he did is excellent work and it looks great! Im just stressing how long it will hold up?
Hey Michael, Yes when you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials. - Mix Angelus 2-Soft with Angelus Acrylic Paints in a 1:1 ratio. - Apply multiple coats until you obtain full and even coverage. - Allow paint to completely dry. - Heat-set using a heatgun at 300º F for 3-5 minutes (this step is REQUIRED). If you have any more questions feel free to contact us at Info@angelusshoepolish.com
We use Grex brand airbrush for all our customs. If you have any more questions feel free to contact us at Info@angelusdirect.com thank you -Angelus Direct
The paint may not stay and last on the respective materials. Since Angelus Paints are made for leather the additives will help the paint to adhere to different types of surfaces.
ranithemonster303 2thin or 2soft would both just water down the paint so it seeps in the fabric easier and covers more fully on the parts that are hard to reach.
With proper preparation, thin layers and proper dry times you should be able to treat your customs and wash them like any normal shoe. . Watch this video to learn more: ruclips.net/video/qGY82LOkAls/видео.html
4:48 - To be honest the paint looks really dull as it seeps into the fabric! It almost seems dead to be honest or what it should look like when it's near it's expiration date. Nonetheless pretty good craftsmanship.
Which product are you looking for? Here's a link to all of our distributors and let us know if you have any questions. angelusshoepolish.com/pages/where-to-buy
suheel you're mad talented bro. keep up the good work
appreciate you bro!
These would look even cooler with a blacked out boost.
Colonello I just didn't have time
Angelus is the best leather paint brand ever
can you do another ultraboost custom? start with the triple white 3.0 and paint it like the miami hurricane colorway?
I would really like one guide like this with a pair of NMDs, with paint and all.
You Always do Great Work Bro!!
those are fire🔥🔥🔥
I'm addicted to watching customs
can you make a video about airbrush-ing the midsole of the Ultraboost to WHITE again ( after being yellowed after wearing for a long time or BLACK it out ??
General question i have a lot of ultraboost black on canvas and white on plastic would like to paint plastic only to match some workout shorts. Not comfortable with airbrush so was woundering could i use the same paint you use in the beginning with a mixture of 2 hard and then brush on...any concerns will it streak or not stick the same...tia
The Bob Ross of shoes ?
Do an nmd custom
Jordi Ettinghausen a*
Owen J it's actually an*
Can you make a video on how to use an airbrush when you get it? For beginners
I would love to, already voiced that to the Angelus Team, hoping soon!
Question If you start with bright colored shoes and decide to paint them over with black will the paint make it full black or will their be a tint of the color you started out with???
Shnibble Tron black is amazing to cover. With a few coats you won't even see re color underneath.
If you want to use Angelus paint markers on mesh, would you combine the paint with 2-thin or 2-soft?
Correct. You may not need as much 2-Thin. It will be something you need to test and experiment with as you go.
what if the nettig gets dirty ( no shoe protector was put on) when washing will the paint bleed or something im just cutious cause i havent used angelus produces on mesh or netting
would it turn out not so great if I dont use 2 - hard or 2 - soft on different materials ?
Can you do a supreme custom on any pair??? Seems like a nice vid
We actually are working on one on our channel Feelgood Threads. Should be out next week!
If I wanted something like that but a desert camo what colors should I use?
Any difference between GAC 900 and 2 soft ?
Angelus 2-soft is our Very own fabric medium.
They can be call koi fish boost great work men
I'm actually working on a roshe run. I realize that the angelus white it clearly different from the white fabric and if you put any color on the mesh... there's no going back. you can't remove angelus paint from fabrics. if I'm wrong, please correct me.
Correct. Theres several different shades of white as there are in black or any other color (50 shades of grey lol). I have not found a way to color match it exactly. you would want to "feather" off the part you painted gradually and do it in light coats. Still wont be exact, but wont be as noticable.
Looks good with the tape on. Lol.
0:39 that are those on the side?! :D
Should i put finisher on the cage ?
K Helm yes
How can I clean / take off angelus paints from boost (or even off of primekni)? I have little speckes of angelus flat black paint on my midsole. How can I clean it up.
Zakir Daya use a qtip and preparer & deglazer
Feelgood Threads You don’t have to prep primeknit with the deglazer?
Hey what paint do I need to paint my Ultraboost 4.0 Grey heel cup to Black? Looking for a matte/flat finish.
Go ahead and use our Flat Black with a drop of Duller. This will give a real nice matte look.
Holy! This is very helpful. Love all your work!
@Suheel @Feelgood Threads Peace from the Philippines :)
Hope to get featured on Angelus' Instagram too.. Been doing customs for quite sometime now using Only Angelus Brands!
Jon D.G. Appreciate it so much.
Do you have to use a finisher when painting on a material like this?
Nope, finisher is optional. It adds a little extra protection but mostly gives the project a nice sheen.
next can u do the Chris Paul Jordan 11 player exclusive
Mike Howard comin next week on my channel bro
wats ur channel
When do I use 2 soft as opposed to using just water? I want to customize Prestos as well as my air max zeros
If the material is fabric then we suggest using 2 Soft. 2 Soft will allow the paint to adhere better to the fabric and will keep it from becoming too stiff.
Hey I'm wondering if painting the adidas ultra boost back to white is possible?
Javy Medellin it is but you'll have to paint it white with white paint & 2soft, but if the fabric is too dark you may have to do just white paint, but that may leave the fabric harder then before. No way to flip back to the original white color and texture exactly.
Do more jordan 11 customs!
Weve got one coming up on our channel Feelgood Threads, should be up in a few weeks!
Can you guys do ON feet at the end of the videos?
Can you do this for my pair how much would you charge ?
mr_itryhard info@shopfeelgood.com for a quote.
custom Nike foamposites
do you need a heatgun if doing it on vans
Moses Khawng yes
yall should sell those in sets... like the galaxy 1
sparkle glitter on a pair of af1
this would look good without the camo and leave the black and paint the boost black tht would look nice
@Angelus Shoe Polish what the music playing at 4:08, I deserve to know because I'am an avid customer. :D
Nice. how did u get the black smudges off the midsole..
i used some angelus deglazer with a qtip and gently wiped it off
Thanks I'm purchasing some next week..
Do you know of a good outlets in uk
wher can i get this type of kit i want to start custimising my on shoes
do you need to heat set with a heat gun? any alternatives?
the instructions on their says 300 degrees for 3 - 5 minutes. unless you can get it to that temp safely, id recommend a heat gun. doesnt have to be a fancy one...
thank you!
A few years ago, shoes were things that you wore on your feet. Now they are something like your pet?
You paint your pet do you?
Can you paint over a dark prime knit ultraboost?
Yes when you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials. It is a simple process. Check out the 2-soft here angelusdirect.com/products/angelus-2-soft-fabric-medium If you have any more questions feel free to contact us at Info@angelusdirect.com thank you -Angelus Direct
please do a custom for kobe mambas
will the paint comes off if I wash them ?
puah zhi jian nope
Dang you didnt wipe acetone on the plastic first? 2 hard is cool but definitely thats not going to stick
He used the 2-Hard for this application. Acetone can ruin these types of materials easily. You can also light sand as well prior to painting.
@@AngelusBrand I've used acetone twice on Ultraboost and never had a problem, but I get it to each their own. What about your brand of deglazer? Or an adhesion promoter? And like you said you can light sand also. The paint job he did is excellent work and it looks great! Im just stressing how long it will hold up?
Solider 10 custom
Does the paint bleed if water gets onto it?
Nope, as long as the shoe is prepped properly and the paints are applied correctly then the paint will not come off or bleed.
Can I buy?
Do you need to heat set any of the paint you are putting on on the fabric? Or will letting it dry naturally do the trick?
Thanks
Hey Michael, Yes when you are working with that Fabric material you can mix our paint with our Angelus 2-soft fabric medium. Mixing the 2 will help the paint adhere on that type of fabric materials.
- Mix Angelus 2-Soft with Angelus Acrylic Paints in a 1:1 ratio.
- Apply multiple coats until you obtain full and even coverage.
- Allow paint to completely dry.
- Heat-set using a heatgun at 300º F for 3-5 minutes (this step is REQUIRED).
If you have any more questions feel free to contact us at Info@angelusshoepolish.com
Thanks for the response!
what type of airbrush are you using?
We use Grex brand airbrush for all our customs. If you have any more questions feel free to contact us at Info@angelusdirect.com thank you -Angelus Direct
sick koifish camo
can you custom a yeezy 350 v2? would be nice
+Angelus Brand (Angelus Shoe Polish) only have one
fear of gods collab with vans
can i anyone tell me what kind of tape did he use ? where to buy them ?
This is our red vinyl tape. It is stocked and ready to order at anytime. www.angelusdirect.com
what will happen if i don't use angelus 2 hard and 2 soft
The paint may not stay and last on the respective materials. Since Angelus Paints are made for leather the additives will help the paint to adhere to different types of surfaces.
I thought his name was Shoe heel hahaha
what type / brand r those paints ?
These are the Angelus Brand.
eqt custom on ultra boost
That shoe would look amazing with a leather cage? Right
Jordan 23 custom
how can I restore the ultra boost logo
No gac 900 on the fabric??
I'm pretty sure the 2-soft is angelus's version of gac900
Still No Glitterlites ?
I believe @sneakerkraft has a video on glitterlites. you should check out her channel!
why did he put 2 thin if he didnt use air brush?
ranithemonster303 2thin or 2soft would both just water down the paint so it seeps in the fabric easier and covers more fully on the parts that are hard to reach.
What happenes when washed?
With proper preparation, thin layers and proper dry times you should be able to treat your customs and wash them like any normal shoe. . Watch this video to learn more: ruclips.net/video/qGY82LOkAls/видео.html
I'm the 1000 liked person
4:48 - To be honest the paint looks really dull as it seeps into the fabric! It almost seems dead to be honest or what it should look like when it's near it's expiration date. Nonetheless pretty good craftsmanship.
all sold out on website bruh
Which product are you looking for? Here's a link to all of our distributors and let us know if you have any questions. angelusshoepolish.com/pages/where-to-buy
Koi Fish - Feng Shui shoe
my Angelus paint seems to keep coming off the plastic. I tried using the Gardner with the paint and still no luck. do u know what I am doing wrong...
But if youre using the gardner, who the heck is mowing your lawn???
Feelgood Threads I meant to put the hardner with the paint...lol. have an answer?
this would match perfectly with fouseytubes bmw...
I wish I could pay for someone to do this for me because I suck with paint.
Thanks Angelus brand!
RainGaming32 1 me to
Do You Customize Shoes For Subs?
Okay Thanks!
CUSTOM SKATE HI VANS PLEASEEE😭🙏
check out my angelus direct unboxing
Customize some cream yeezys
TYLER Johnson i am now.
Looks also like a koi fish
1k likes I did it
100
First !!!!
can i send my shoes in and pay for you to do this shit?
P Y Z I U M yes. Contact us info@shopfeelgood.com
wouldnt waste good paint on such ugly shoes
Denver January on feet they look dope,they are also the most comfortable shoe you will ever wear
why waste good time on an opinion that doesn't matter?
yall should sell those in sets... like the galaxy 1
Is it possible to remove paint from primeknit material?
After doing a custom
thanks
how long does the paint last
should be on there permanently