This thing is $1600 right now. I remember being $900 just last year. Don’t tell me they had to increase the price almost 100% due to inflation. Companies like this are garbage
I don’t know the specifics of this company, but I do know of another overland product company that took on a new investor, bought a lot of very expensive equipment and raised their prices.
It's only 70 lbs, and relocates my tire and gives me modular options moving forward. Originally, I looked at high priced, and heavy alternatives, but this is my clear choice.
I just can’t see this system not completely vibrating itself to death after time and constantly needing adjustment. The leverage on that 2” receiver is crazy. The concept is really cool though. Easy install.
1 - I sure hope no one got bit by that hissing snake :D 2 - Back when I was 18, my 4Runner used to shake like that all the time side to side :D I'm 46 now and I'd rather watch 4Runner/camping/overlanding videos on YT - it's cheaper in the long run and you get to keep more of your stuff. 3 - I have one of these for my 1999 Lexus LX470 - very stout, but I wish mine "tucked" in a couple inches closer to the bumper. 4 - Install is easy until you start wiring for the license plate re locate. I ended up cutting my aux. trailer plug and locating the hot/ground by trial and error for the lights.(could not locate a pin diagram) I ordered the ones on Amazon rec. by RIGD. Keep in mind this is a diff. vehicle than the new 4Runner they used in their install video. I did not want to tap into my rear tail lights because I have a tail gate and didn't want those wires in the way. Overall, my version is pretty clean, you don't really see the wires since I used the snake skin sheathing for my wires.
Thank you for sharing! We didn’t do the relocation cuz the new owner may not keep this on or what not permanently. Your exes sounds so clean! Love those old 470’s
Nice rig. I love the concept of ultra swing. I just wish the tire angle was flush and not sticking out / straight. JMO. Great content as always. Thanks.
Good Review. I am going to save up for one of these as well as a spare tire, or I should say, pay off my CC to charge it back up. Needs a License Plate Holder. I don't think the Law likes it that the tire blocks the License Plate. Curt makes a Tow Hitch license plate holder. Could go on the bottom "hitch" a bike rack on the top hitch. 👍
Rigd supplies a lighted license plate holder with the kit that mounts to the rack and plugs into your 4 pin so that the lights work when needed at night.
There was a smidge of a pause between the rear can open and clear. Lol. Looking great John. Love the look - you putting exhaust on it and getting it tuned? :)
Wow she looks so good and drives so smooth. It’s my dream car and how I picture it made into reality without a doubt! Really hoping I can be the lucky winner of Black Magic 🪄 She would make my world complete 😍🤤
Just entered the giveaway my birthday is this month so i hope i can win as a birthday present to myself i want to get into offroading and hope to have this as a starting platform you make great videos for how tos and things
@@TRDJon thank you i always watch your videos its cool to see the upgrades you can do to a fifth gen been looking for one but ill be very happy if there is a possibility i can win this beast of a 4runner
$1,250 plus tax and shipping is no small purchase. Out of box reviews are worthless And only serve the manufacturer. I'd like to see a 2-5 year product review to see how it holds up. ( wobble, noise, God forbid reciever fracture) I'm looking for one but have a mortgage and Before I spend this kind of cash for tire Carrier,I want to see a long term product review for I pull the trigger
The website says that it wont fit in the v8 runners due to the hitch being lower than the other models. Do you agree? How many cylinders is this runner?
My thought exactly. It's out there! Looks like you could just cut it down and re-insert the wedge tension system. Might have to drill a new pin insert though
Is there any way to get the carrier a little closer to the bumper? Was there still one more hole you could have aligned to? It seemed like the carrier was sticking out of the hit about 3” - thanks great vid
WOW.. PRICEY!! Hell for that kinda money worth going with a full blown bumper setup. Was hoping being half the product it would come in at half the price.
@@TRDJon Ah ok thanks, another question is there a difference between the universal and the 4runner version other than the latch location, is one higher than the other or anything
Very true. The only downside would be that a homemade one would send you to jail if it was to fail while towing. From their website, it's officially rated at 10k lbs I believe, assuming the liability for you in case of accidents. The traffic police would have a ball here with you if they pulled you over while towing a trailer with no official weight capacity stamped on it.
This thing is $1600 right now. I remember being $900 just last year. Don’t tell me they had to increase the price almost 100% due to inflation. Companies like this are garbage
Yeah at that point just put in an extra 1k and get a high clearance bumper.
I don’t know the specifics of this company, but I do know of another overland product company that took on a new investor, bought a lot of very expensive equipment and raised their prices.
Mannn! That rig is looking so good! Your doing an incredible job with it! Everytime I see that thumbnail with the rig, I get goosebumps 😍
Thank you!!!
Made in USA. Sold, definitely on my wishlist!
For sure!!!
It's only 70 lbs, and relocates my tire and gives me modular options moving forward. Originally, I looked at high priced, and heavy alternatives, but this is my clear choice.
I just can’t see this system not completely vibrating itself to death after time and constantly needing adjustment. The leverage on that 2” receiver is crazy. The concept is really cool though. Easy install.
Thanks man, I was always wondering why they don't utilize the tow hitch as a spare carrier. Now someone made it.
There’s a better one than this one, from dirtcom I received mine yesterday a wow even has a lock for the swing out to avoid to hit the car
Could you put another ultra swing behind the ultra swing?
LOL
Yes!
And you can add one to that one
that is not only Rock Solid but designed amazingly well 👌
Yes sir it is!! Very well thought out too!
OMG this 4runner is looking so good now...
Night and day difference from when we picked it up
1 - I sure hope no one got bit by that hissing snake :D
2 - Back when I was 18, my 4Runner used to shake like that all the time side to side :D I'm 46 now and I'd rather watch 4Runner/camping/overlanding videos on YT - it's cheaper in the long run and you get to keep more of your stuff.
3 - I have one of these for my 1999 Lexus LX470 - very stout, but I wish mine "tucked" in a couple inches closer to the bumper.
4 - Install is easy until you start wiring for the license plate re locate. I ended up cutting my aux. trailer plug and locating the hot/ground by trial and error for the lights.(could not locate a pin diagram) I ordered the ones on Amazon rec. by RIGD. Keep in mind this is a diff. vehicle than the new 4Runner they used in their install video. I did not want to tap into my rear tail lights because I have a tail gate and didn't want those wires in the way. Overall, my version is pretty clean, you don't really see the wires since I used the snake skin sheathing for my wires.
Thank you for sharing! We didn’t do the relocation cuz the new owner may not keep this on or what not permanently. Your exes sounds so clean! Love those old 470’s
Nice rig. I love the concept of ultra swing. I just wish the tire angle was flush and not sticking out / straight. JMO. Great content as always. Thanks.
Tons of options on the market though! So hopefully one matches those needs. Thanks!!! I appreciate the support!
For 1800 you better be able to drive that tire mount
I love this system. What I don’t like are some of the products you can buy; I should say the cost. Ie- the bicycle rack extension, $100.
That is a sweet mod. Where do you put the license plate to stay legal though?
I got one when they had there big Black Friday sale with the Frontrunner table. I’ll test out in Big Bend National Park next month! 😀
Awesome stuff! I hope you like it!
Good Review. I am going to save up for one of these as well as a spare tire, or I should say, pay off my CC to charge it back up. Needs a License Plate Holder. I don't think the Law likes it that the tire blocks the License Plate. Curt makes a Tow Hitch license plate holder. Could go on the bottom "hitch" a bike rack on the top hitch. 👍
Rigd supplies a lighted license plate holder with the kit that mounts to the rack and plugs into your 4 pin so that the lights work when needed at night.
I've been eyeballing these for a hot minute for my Runner.
Pricey but they quality is top notch! I wish we showed how it was packaged too
@@Atlanta_Cyclist Did you did you do a camera relocation as well?
Like the concept and your vid. According to RIGD install video you missed the recommended torque and tire mount screws were put on backwards.
Love it! Keeps the body lines clean!
For sure does!
You have to relocate the rear camera and that means running a wiring harness to the head unit.
No there are different kits for it,
There was a smidge of a pause between the rear can open and clear. Lol.
Looking great John. Love the look - you putting exhaust on it and getting it tuned? :)
lol I had trust!!! Hahaha I would if it was mine to keep!!!
Wow she looks so good and drives so smooth. It’s my dream car and how I picture it made into reality without a doubt! Really hoping I can be the lucky winner of Black Magic 🪄 She would make my world complete 😍🤤
Time is ticking down to find out who the winner is!!!! We appreciate your support bro!!
Ordered mine over holidays. It comes Monday! 😋
Nice!! Super super easy install!
It looks great where did you buy it I have a 4runner that I want to put one on
I am interested but I have a jeep gladiator, how well I order
It does look Great!
license tag and tag light mount?
Looks awesome! Does it fit GMC Acadia Denali 2012?
Who want that high rev driving 4runner? Remember someone will won this 4runner spend hard worker money fixing whats broken. 🇺🇸🇺🇸🇺🇸
I hate how far out the back the tire sits.
Thank for show!!! I plan to order!!!
First and foremost it looks awesome. Second, will this install no problem in my 2021 4Runner ? Thanks 🙏
Hmmm, was looking at Wilco. Now you got me flipping.
Definitely like this one from the ease of install and the no wobble
With a spare tire on, does this interfere with a 2022+ Toyota Tundra backup camera?
I would like one for my 4Runner but cops in my town are gonna get pissed off when they can’t see my plates.
I really really liked it back then. Now I'm in love 😍 Gosh I really hope I win it!!!
Best of luck and thanks for the support man!!!
@@TRDJon thank you Brother!
Always!
Sigh ... I missed this. Darn.
Hi, nice gear👍 , but about the license plate, not problem with the police... the license are blocked??
There is a relocation kit we did not install
Beautiful stuff but damn $1300??
A mod to save up for for sure
does it fit for subaru outback wilderness 2024?
man that thing sticks out far. Is that the version made 4Runner or the Universal fit? I've heard the hitch on the V8 causes it stick out far.
It’s universal but we pushed it in more after the video.
@@TRDJon right on! Happy to hear it can get closer to the bumper.
Yea we didn’t notice it at first when we made the video. Appreciate it!
Just entered the giveaway my birthday is this month so i hope i can win as a birthday present to myself i want to get into offroading and hope to have this as a starting platform you make great videos for how tos and things
Happy birthday!! We appreciate the support and best of luck!!
@@TRDJon thank you i always watch your videos its cool to see the upgrades you can do to a fifth gen been looking for one but ill be very happy if there is a possibility i can win this beast of a 4runner
Hell yes. I did it!!
What’s that???
@@TRDJon sorry. Dig it. Lol
I got you man!!
what is the price and shipping cost to Sydney Australia? will it fit LC200 VX 2021?
Awesome 4Runner
Appreciate it man!!
Would it fit a 2004 honda Element?
This is a universal one
Will the back ladder interfere with the spare tire set up?
This won’t swing to the left hand for the GX right?
That is a sick spare arm!
for sure is!
I live in Dubai and want to know how I can order it ? I don’t mind the shipping
cost. I have a 2006 suburban
Your making me spend 💰 lol. I'm going look into one of these for my Tacoma.
were you in batman and robin forever?
how much does the mount weight, not including wheel and tire?
Do you know if that works in a odyssey 2011
Did you ever install that dash cam for the 4 runner? I’ve been looking around.
No I’m about to get the dongle that going into your rear view camera and pick one up. What brand you looking at?
@@TRDJon I’ve been leaning towards VAVA. How about you?
Been looking at blackvue and there was another but can’t remember the name. I want one that shines both forward and back
That looks very stout!
Looks good
Thanks man! Appreciate that
I literally would have died to win this 😮
Tuff!!!!!🔥🔥🔥
For sure is! Amazing quality
Haven't seen anyone actually towing anything with one of these. Would love to know anyone's experience towing a flats boat or smaller trailer.
will this fit on a gx460?
That’s ok I don’t have a garage so don’t worry 😉
Lol haha then you can for sure leave it on if you are the lucky one!!
$1,250 plus tax and shipping is no small purchase. Out of box reviews are worthless And only serve the manufacturer.
I'd like to see a 2-5 year product review to see how it holds up. ( wobble, noise, God forbid reciever fracture)
I'm looking for one but have a mortgage and Before I spend this kind of cash for tire Carrier,I want to see a long term product review for I pull the trigger
Does anyone have experience pulling an overland style trailer wit this mount?
They should have made it swing out the other way. With a higher load capacity.
Nice.
We appreciate it!!
love it!
Thanks!! It’s a killer set up.
The website says that it wont fit in the v8 runners due to the hitch being lower than the other models. Do you agree? How many cylinders is this runner?
This is a V8
LE FALTA SEGURIDAD AL ACCESORIO. SE LO PODRIAN ROBAR FACILMENTE
NICE!! can it be installed any closer?
My thought exactly. It's out there! Looks like you could just cut it down and re-insert the wedge tension system. Might have to drill a new pin insert though
How come the lever is on the outside it suppose to be on the inside for the 4runner
Universal rack
The lever to release the swing is on the out side...is it the early model ultra swing is on the inside or you can swap side
Is there any way to get the carrier a little closer to the bumper? Was there still one more hole you could have aligned to? It seemed like the carrier was sticking out of the hit about 3” - thanks great vid
Yes you can. Multiple pin spots
Can someone help me Where I can get this in Canada Toronto
Looked like it wobbled at 3:13
Sits too far from tailgate
2020 honda pilot awd can fit?
what a start :)
Heck yes!!!
What about the rear license plate location?
They make a bracket for it. We didn't install in this video/
WOW.. PRICEY!! Hell for that kinda money worth going with a full blown bumper setup. Was hoping being half the product it would come in at half the price.
Man I wish I could win this! Never know LOL
You never know man! Best of luck!
Why not the Ultraswing 4runner model? There is a model build specifically for the 4Runner.
Just what we/rigid wanted to promote.
Because that version is stated to not fit the V8 4th gen with the higher rated tow hitch.
@@Seattle808 I see. I'm assuming the same applies to the GX470. Thanks.
Jon will this work on the 2022 tundra? Thanks
It’s a universal so it should
Where can I order one of those, for my Toyota 4runner 4th and how much is it?
Links in the description
how come this ultraswing for the 4runner have the bike handle outside and the one at RIGd its inside ?
This is a universal one
@@TRDJon Ah ok thanks, another question is there a difference between the universal and the 4runner version other than the latch location, is one higher than the other or anything
Will this fit on my 2005 V8 4runner? Website says no but looks like it fits fine on yours ?? Anyone know
It will if you are looking at the universal one
I would get it but I live in the hood lol
1.3k for that thing holy crap...
will this work on a second gen?
Yes
Love them, but will never have being so overpriced 😢
Does it affect the backup camera?
depends on where your camera lis located.
What happens with back up cam?
They have relocation mods depending on your vehicle
$1500. Seems steep.
Extremely steep, however having a signed off engineering design approved for towing must not be cheap...
Great system but 1,600 is wildly overpriced. A good fabricator can make one for 5-600 bucks
Very true. The only downside would be that a homemade one would send you to jail if it was to fail while towing. From their website, it's officially rated at 10k lbs I believe, assuming the liability for you in case of accidents. The traffic police would have a ball here with you if they pulled you over while towing a trailer with no official weight capacity stamped on it.
Wish it didn't stick out so far
You should have put some grease on it before installing …
We did.
Oh I’m winning this bad boy. I bought like 40 hoodies
Ps. My loooord the v8 sounds good
Sounds soooooo good. BEST OF LUCK!!!!!!! We appreciate the support!
How to win this vehicle?
Check the link in the description
😎👍👍👍
will this fit gx470?
Yes
Just be careful for how your back gate opens
Why? They make a sweet rear tire mount for your rear door/trunk.
It looks soooo good!!!
Not only looks but performance too
@@TRDJon yeah that v8 sounded mean!
$1600 and probably $2100 with shipping 🤦♂️