Building a 1500 hp Hellcat Engine | Short Block Assembly

Поделиться
HTML-код
  • Опубликовано: 13 янв 2025

Комментарии • 75

  • @autoaddiction910
    @autoaddiction910 Год назад +8

    your videos make me feel like I could build my LSA motor and have that confidence lol. I'm on my second time watching.

  • @alexjuarez1247
    @alexjuarez1247 Год назад +4

    Hell yes more vids like this 🫶💯

  • @tgtshirts1
    @tgtshirts1 Год назад +2

    I am going to have to watch this video a few more time ! Well done !!!
    Thumbs up !

  • @davesperformance88
    @davesperformance88 Год назад +1

    Hopefully when you measured you put an extra .005 on the rods and bearings for being a performance build.

  • @teamtimebombmotorsports1092
    @teamtimebombmotorsports1092 Год назад +2

    If that's a stroker setup, double check that the oil squirter will work. The squirter's are usually removed and blocked off.

    • @boostedmotorsports2
      @boostedmotorsports2  Год назад +2

      This one is just a stock crank 6.2 we’ll be showing a 426 stroker next on the channel

    • @teamtimebombmotorsports1092
      @teamtimebombmotorsports1092 Год назад +1

      @@boostedmotorsports2 I look forward to seeing the build. Nice work.

  • @jeremygarcia1715
    @jeremygarcia1715 Месяц назад

    This video helped a ton as well as a lot of your other Hemi Videos rebuilding my own Eagle Hemi with a Chopacabra cam can’t wait to turn it over thanks a ton for the help.

  • @Kilnor
    @Kilnor Год назад +1

    She's gonna be a beast! Loving this build.

  • @bobp7626
    @bobp7626 Год назад +2

    Straight forward!

  • @MM_in_Havasu
    @MM_in_Havasu Год назад +1

    Badass! This build has all the good stuff in it! Thanks for a detailed update!

  • @bdogjr7779
    @bdogjr7779 Год назад +2

    LIKE 7👍🏾😎🤳

  • @bdogjr7779
    @bdogjr7779 Год назад +4

    PrimeTime👍🏾😁🏈

  • @patrickciarcia4100
    @patrickciarcia4100 Год назад

    I just love this build… I’m so excited for you..👍🏻👍🏻👍🏻😎.. Pat

  • @winstonemerson2439
    @winstonemerson2439 Год назад

    Great video
    Very precise operation Dr.Boosted!

  • @Tyler_Andrew
    @Tyler_Andrew Год назад +2

    Love watching the content, I don't know much about building engines but this is sure entertaining! Keep it up

  • @ewallacestudent1
    @ewallacestudent1 Год назад

    I'm liking the way you explain. Thanks

  • @richardgarris9305
    @richardgarris9305 Год назад +1

    💪🏽💪🏽💪🏽. That red ultra slick lube is all I use.

  • @johnsmith-qz4bv
    @johnsmith-qz4bv Год назад +1

    Awesome build this car is going to be a lot of fun.. great work 👍😊

  • @masonmiller2697
    @masonmiller2697 Год назад +1

    I seen where you said there is a film of oil on the lifters, plus your assembly lube. My last engine I let them soak in oil beforehand. I was worried about the needle bearings on the roller. Its how I was taught. I feel like it might be old school, but did you presoak them or just mineral oil from facotry?

  • @chrisd2486
    @chrisd2486 11 месяцев назад

    Awesome video I love such detailed stuff

  • @JIMFED63
    @JIMFED63 Год назад +1

    Epic build John, can’t wait to see the dyno numbers !

  • @sneezinhatch
    @sneezinhatch Год назад

    I cheaper out and had Steve Morris build me a gen 3 hemi low compression boosted cam and a single 103mm turbo

  • @dtruth5769
    @dtruth5769 Год назад +1

    LOOKS AWESOME! BUT I USUAL PAINT BLOCK A COLOR SO ITS EZ TO SEE FLUIDS

  • @sparkman6713
    @sparkman6713 Год назад +1

    Damn very detailed assembly ! 🙌🏻. Great job bro 💪🏻🔥🏁🏁

  • @wintonwright4244
    @wintonwright4244 Год назад

    You also wipe the bars out with WD-40 in a clean white cloth actually paper towel so you can see that there's always going to be a little bit of dirt and skunk in there

  • @LowKeyKoqui
    @LowKeyKoqui 11 месяцев назад +1

    Such a dope build do you still have the viper as well

  • @mac2708
    @mac2708 Год назад

    "I wanna go fast..." - Ricky Bobby 🏁 #ifyouaintfirstyourelast #hellcat #srt #mopar #moparornocar #challenger

  • @jessehatcher2767
    @jessehatcher2767 24 дня назад

    Is that the BGE stock crank?

  • @xomlee3615
    @xomlee3615 Месяц назад

    Lubing the rod bolts tho??

  • @omarparra3468
    @omarparra3468 Год назад

    Good job 👍

  • @Mike-p2e
    @Mike-p2e Год назад

    Very useful knowledge

  • @jeffc5171
    @jeffc5171 8 месяцев назад

    It would be cool to hear cost of build during the build, there are so many options available. ,

  • @Se7enmax9
    @Se7enmax9 2 месяца назад

    Need this in a tacoma

  • @wkjeeping9053
    @wkjeeping9053 Год назад +2

    I've always heard that changing to arp bolts or studs, you have to have line boring done for the crank bearing are round?

    • @boostedmotorsports2
      @boostedmotorsports2  Год назад +1

      Correct. This new machined block came from MMX with ARP mains and they line bore it out. It’s an option when ordering.

    • @wkjeeping9053
      @wkjeeping9053 Год назад

      Thats cool

  • @GHOST-666-LA-CA
    @GHOST-666-LA-CA 4 месяца назад

    What hp can you actually push the motor to?
    And do you have a parts list you can share? I’m ready to buy and build.

  • @CarsandJiujitsu
    @CarsandJiujitsu Год назад

    Could you tell me what is the name of the song you use in your transitions ? You use it in most videos including this one. Thanks 🙏🏻

  • @ZROSTARS
    @ZROSTARS Год назад

    With that much power are you making it a widebody

  • @trouble30906
    @trouble30906 9 месяцев назад

    I’m in the middle of the same build but I got a question did you do the main studs because my hellcat has bolts..I wanted to stud my mains but wasn’t sure I would need to line home it and didn’t want to get into stripping it all the way down.I’m doing the same drop in piston setup you have also..mmx got me setup also

    • @boostedmotorsports2
      @boostedmotorsports2  6 месяцев назад

      Yes this one has ARP main studs and has been line honed. You definitely want to get it honed if installing ARP mains

  • @Tirah5
    @Tirah5 4 месяца назад +1

    You need a cameraman

  • @sojer6mile
    @sojer6mile Год назад

    Will you be in Tx2k with your hellram?

  • @SrtHemiPower
    @SrtHemiPower 4 месяца назад

    Molnar rods 1500hp 🥶🥶🥶

  • @rickricky8211
    @rickricky8211 Год назад +1

    FYI, there's no need to locate the ring gaps on the pistons. When the engine is running the rings aren't stationary, they rotate on the pistons.

  • @jus.thusi_dj425
    @jus.thusi_dj425 8 месяцев назад

    The undefeated charger 😂

  • @jonphinney4065
    @jonphinney4065 Год назад

    Are you using the factory oil pump? Or are you gonna be using a HVFP?

  • @JigSawFrags
    @JigSawFrags 3 месяца назад

    Lmao it’s all about physics at this point. Better hook

  • @jacksonwalton7404
    @jacksonwalton7404 6 месяцев назад +1

    Way too tight on main bearing clearance for my opinion. I’d at least want another .001 in them

  • @celshock6628
    @celshock6628 9 месяцев назад +1

    Factory bearings? That’s too tight for race bearings.

  • @ryanprettyman3123
    @ryanprettyman3123 Год назад

    Main studs without line honing💪

    • @boostedmotorsports2
      @boostedmotorsports2  Год назад +4

      Nice try. It’s lined honed from MMX wise guy

    • @ryanprettyman3123
      @ryanprettyman3123 Год назад

      You lined honed before drop-ins and plasti- gauged the engine🤣🤣💪💪

  • @jeansonnea
    @jeansonnea Год назад +1

    I almost put in a missing person report.

  • @sojer6mile
    @sojer6mile Год назад

    Listing to just the audio lmao

  • @moparmadness8237
    @moparmadness8237 Год назад

    This mf a bad dude 🔥🔥

  • @wintonwright4244
    @wintonwright4244 Год назад +3

    What is wrong with you man you don't use assembly Lube on pistons and rings you use WD-40 that's even what the manufacturer recommends for those rings

    • @resdawgs
      @resdawgs Год назад +1

      Hahahahaha he said wd40.

  • @TENNESSEETRACKHAWK
    @TENNESSEETRACKHAWK 3 месяца назад

    We deal in WHP bro not BHP..... sounds gay