I have the same diffuser on mine have to put screws one on each side and just so you know don't put the screws at the bottom have to use bolts if not the air and water will rip the screws right out been there done it.
You should black out the crome and add wide wheels & black rims and add fender flares and paint match them with black screws but leave the Nissan logos Crome :)
Clean maxima I was gonna do something to mine but I already has 219,800 miles on it. So it’s time to get something else I was thing about a 5.0 mustang
Question, did you just manually screw through the diffuser and through the car? I’ve had my diffuser for a while and the first time I put it on it I didn’t use screws and it fell off I’m planning to do it soon but I’m nervous about putting in the screws. You didn’t have to pre drill holes or anything you were able to just use a screw driver to get through both?
Yeah I used a screw driver just screwed through the diffuser and bumper. No pre drilling. Just a little bit of force and your good. Just make sure the diffuser is centered
Hopefully you are going to debadge the back. That should have been the first thing you did. What about some rivets on the corners? Either the regular plastic clip kind (like the clips that hold all the black plastic panels on the car) or actual metal rivets.
There easy to take apart you can paint the insides what ever color you want buy the DRLs on Amazon do it yourself for cheaper.just pull the screws out put it in your oven at 240 degrees for 20 minutes and use a pudy knife and the lens will come right off easy.
So we finally put on the rear diffuser!! Link to it in the description. Comment how you think it looks 👀
I have the same diffuser on mine have to put screws one on each side and just so you know don't put the screws at the bottom have to use bolts if not the air and water will rip the screws right out been there done it.
@@jerrywilcox9890 oh dam. Thanks for sharing that. I’ll make the change so it won’t fly off
Bro that rear defused damn there completes it. Cars dope straight up!
Thanks bro. Appreciate it
You have a video on the install for those headlights? Trying to figure out how to get that led strip to come on
I do. Take a look at my older videos
You should black out the crome and add wide wheels & black rims and add fender flares and paint match them with black screws but leave the Nissan logos Crome :)
Clean maxima 👌🏽
Thank you 🙏
Clean maxima I was gonna do something to mine but I already has 219,800 miles on it. So it’s time to get something else I was thing about a 5.0 mustang
5.0 mustangs are dope. I’m glad you made it to 219,000 miles
Hey bro what size are your exhaust tips?
Question, did you just manually screw through the diffuser and through the car? I’ve had my diffuser for a while and the first time I put it on it I didn’t use screws and it fell off I’m planning to do it soon but I’m nervous about putting in the screws. You didn’t have to pre drill holes or anything you were able to just use a screw driver to get through both?
Yeah I used a screw driver just screwed through the diffuser and bumper. No pre drilling. Just a little bit of force and your good. Just make sure the diffuser is centered
Thinking about buying one of these next month , how is the cvt holding up ? That’s the only thing stopping me
I have 201,000 miles and so. Far it’s holding on. It can be a hit or miss
where did you buy this diffuser need one asap
I put a link to it in the description
Ya solo te falta el grill...
Esos insectos son unos loquillos jajaja
Si estoy pensando en cómo hacer el grill. Y esos insectos 🦟 estoy por darle par de puños 👊 😂
🔥🔥
Where did you get those sick rims to buy?
I got them from SpeedZone here in Florida
Nice intro bro!
Thank you. I appreciate that.
This is why you spend the extra money and buy Stillen not ebay. Looks good though
True but I wanna try these eBay parts to see how they compare to more expensive one
I wanna buy it but I worried how do are u gonna fix the corners
Use screw drop the tips and screw it up what I had to do can't see the screws if you do it right
In the upload coming today I show how I did it. Let’s say Superglue is a good friend 😂
Hopefully you are going to debadge the back. That should have been the first thing you did.
What about some rivets on the corners? Either the regular plastic clip kind (like the clips that hold all the black plastic panels on the car) or actual metal rivets.
I been going back and forth about the debadge. Idk 🤷♂️
@@HorsepowerLabs The Nissan badge I kind of understand wanting to leave that on the car . . . but not debadging the dealership sticker???? C'mon man!
@@Doublethizzle 😂 I been lacking on that
I ordered mines already lol
Nice bro 😎 it’s a nice touch
Let me get the headlights bro 🗣
There easy to take apart you can paint the insides what ever color you want buy the DRLs on Amazon do it yourself for cheaper.just pull the screws out put it in your oven at 240 degrees for 20 minutes and use a pudy knife and the lens will come right off easy.
I’d definitely do what jerry said
Blue vinyl chrome delete
You might be on to something 🤔
Jaja🤣 don't work
Front lip and side skirt looks like a clown car. Wasted money