Nissan brake pedal switch replacement (not starting fix)
HTML-код
- Опубликовано: 4 окт 2024
- Thanks you for watching please like comments and subscribe and share the love
help me help you support my channel
via
PayPal - www.paypal.me/...
cash app- cash.app/$dull...
Instagram ...
links for the parts
brake pedal switch amzn.to/3DzGQZJ
cruise control switch amzn.to/38Xabin
After sitting in my car for 45 minutes thinking my key fob died, I found this video and it saved my life!!! Thank you!!!!
There is a recall from my limited research, go get it replaced for free with an updated version
Thanks for the video, saved me about $70 bucks for a new switch and it only took literally 4 or 5 minutes to do.
Also, 41K views on this and numerous forums addressing this known issue...Nissan should be ashamed of themselves for not recalling this part! Thanks for doing this video @Dullah
Seems there is a recall now.
@@ukjoe42 I ended up trading it.
There is a recall but they don’t have the part In stock
I have a 2017 Armada & have had to get a new break switch. Nissan should be ashamed because many & more than likely all has had this issue but I called & there was no recall for the 2017. The lady at corporate said I'd have to get on another website to report the problem & get a recall started. ..... Just throw the Armada in the trash I say because it's starting to do the same thing & I just fixed it less than 3 months ago!
Shame on you Nissan! Plenty customers getting left stranded because of this issue
The switch shown is actually for the cruise control but for some reason will release the brake start issue temporarily. I did it and it worked so thank you so much. I actually bought an extra cruise control switch (correctly named ASCD Cancel Switch and Nissan Part No. 25320-BR00A) and brake sensor switch (correctly named Stop Lamp Assembly Switch and Nissan Part No. 25320-AX10A) for a 2019 Nissan Sentra SV but Nissan Altimas seem to have the same issue. You may have to give your VIN number for the correct cruise control switch. The cruise control switch is actually orange and brown and the lowest below the console. The brake switch is green and black and works in a similar way. The issue is the two metals rubbing against each other that corrode and leave corroded material that looks like dirty silicone between the contacts. The brake sensor works best to clean with a Q tip.
Now for the most important note...if you are ever stuck like this reach under the console and release the brake sensor switch by turning a quarter turn counter clockwise. Keep it dangling until you get home or to a safe place. The brake lights will show being on but who really cares when safety is potentially at risk. This provides the quickest fix that anyone can do quickly. I hope this helps others. This should be a recall that Nissan fixes but it has been going on for years with no word of an issue mentioned from Nissan. I have owned many Nissans over the years but may switch after this experience.
I only replaced the brake light switch because my slip light would come on intermittently and sometimes the car wouldn’t start. Nissan replaced it and the slip light still came on even with the new switch. They only found abs code c1116 for break light switch/stop lamp switch, cleared it and put a new switch again because they said the first new switch they put may have been faulty, so they put a new break light switch again. Does the cruise control brown switch also cause the no start issue or slip light ? Nissan didn’t replace that switch, they only replaced the break light switch on my 2017 sentra. I’m afraid that I’ll continue to have that slip light intermittent issue or a no start. Its so random. Car first did it last year September 2019. Then it was good for 8 months till July 2020 and it did twice. Hopefully it doesn’t come back. From the looks of the video the cruise control brown switch may have to be changed too. If the issue comes back I may have to tell the dealer to replace the cruise control switch too. But who am I to tell them how to fix anything? They should know this. But the dealer didn’t do that one. Cruise control switch replacement seems to have fixed the problem on this video though..
@@BarryMagroine It is intermittent and the cruise control switch sometimes works with the brake lamp switch for some unknown reason. I kept the old switches and cleaned them per the video. I think the issue will always be there because the contacts inside both switches are copper and they rub against something that looks like aluminum. This creates corrosion over time...it really makes no sense why the switches are connected but it worked for me, Dullah, and a bunch of others in the string...I need this car to run so let’s hope having a spare switch for both works.
John Casey thank you. Replacing the cruise control switch will be my next step if it happens again. They already replaced the switch twice. Second time on Friday. But since it’s intermittent it could come back any time. Slip light turns off after restarting the car. It could come back in 2 weeks, or even months like it did the first time. It’s just tough because Nissan won’t replace a part unless it is bad. It’s hard to tell them. Nissan please replace my cruise control switch because it may be working with the brake switch and it could be the reason why my slip light turns on and car doesn’t start intermittent problem. Lol basically It would be as if I’m telling them how to do their job and I know more than the mechanic lol. I’ll figure it out though. Thanks for the info, I didn’t know the cruise control switch sometimes works with the brake switch. This is a big help. Thanks.
John Casey help please!
I just replaced my brake switch with a new one. Now the brake lights are permanently on. Where have I gone wrong ? Any ideas ?
I’m having the same problem with my girlfriend’s Nissan Sentra SV 2019, also I have three lights on in the dashboard, the engine light, steering wheel light and battery light, I did all procedure this guy it’s explaining here, and nothing happened, then I did the same procedure with the switch above this one, it’s green in my car and then it’s running wild again😂😂. Thanks a lot for this information, hopefully you guys could save a few hundred with this video
Wait so did it work for ur Nissan ?
3 years later and this video is still saving lives... Thanks again for posting.
OMG. This worked. I did it by myself ( female, 51 yrs old) Step by step.. THANK YOU VERY VERY MUCH.. 💙
My man. You made me look like a champ to my wife Exactly the issue we had. Now I can get my car back. Thank You
Instant subscribe. I just encountered the same problem with my Nissan Sentra 2018. The same exact issue, had me and the mechanic all worried as we tested everything including changing battery and still had the problem. Only to come across this video and it was an instant fix. I pulled it out myself, cleaned it, opened the pins as u instructed and the car started as good as new. Something so simple that caused so much headache until I found this video. Thanks a million bro and respect to a fellow Jamaican. Keep your channel going. 👍👍👍🔝🔝🔝
Thank you so much for this video! Car broke down and thought we’d have to spend thousands getting it fixed. You are a blessing!
This video just helped me save so much money on a tow and saved me from being stranded! Thank you 🙏
I’m med student with little time and money. You’re a life saver man. Instant subscribe.
Bro… You are the man!!!!!!
I been struggling for weeks! Repeatedly pushing the start button until it starts. I was sitting in a parking lot stranded, waiting on a tow & trying to watch videos on changing the starter. Luckily i stumbled by your video. I fixed it on the spot, thank you 1000 times
Thank You! It Took 5 minutes to do, and it worked perfectly! I do recommend using a Q-tip with a solvent to clean all the contacts such as rubbing alcohol/mineral spirits/acetone (nail polish remover). They evaporate very quickly and leaves the contacts dry. I used a solvent called brush cleaner that I had around. Didn't want to put any scratch marks on the contacts. The Q-tips and solvent removed everything; the Q-tips were covered in black soot. The contacts looked brand new again.
You probably just saved me $500 dollars taking this somewhere to get fixed. THANK YOU
Thanks for the video! The Nissan dealer wanted $430.00 to replace the switch. Thanks to your video I cleaned it myself for free! Car started right up.
Thank God for your video. My wife and I called the nissan dealership and they couldnt tell us anything! Came across your video and it worked! Thank you so much! God bless
My wife's Nissan's pedal switches looked a bit different, but this tutorial gave me the gist of what to look for. I ended up having to clean black gunk from the contact points in the switches. Still, very helpful review and you saved me a few hundred from having to get her car towed to the shop because it was in our garage.
Had this exact same problem yesterday, followed your video step by step and have fixed the problem and have the car running again. Really appreciate you taking the time to make this video and cannot thank you enough for it. One thing I found useful was some sturdy cotton swabs to get rid of the gunk inside the switch easily. Thanks again.
what year and model of your car?
2019 Nissan kikc
Oh my goodness thank you so much for letting us all know how to fix up a Nissan Juke! This worked wonders for our Nissan Juke 2011! We were gonna take it to the mechanic! But my dad did exactly what you said and it worked! I’m so appreciative my car was sitting in our parking lot for 3 weeks! Thank you, your a life saver! ☺️
Thank you so much for your post. I took my car in to a shop to fix my starting problem, but they found nothing. Your post saved the day. It took 15 minutes to fix. Thank you for your post.
I have a 2014 Sentra and was experiencing the same issues lately and after watching this video, I carefully followed the steps and was surprised to see black oil covering some of the contacts. Since I cleaned it out and put it back on, the problem stopped. I managed to break a side clip while taking it apart, but it didn't cause a problem as I taped around it. I also got a few minor scratches on my hand while taking it apart, but it was well worth the effort which I didn't regret. This video is very valuable and appreciated and just wish everyone can view it if they have these problems. Thanks Dullah, you are the man dude
today is very cold 12-11-2020 in Utah my wife call me her car won't start i watch this video you saved me it really works God bless you
This worked for me as well ! Not on my very first try trying to start it. The brake was still very hard to push. I read to pump it 4 or 5 times. I let it sit for a minute & low & behold it started. Thank you very much !!
This video saved my life and a $400 tow back home!!THANK YOU!
my tow was 130😭
I just did this to my wife's car and it worked perfectly, tnk u so much u saved me some $$$. Beer is on me👍🙏🍻🍺
Thank you for this video! My daughter's car would not start. I replaced the battery I was so frustrated. Found your video and it worked! Have a great day
I had a recall on this issue and it was fixed free of charge. For anyone who owns a Nissan Sentra 2013 to 2019 model years, there should be a recall for this issue to be fixed for free regardless if you are having this issue or not. Just ring up a local dealership and give them your vin number to determine if your cars stop switch can be replaced free of charge.
I had to go back 3 times for the same problem it’s like every 3 months the car doesn’t start I’m getting a new car not Nissan
I had a 2018 Nissan Sentra that had this same issue. It was in the shop and they claimed to fix it under the recall. It still wouldn't start 70% of the time. I ended up trading the car in for a 2019 Nissan Sentra hoping it would be better. It's been in the shop 3 times now for this same issue. 2 of the times they claimed that they ADJUSTED the brake switch and applied tape to it. It worked for almost a year with no issues. This week its back to almost never starting. I've missed work and been late for work all week so far. Today for the 3rd time it was taken to the shop. They claimed that they adjusted the switch and that it's fixed. Less than an hour later after driving all the way home- here it is not starting AGAIN! Now we have to take it back to the shop again! What they're doing under the recall is just a bandaid (a temporary fix) that doesn't even resolve this problem. They need to permanently fix this issue! I've also saw a ton of information online about lemon laws for Nissan vehicles.
Nissan Sentra 2018, followed this video and this fixed my issue. So easy to do with the great instruction, most difficult part was getting the plastic caps apart. Thank you for sharing this video!
Feel like a broken record: Thank you!! Days and Days of trouble shooting intermittent starting/not starting with my 2020 Frontier. This appears to have solved it! You’re a goddamn hero good sir
You should have thanked God for giving him the knowledge to share rather than Damning him.
My 2020 frontier started doing the same thing hopefully this works for me too. Did you replace the switch or just clean it up?
Very good detailed instructional video. I didn’t bother taking it apart to clean, I just ordered a new one and I’ll swap it out.
Darth Yoda where can i order one from?
This happened to my daughters car. I followed your instructions and it made me look like mr fix it! Lol Thanks!
Thank you! I untwisted the two sensors and the car started immediately. No cleaning needed for us. I think the brake lines were filled too much and not allowing the brake pedal to travel far enough to register a step.
Turned car off. Twisted sensors back into position, and the car behaves normally.
Thank you very much for this fix. You made me look like a superstar in my daughters eyes!!!
No problem thanks for your support
That's what's up. That made me smile!!! Great work Pops!!!
You are the man! I have a 2018 Nissan Sentra and we had the switch replaced before. I was going through possible things it could be and as soon as I saw your video it reminded me how faulty these brake switches are. Took it apart and cleaned it and it worked.
Side note: Although it works I ran into the issue again the day after. I wiggled the switch it and then the car started up successfully on the first try. Gonna have to order a new one and replace it as this specific piece wears and tears faster than it should.
God Bless
Great Video. I have a 2017 Sentra. Am having intermittent starting problems. Pull the brake light switch. Took it apart. Cleaned it. Reinstalled it. Thanks for showing us how!!!! Now I shall see if cleaning it will work. If not, I probably will go buy a new one.
Thanks it worked for me with two days without a vehicle and trying every possible thing I could ❤
This was so helpful! I bought a new battery and had them check my car before realizing the real problem and fixing it at no cost! This was soooooo helpful
Omg
It worked
I just unplugged, taped the black , and put it back in.
Don’t know how long it will last but it will get me where I need to go today.
Thank you!!!!
THANK YOU BRO, YOU'RE A GODSEND. I've been on a waitlist for a couple months now because these switches are "on back order" So, I decided to give this a shot, and MY CRUISE CONTROL IS BACK AND THE CAR STARTS! My little bro will be really happy!
Bless this man with whatever he needs he saved mine and I live in AZ the heat isn’t cool at all
This video was wonderful. I thought something was wrong with the transmission or something and boy am I glad it didn’t. Thank you my friend
OMG THANK YOU! I couldn't find anything and just KNEW it wasn't the fob--you are the only one who addressed this! Thank you so very much.😃
2017 Sentra. Just want to say thank you so so so much for your video and God bless you. After being stranded for a week the car finally started after following your video. Took straight to dealership for brake stop lamp switch recall part replacement as well.
OMG, thanks a million. I’ve been having this issue on and off for a while now. I followed your video and my truck (Armada) started. GOD bless you and continue to pass it forward my brother 🙏🏾🙏🏾
Just stopping by to say another vehicle saved. Thank you my man. Doing God's work, I mean Nissans work.
I had this issue since last week, I would have to press my brake and push start like 20 times before it finally started so I was stressed because I didn’t know if my car would start that day or not. Thanks to this video I just cleaned the plug switch (there was a good amount of black/grey gunk on it) my car started up no problem.
Having the same thing this whole past week. I have to order the part no one has it. :(
@@demiphiushow long did it take you to receive the part?
Thanks SO MUCH! Couldn't disconnect the unit from the wires, but when I replace it the car started.
Again thank you. I'll get eye glass kit for separating the unit.
Thank you for making this video. I had already determined it wasn't acknowledging the brake and was read to go buy new brake switches. Didn't even think to clean it. I found lots of green corrosion inside mine. My cruise control has been very intermittently working, and I am hoping this fixed it. I also had to push the start button twice every time to get it to start.
Works Great. Thanks.
To clarify...
There are 2 switches on the brake pedal in a 2009 Murano.
Remove the larger one with multiple cables. It's responsible for cruise control and other stuff so I guess also button start control, the other takes care of brake lights, so the parts guy said.
The one with two cables is NOT the one you need to clean.
They both look different so it's easy to differentiate.
On mine the upper switch was the one to remove and clean.
Check operation with multimeter after cleaning.
Also check brakelights working after remove/refit is done.
Genuine Nissan dealership replacement part in Australia is $44 AUD, eBay about $20 AUD.
My quest had been down for 3 days. Your video got me back on the road. Thank you!
Thanks much for this video! Replaced the failing switch on my wife's car in a twist and snap!
ATTENTION: I removed the orange and brown switch from my car and took it to Nissan. Turns out, if you’re having this issue, the brake switch is recalled. Nissan will tow your car to the dealership and replace it for free. Also, the orange and brown switch is for cruise control. The green switch is the brakes.
What model do you have if you don't mind me asking
Just bought a used Armada 3 days ago and am having this issue. Thank you so much!
I knew what needed to be done, but couldn't figure out how to get the switch out. Lol. So, thank you for that. I also had to clean the second switch. Seems that was the culprit. Thank you again for the guidance.
I've been have this problem on and off for about 3 months. Used your method last night and it worked like a dream. Big up for the advice my bro. Really appreciated. Earned a new Sub 💪🏾👊🏾👍🏾👌🏾
Had this problem last night. It would only start sometimes. I was driving and everyone behind me would be on my ass whenever i was slowing down because there was no brake light. Did everything in the video and it’s working perfectly. Can’t thank you enough. For some reason my switch was filled with grease. Not sure why.
I watched your video and followed your steps earlier today.
Managed to start my car to go to work, but sadly I couldn't start it again to drive back home, but after a little while it went through so I made it home but for some reason my brake lights aren't illuminating when I press on the brakes when I drive, and I'm trying to turn my vehicle again but not luck.
I will to clean the switch again hopefully I can get it to work, stop for some gas and head to the dealership the next business day.
Thank you for this and hopefully I can get this problem solved.
Try clean both switch that's there
@@DULLAHGOSOHARD Thank you!! It worked bu cleaning both!!
No experience really working on modern cars, but I used this video and got my 2018 Nissan Sentra to start. Great job explaining what to do and why. 💪
Thank you, thank you, thank you!!! I just fixed my mom's Sentra starting issue thanks to your wonderful video. What a big help. :)
I fixed a 2019 Nissan Pathfinder with this video. Thank you
Worked on my 2017 Armada, Thanks!!!!!
Thanks for the vid. I was able to help a friend out and get them back on the road. Told them to still order a new switch just to be safe
Definitely came through when I was stuck downtown. I researched a little as well. There is a recall on 2016-2019 Nissan’s for this problem that they will fix for free
Thank you so much, I was so frustrated, I tried this and it actuator actually worked, you made me look like a hero
We are having occasional issues with a juke. It always starts. But one day... I will try to clean it first.
Easy peezy. Thanks for the info
I was sitting on gas station it happended once and it happen again today i did just move de switch and it did Start now i have to do the cleaning on the switch just like video thaks u save me hundreds $$
Watching this to find out why my sisters car never wants to start THANK YOU!
Fixed, thank you. All i did was jiggle the switch around without unplugging it but might have to clean or replace it eventually
New too
Sitting in my car tried many times and can’t get it running
About to go mechanic shop. Saw this video save me money and time
Amazing my baby started right up after that 💪🏿
Thank goodness it was covered by my warranty but wish I would’ve seen this video before and would have saved so much time and not got stranded lol. Thanks 👍
You just saved me hundreds of dollars. Thank you so very much!!
You’re video just got us home we we’re stuck thanks
Awesome information sir, colossal‼️ I was thinking I was going to have to spend hundreds of dollars just because my car is a 2014 Nissan. Great job thanks
Thanks I did this to my 19 pathfinder and it works like a charm.
Thank you!! I removed the switch was not dirty, plugged it back in and it starts! Probably loose? Thank u again!!!!
Same mine didn’t look to bad no corrosion or nothing but after I replaced it it works fine now...good video
Awesome! Performed these steps to my 2018 sentra and its back and running. Thank you👍
You are a life saver and deserve the world
Thank you so much for this. Dealership was going to charge $500 just to figure this out. And because of you I cleaned it and it cost me $0...
This video saved me $246. Thank You 🙏🏽
You saved me man. Peace and blessings to you and yours. Thank you
So glad for this video.
Ridiculous that this video is still very relevant today.
Nissan is fucked up for not fixing this by now.
Ima try this out, but honestly, best explanation🙌✨
Thank you! Saved me a tow and trip to auto shop for diagnostic!
I can’t believe it actually work thank you brother you’re the best December 17, 2021💯😎👍
Idk but this helped. I just touched it and car started it up! This has happened several times and I recently got a new battery. Back to the dealership I go
So easy to fix! I can’t believe they were about to charge me $500 to fix this!
They prey on customers who don’t know anything about cars
They’re gonna get you for as much as possible. A trusted mechanic is so important!! Most shops give the front end salespeople commission.
@@BrianKorth-nu7gw YES THEY DO ALSO, they put 3 W O's in on my 2019 my 'friend' that worked there did saying they replaced this brake switch They did NOT my daughter figured it out put a new switch in BUT still having problems
@@dennispacelli1007 I cleaned mine and still having periodic problems with my 2017 Titan. Recently it has shut off 3 times while I’m driving with less than 100k miles. I’ll never buy a Nissan again. Who knows what’s wrong with it. I replaced the MAF sensor, cleaned the throttle body and it started to idle a lot better but still……….
I just did this and it worked ! Thank you so much!
Great video! Easy to follow. The switch is a bit different on a 2013 Juke, but it still works and is easy to figure out with your walk through.
Same issue happened Nissan service could not figure out. Had to take the car two diffrent mechanics. Thanks fpr the video.
Thanks for sharing! Very helpful for my 2017 Nissan Armada.
thank you so much, was able to help a friend.
God bless you Brother
This worked for me - great video, thank you!!!
It worked very well. Saved money, time, and stress of dealing with Nissan. Thank you very much.
Thanks I unplug them and put right back in and car started 👍👍👍
800,000 recall on this tues nissan is fixing mine for free...thanks for this video
It's about time they recalled it
Thank you so much for this video, I'm taking my car in today for this issue!
Great video. Just did all this and hopefully it works. Thank you!
2021 i just fixed my breaks there back working good 👍 thinks homie from 420 delaware beach
I tried starting my 2018 Sentra and the same thing has happened, I’ve been stranded at home 3 days. I’m a girl who has never even looked under the hood. But with your detailed instructions , I feel confident I can do this. Can you send link for part? Not generic I want the real manufacture part. In the meantime, I’m going to just try and take it out, clean n put it back. If I succeed I will be so happy and confident. I’ll keep you in the know.
@Addie did it work? Mine failed again this morning
Have the issue issue as you. Thank you for the video buddy!!