Walter Tools Turning Tigertec Silver ISO-P Generation total machining Drehen Gesamtbearbeitung

FP5 GEOMETRY -- FINISHING
- V chip breaker guarantees reliable chip control during turning and facing operations from a depth
of cut of 0.2 mm
- positive, curved cutting edge for reduced tendency to vibrate and excellent surface finish quality
- undulating chip formers prevent swarf packing in turning and facing operations
MP3 GEOMETRY -- MEDIUM MACHINING OF LONG-CHIPPING MATERIALS
- Machining of near net shape parts
• Forged parts, e.g. gearwheels, ball joints, transmission shafts, etc.
• Extruded parts with thin wall thickness, e.g. protective covers, converter housings for automatic
transmissions, etc., can be machined free of burrs
- "Bullet design" gives the chip extra rigidity for optimum breaking
MP5 GEOMETRY -- GENERAL MEDIUM MACHINING
- universal application -- from smooth cuts on bar stock to interrupted cuts -- this is the solution you need for the
wide variety of components in your production process
- reinforced chip breaker blades for improved breakage and reduced rate of wear
RP5 GEOMETRY -- ROUGHING
- the stable, positive 3° chamfer for roughing with low power requirement
- open groove design produces low cutting temperature and reduces wear in comparison with previous geometries
- wider chamfer in the range of the cut depth prevents notching in the machining of crust surfaces

[@alcides38ph]

Thats tools are ideal for escalonado cut. See the angles incidentials. Or negative cutters angles. I saw that because when I was torner, I gate to give that angles.