Why isn't my PEM hydrogen bottle working correctly? It wont make a high PPM..
HTML-код
- Опубликовано: 13 сен 2024
- In this video I will show you why your PEM bottle is not making high levels of hydrogen water and how to fix it up like new.
For more information please visit www.hydrogen4he...
As with a lot of the comments, I would’ve thought my water bottle was not working properly had I not watched this video, very informative thank you.
Thanks very useful information. I was getting no bubbles and thought it was because of the distilled water and that you needed minerals. So now it makes sense. Gratitude for the time and preparation of this video.
Actually it is the other way round: I first used my own borehole water, which is very mineral rich. After a while it still produced bubbles, but obviously not high concentration hydrogen water. Where as usually I could produce about 5-6 batches with one charge, now it took dozens of batches and several days before a recharge. I was devastated, because the energy I at first got from drinking the water was quickly being lost. Then I read about the potential problem, why you can have bubbles but not hydrogen being produced: Too much lime/minerals in the water. Remedy: Soak it in some vinegar for a while. This is what I have done. Wow, what a difference: Actually on more than one occasion after that it literally blew the lid off.:-) So: Rather use distilled or reverse osmosis water to get your best results!
I felt abit dizzy first time using it and I used tap water. I read on amazon reviews that tap water can make you dizzy. Toughts? Was it because i drank the water i was suppose to rinse the device with?
I have a nice bottle I bought in grad school but haven’t used in several years. I’m hoping I can re saturate the membrane, and this is the only video on the topic I could find. Thanks!
Thanks for this! I got my water bottle from you a couple months ago! I'm enjoying the benefits!
Thank you mr steve .. my bottle is the black one in the back ... many thanks and happy healthy 2021 to you and your family .... blessing from trinidad
Amazing video! Super informative and went into detail on each problem. I have a HydroH and thought it was just cheap and broke on me already but now I know it was dry. Thx a lot.
Thank you, I almost returned mine 😂, appreciated 🎉🎉🎉
This is useful. I feel like I should have ordered the reagent when I ordered my bottle.
What I understand from your videos and expectations is that any generator with SPE and PEM is useful to buy , it is correct ? It’s the first time to read and search about hydrogen water bottle ! Thank you
Thank you so much for the video. The membrane on mine was not saturated, and not producing bubbles.
I had the same issue with my hydrogen bottle all you have to make sure it is to get it completely soak the membrane it doesn't even need to take 24 hours tap it lightly from the bottom so that the water really seeps into it when I sit there for a good like 5 minutes or three honestly once you've done that turn it back on it's going to have a full function of bubble work and you'll really see a producing hydrogen
Thank you for this video. I am a little confused about the over saturation. So if we run a bottle, should we then remove the bottle and let the membrane dry out between bottles? If we make water several times a day for a few people in the house, will that over saturate it? If we let it dry out between bottles, won't it then also have a dry membrane problem?
This can be a tricky phenomenon. I find it best to leave a bit of water in the bottle and turn it up side down. This way the membrane will not be wet but still gets moisture from the humidity. If you are using it several times a day you will not have to worry about this. It's when the bottle sits for a couple of days with or without water in it that causes this problem.
@@Hydrogen4Health Thank you so much, I understand that much better. 🙂
@@Hydrogen4Health Sorry I have another question. I know you said you are going to be doing a video on how long the hydrogen lasts in water. My question is, if I do an Evian water bottle on my machine. Then as soon as it is done put the lid on tight. Will the bydrogen last until it is opened before it starts dissipating? I would like to do several of them for my friend who has Parkinson's to try. Give him enough for a few days. He will buy his own if it works. But I would hate to give him several days worth, him try it and nothing happens because the hydrogen didn't last in a closed bottle. Thanks for all your help.
@@shellic5166 I do not know how long it is goi g to last but I know it won’t last for days. I’m thinking hours.
Thank you so much for this presentation. Really helped a lot in troubleshooting pem bottles.
Thanks for this, it's really helpful 😏 I wonder if mine works properly because of the big bubbles with wall ones .. I don't see big bubbles on yours 🤔
Mine as well
I have the second bottle from the left "Hydrogen Water" ... out of the box, I followed the directions however after plugging the unit in, I cannot tell if it is charging. The directions said it should turn red. I don't get red, I do get green but still don't know if this is the charging stage or not. I'm totally confused. If you can give me some insight would be helpful. Thank you.
Excellent video 👍 am I right in thinking that if a hydrogen bottle is used regularly, say 3 to 4 times a day, spread throughout the day, that would eliminate the danger of an oversaturated membrane?
You're absolutely right.
My pitcher from IonBottles produces lots of bubbles and a slight ozone smell which is supposedly normal. Issue is I bought test drops to test dissolved h2 and even one drop doesn’t go clear. Is the pitcher not producing any hydrogen? I ran high cycle twice and same result tested right away once cycle was finished.
Ion bottles is the new headache in this space. They sell a few products that are just plain bad for you. Your pitcher is one of those examples. See my video "is hydrogen water safe" your pitcher produces chlorine, ozone and very little hydrogen.
@@Hydrogen4Health I have chlorine testers as well, and there was no change in the amount of chlorine before or after the cycle was ran so I will disagree with that particular statement. Now, is it producing hydrogen, the jury is still out.
I will watch your video, can you share the link? I can’t seem to find it on your page.
In your opinion what is the best bottle? preferably I’m looking for a machine that has more volume without the expense
hydrogen4health.com/h2-nanov3-hydrogen-water-bottle/
Thank you.
Thank you! Very enlightening!😀
What does it mean if doesn't wanna turn on
Hi bro which is a good brand for Hydrogen water generator bottle
We like this one the best : hydrogen4health.com/h2-nanov2-hydrogen-water-bottle/
This didn't work for my bottle. What else can I do?
I want to ask one more question.. Are these problems can be in hydrogene bottle which has auto cleaning system (ozon) feature ?
I do not want to test and troubleshoot a water bottle.
So I generic bought a Hydrogen jug and as I didn't want to use tap water so I used distilled water instead but no bubbles formed. I then saw the instructions say distilled water is not recommended. So I added a pinch of sea salt which started the bubbles off, but am I making any unwanted gases in addition to hydrogen as it has a funny smell to it now?
Yes adding salt to a bottle that doesn't use PEM technology will generate chlorine and chlorine gas. If it's not PEM tech it should not be used, unhealthy.
Useful video as always.
Hello..Thanks for your video.I want to ask that what is the life of the membrane?Can we clean it manually to longer the life of it?
You should clean these bottles with food grade citric acid every few days. Let it soak overnight. Especially if you're not using distilled water, you should clean it often to prolong the life of any PEM water bottle
Very informative video thanks. I just got a new bottle and it said to do 2 cycles with 50-60’c water before using. Both cycles produced plenty of bubbles, then I’ve tried a few cycles with room temperature distilled water and I get no bubbles? Then I filled it up with warm tap water again and it was back to producing lots of bubbles?
This doesn't sound like a pem bottle, be wary.
@@Hydrogen4Health oh ok thanks. What could it be if it’s not? It definitively makes lots of bubbles with tap water both warm and cold but nothing with our home distilled water. Not even a trickle of bubbles
Is it really healthy? How much time it takes to feel the effects?
I noticed a clear difference within the first week! But I had for a long time problems with low energy, so if you are healthy and fit you may not notice a clear difference, but there is a lot of research that was done and is being done: It is extremely healthy, for many different health issues!
Steve p,
Can you get one of these and test it?
Marshall got a container of these but they are not selling dy enough to warrant continued sales.
You can make an offer for 45 or less and he will accept it.
Please tell about the appearance of bubbles in the water. Namely my bottle is making hydrogen/bubbles and they are very visible . But a minute after the cycle is done bubbles disappear, water is again crystal clear? Does it mean we in fact drink water empty of hydrogen because it immediately vanishes? Thank you
Nano bubbles will stay in the water. These are bubbles the eye can't see.
I have a problem that's somewhere in between these 2 scenarios, i have hydrated the membrane for about 12 hours since it arrived and then started using it, it was fine for a week, until the bubble production started dwindling. I never let it sit dry since I started using it. I even ran the cleaning mode and then did a soak using citric acid and warm water. But the bubbles kept reducing until it completely stopped having any bubbles anymore when I run it (even for several more cycles). Should I let it dry out, or keep it soaked for several days? Confused
Put a bit of water in it and store it up side down after every use. The membrane will stay moist but wont get over saturated.
Well I didn't get test drops with my unit and It was like 82.00 but I am wondering where to get the test drops.
Hello, i have not used my H2 for a while and just came back to use it after around a month. I usually leave a tiny amount of water on the membrane under the cap after use so it doesn't dry out, unfortunately on returning to use it today the membrane is dry and i have no idea how long it has been like this. I have tried to run numerous times but i am not getting much hydrogen, only a few large bubbles....is it possible i have permanently damaged the membrane due to it being dry for a few weeks or will i be able to fix if i let it saturate and keep running cycles? please help.....
I think it will be okay. Let some water sit in it for a couple of days.
@@Hydrogen4Health brilliant, il keep at it and hopefully be hydrogenated by the end of the week🙏❤️👍
My H2Lite water bottel stopped producing any bubbles... none of these solutions seem applicable. Any advise / idea ?
Me too.
@@ellenkehoe208 Check that you have removed the cap inside - to me it was not clear that I needed to do this - remove the white cap inside
When I press the button to turn on, it works for two seconds and stops plus the light goes out. I've done what you suggested but no joy. When new It's worked for two weeks with no problem .
I’ve ordered a N324 and right after i’ve saw those debates between N117 and N324 and they say that the N117 is better because the N324 is unstable and leaking, is it true or they just don’t know how to make it work?
I do not know the answer to that.
I thought the bottle always had to have a bit of water stored in it between using, is that wrong?
Yes you are correct.
What does PEM stand for?
Google
Mine has a white powdery looking residue at the bottom after it’s been producing hydrogen is that normal ?...when I shake the bottle it mixes in with the water ?...what is that ?...is it the hydrogen ?...is it safe ? Or does it need cleaning ?...it’s brand new I’ve ran it 3 times...thank you if can help be appreciated
Do you have calcium in your water?
What is the expected lifespan for the H2 Nano?
5+ years
How come the hydrogen bottles don’t work with purified water? My boyfriend and I both bought hydrogen bottles. Two different brands. When I got mine I filled it with purified water and it didn’t work. I then put tap water in it and it worked great. So, we then tested both bottles with tap water, filtered tap water, spring water, well water, and purified water. Both bottles worked great and made a lot of bubbles with all the waters except the purified water. Neither bottle worked with the purified water. Both bottles ran the whole cycle but nothing happened. No bubbles. So, two different bottles, two different brands, and sane same results. Is purified water not usable in hydrogen bottles?
It's because you're using a cheap product that not only doesn't make therapeutic levels of hydrogen but is unhealthy, putting chlorine and ozone into your water. Take a look at this video, I explain : ruclips.net/video/xd84wnlUWCA/видео.htmlsi=7Uz8cWcZoxHszaRY
I did watch the video and I did buy chlorine and ozone test strips and there is no ozone or chlorine in the water. I did receive the correct response from someone else. Thank you anyway.
@@lisajohnson6296what was the issue???
@@rickycruz7446 I did receive the correct response from another RUclips channel and it’s that hydrogen bottles do not work with purified water because purified water has no salts in it and the electrolysis cannot work without salt. So, I did a little test and I put purified water in my hydrogen bottle and added a dash of salt and then it did in fact work perfectly fine. So glad I didn’t listen to this channels response as his response didn’t even address the question which was why doesn’t purified water work in hydrogen bottles. He just replied that you have a garbage bottle and said to watch the video. Maybe he should read and answer the actual question.
Hello do you guy offer company registration warranty for the H2 nano?
Yes it comes with a 1 year warranty.
@@Hydrogen4Health Do I need to register the barcode. I had received mines a couple of weeks ago?
Mine is nit a fine mist like this. Its very faint fine mist and a bunch of larger bubbles.
Ive done everything suggested here. Still no better. Is mine broke?
Large bubbles indicate your bottle's membrane isn't sufficiently hydrated.
@Hydrogen4Health Thank you. I left the bottle full sitting in the counter for most of the day and evening. Can it really take that long to satirate the membrane?
Ill leave it for a full 24 hours and see what happens. Thank you for your time and advice.
I have one I just bought and I’m not getting any bubbles whatsoever it’s from hydro lite any recommendations would be appreciated
Maybe a dry membrane, put some water in it for a day or so and try again.
@@Hydrogen4Health it worked for a couple hours when I got it but not very strong and now nothing
I can see uour logi clearly ..screen ..
But the screen is all black
My PEM bottle produces very large and sparse bobbles instead ( bottle is new) I don’t understand what is wrong with it
Put some water in it and let it sit for 24 hours and then try again. The membrane is dry.
@Hydrogen4Health Can the membrane still be dry after 12 hours of letting it sit full? I have this same issue and still after 12-18 hours of letting it sit full
Someone tell PLUG to shutdown the business we have found and easier way 😮
Can you please test the Superflaška from www.superflaska.si/ ?
tap water???? ok
Nothing works. It works good than it goes back to not working. Which is more times not working 👎