HDMI to Coax on the Cheap | HDMI to Analog Coaxial Cable

Поделиться
HTML-код
  • Опубликовано: 18 сен 2021
  • HDMI to Coaxial cable on the Cheap - HDMI to Analog
    Exploring an inexpensive way to send an HDMI video source through coaxial cable, to use with a home-run cable system.
    Buy an HDMI to RCA converter: (please note the following links are affiliate links and as an Amazon Associate I earn from qualifying purchases)
    amzn.to/3ZOKbxZ
    amzn.to/3Kl73jb
    RF Modulator - RCA Composite to RF Coaxial - Converts Standard Definition Signals to Coax, Includes AV Cable
    amzn.to/44kQ9sG
    Mini analog TV Channel Modulator works great to make your own home TV channel:
    • Mini analog TV Channel...
    Make your own personal analog TV channels at home | UHF TV Channel Modulator | Video sender:
    • Make your own personal...
    Making your own Home Cable TV System | analog channels using a UHF Modulator
    • Making your own Home C...
    Use your VCR to send a video signal to a second TV
    • Use your VCR to send a...
  • НаукаНаука

Комментарии • 80

  • @arickle
    @arickle Год назад +4

    Exactly what I was looking for to have a playlist going on multiple TVs across the house for a party. Thank you.

  • @roltgen1
    @roltgen1 2 года назад +4

    Thank you!! I bought an old TV and this video gave me to much information on how to connect to it. I appreciate it so much

  • @Nicholas_Chris
    @Nicholas_Chris 2 года назад +11

    Last year I did the same setup like you have. As source I used my AMIKO A5 4K COMBO and put on NASA UHD. My friends were confused on how a CRT TV can receive a 4K channel on analog. And there was no SCART or RCA connection just the antenna coax cable. They didn't know about Converters and RF modulator. No to mention connecting a PS4 an playing GTA 5 on a CRT.

  • @PappyNet01
    @PappyNet01 4 месяца назад

    I am glad I found your RUclips channel: we purchased this small device early this week and it arrived yesterday. Our small kitchen TV - Vizio 27-in - broke a couple of weeks ago and I have been unsuccessful in finding a small TV that meets our maximum height requirement - no taller than 17 1/2-inches. I retrieved our smallest TV - Sylvania 15-inch TV (Model # LC155SL8P) LCD HDTV
    - that has been stowed in one of the bedroom closets to replace our Vizio-TV. I initially installed it without the USB power and it worked fine, but until I read the specifications again I used one of my old USB plugin chargers. I think the USB is just a connection point and not a power supply! Thanks for the video and links!

    • @NorthcoasterHobby
      @NorthcoasterHobby  4 месяца назад

      Glad you solved the issue. Thanks for your comments and for watching my channel!

  • @Fuser-wx7cq
    @Fuser-wx7cq 10 месяцев назад +2

    I need this the other way. No coax on TV but use an antenna. Need to go from coax to hdmi

  • @proaseocleanproductodelimp3293

    Hola amigo . Usted es un maestro . Graias por sus consejos .
    Tengo una pregunta ...
    Necesito conectar un cable coaxial con señal de canales de tv a un vídeo beam HDMI como lo haría ?

  • @wassen46
    @wassen46 Год назад

    Can I use it to output only HDMI audio from my tv to analogue speakers?

  • @blueymackenziereacts9107
    @blueymackenziereacts9107 2 года назад +1

    Hey! I had that same RF modulator, I used it on my flat screen tv and I flicked a switch that went to 115v, and it shut off like a REAL analog sign off.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      Yes, the colour test pattern thing is cool, neat that it does that.

  • @rogerg4916
    @rogerg4916 10 месяцев назад +1

    Is there one device which will do what the converter and modulator together do? That is HDMI to coaxial?

  • @Nicholas_Chris
    @Nicholas_Chris 2 года назад +2

    I would recommend an dual or trishield RCA cable I had some interferences because of the RCA cable.

  • @bnewcol
    @bnewcol Год назад

    I have a small Daewoo that only has the yellow and white inputs, can I just get the HDMI converter with the RCA cables and only use the yellow and white input to the TV? I want to hook up Roku to it. Do I need the RF modulator as well?

    • @NorthcoasterHobby
      @NorthcoasterHobby  Год назад

      The HDMI converter would work fine. No RF modulator needed in your situation.

  • @omarnavarro9690
    @omarnavarro9690 2 года назад +1

    Hi! great video!
    Im just wondering if this works for a pc that has no hdmi plug, It only has a coaxial one. I want to mirror the screen to my TV.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      Hello, thanks for watching. I think that would need a different adapter. Is there another display output like a DVI or VGA you could adapt?

  • @jackdeth613
    @jackdeth613 Год назад +2

    Did you try running the USB power into the adapter? might be needed for upscaling to 1080... I don't see it plugged in, which is why I ask...

    • @NorthcoasterHobby
      @NorthcoasterHobby  Год назад

      It is plugged in. It won’t work without power. In the scenes where no power cord is shown those are for demonstration only. In the scenes with the content on different channels, the adapter is powered. Thanks for watching!

  • @ldtuber24
    @ldtuber24 10 месяцев назад

    will this work going to an analogue tv or do I need a digital signal converter box too like they came out with when everyone switched over to digital over the air signals?

  • @FrancisLitanofficialJAPINOY
    @FrancisLitanofficialJAPINOY 2 года назад +1

    US / Canadian Samsung LCD and LED TVs doesn’t work on PAL, PAL-N nor SECAM. works on PAL colour, but having problems with 625 line video that stretched down on AV inputs. AV inputs on Samsung Smart LED TVs (US/Canada), only works with any 525 line video systems: NTSC, NTSC-J, PAL-M, NTSC 4.43, PAL 60 (525 lines only).

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      Thanks for the information!

    • @FrancisLitanofficialJAPINOY
      @FrancisLitanofficialJAPINOY 2 года назад

      @@NorthcoasterHobby I also have Devant (Hisense) LCD TV in the Philippines, Pan American analog TV tuner only with 3 Video systems with system M/N sound carrier (NTSC-M, PAL-N, PAL-M)

    • @FrancisLitanofficialJAPINOY
      @FrancisLitanofficialJAPINOY 2 года назад

      @@NorthcoasterHobby Sony Bravia 2010 model from Canada (120 - 240V), with SECAM PAL NTSC multisystem video inputs, for analog TV tuner (US standard), also accepts only NTSC, PAL-M, and PAL-N in full colour. Using RF modulator TM-70 or channel 3/4 modulators.

  • @Carlosization1
    @Carlosization1 Год назад +2

    Would this work to send a digital audio signal from Zone 1 to Zone 2 on my Yamaha receiver. The reason is zone 2 only accepts either internet radio or analog signal. Do it would be HDMI to RCA. THANKS!! Great video! 0:15 by the way, the goal is to be able to have Zone 1 and 2 to simultaneously play the same Fire TV digital signal from the YAMAHA AVR.

    • @NorthcoasterHobby
      @NorthcoasterHobby  Год назад

      It should work if you simply need to go from HDMI to RCA analog. Thanks for watching, best wishes.

    • @jacobfreeman7427
      @jacobfreeman7427 28 дней назад

      Did you figure this out? I want my avr to send video to a crt in another zone, so pretty similar

  • @richardramirez717
    @richardramirez717 2 года назад +1

    How can I connect cable and air (both signals arrive by coaxial) to a TV that has a single coaxial input. Thanks in advance

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      Options for combining 2 TV Antennas into one Coaxial Cable
      ruclips.net/video/dym7UAR22ug/видео.html

  • @diegoisbae1438
    @diegoisbae1438 2 года назад

    just a curious question does this work like for a xbox 360 i’m trying to connect to this old Zenith tv i got from my grandma that only has coaxial

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      You might have to set the video resolution output to 480p for it to work.

  • @brucekazakos8647
    @brucekazakos8647 Год назад +1

    I have a JVC Amplifier and it has a coaxial input,but my TV has 2 HDMI outputs. Can i use this for Audio?

  • @incognitoburrito7458
    @incognitoburrito7458 8 месяцев назад

    So I have an old 1995 TV I'd like to use as a monitor for streaming things on from my computer to the TV. The TV only has a coaxial plug and no RCA plugs so I assume I can use an adapter that connects directly from HDMI to coaxial. I want to know if this is possible since I have seen these types of adapters on amazon but I'm still suspicious that it may affect the quality of the connection if it is even true that I can connect directly from HDMI to coax. Furthermore, I've seen quite a few RUclips tutorials that use RCA and have yet to see one that uses an adapter that connects directly from HDMI to coax.
    With that being said, is it possible? Can I connect HDMI to Coax without the need for RCA?

    • @NorthcoasterHobby
      @NorthcoasterHobby  8 месяцев назад

      Radio Shack used to make such an adapter. Model 1500664. But I don't know about current availability.
      amzn.to/3QHQSRe

  • @demonprincess5634
    @demonprincess5634 8 месяцев назад

    need a rf to hdmi or rca for my atari 7800. but everywhere i look it only hdmi to rf.

    • @NorthcoasterHobby
      @NorthcoasterHobby  8 месяцев назад

      Will this work? Connects the phono plug to an RF. Connect to TV's Rf and use channel 3.
      amzn.to/3Gh7NUL

  • @robertshade8631
    @robertshade8631 3 месяца назад

    At 3:42 you hook converter to vcr why ?Later you connect rf connection?

    • @NorthcoasterHobby
      @NorthcoasterHobby  3 месяца назад

      It was because in that particular example I was using the VCR as a way to convert the RCA signal to an RF signal. The VCR modulates the signal to RF channel 3 or4.

  • @rogerg4916
    @rogerg4916 10 месяцев назад

    Could I use an HDMI to BNC converter then just a BNC to type F coaxial adapter?

  • @thecolorenhancmentchannel432
    @thecolorenhancmentchannel432 2 года назад +1

    Hey. Can I cut a coaxial cable in half and then cut an hdmi cable in half and wire the two together that way? I found my old portable tv that still works and I want to connect my Roku express to it. My Roku runs off of usb power.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад +2

      That won’t work. An HDMI signal is digital. coaxial would be analog. Use the adapter, it’s the best way.

    • @thecolorenhancmentchannel432
      @thecolorenhancmentchannel432 2 года назад +1

      @@NorthcoasterHobby Ok. Thanks. It would be cool if I could do that. I wish my Roku had capabilities with the coaxial output! I would’ve been able to take a portable battery bank to it, and screw a coax cable into my portable tv and to the Roku.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      @@thecolorenhancmentchannel432 I get what you’re saying but the HDMI to RCA converts the signal from digital to analog, then the RCA signal can be modulated to an RF TV channel.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      @@thecolorenhancmentchannel432 does your portable TV have AV input?

  • @signsofthetimes2971
    @signsofthetimes2971 2 года назад +1

    Is there a way to reverse this? Coax in from an antenna to HDMI out?

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад +1

      They make a reverse device like the one I use in the video. It’s an RCA to HDMI converter. You would still have to adapt the coaxial cable to RCA, and they make plug adapter ends for those too. Thanks for watching!

    • @FrancisLitanofficialJAPINOY
      @FrancisLitanofficialJAPINOY 2 года назад

      @@NorthcoasterHobby RF TO HDMI (converts PAL SECAM PAL-M PAL-N NTSC RF signals to HDMI)

    • @dario_p.b.
      @dario_p.b. 11 месяцев назад

      @@NorthcoasterHobby hi, im trying to conect an old console to my hdmi tv, the console (simillar to the magnavox odyssey) emits signal in analogical coax, could you or some good samaritan out there please help me? im really confused with all this diferent types of cables and i need help 😭😭😭

  • @mystick-kq5iz
    @mystick-kq5iz Год назад

    Is it possible to not pass it through a VHF device and instead through a dvd player?
    Thanks in advance !

    • @NorthcoasterHobby
      @NorthcoasterHobby  Год назад +1

      Do you mean a device with pass through via RCA? Even a VCR could be used for that purpose. You wouldn’t need a modulator then.

    • @mystick-kq5iz
      @mystick-kq5iz Год назад

      @@NorthcoasterHobby yes , sorry , I didnt remember correctly the VCR
      Exaclty , only the hdmi2Av if I understand right

    • @NorthcoasterHobby
      @NorthcoasterHobby  Год назад

      @@mystick-kq5iz It depends on what format you want the output to be.👍

  • @mexdrago3009
    @mexdrago3009 6 месяцев назад

    I need it the other way around.

  • @FrancisLitanofficialJAPINOY
    @FrancisLitanofficialJAPINOY 2 года назад +1

    HDMI TO AV DOESN’T STRETCH ASPECT RATIO. USE HDMI TO VGA and VGA TO VIDEO (NTSC-M, PAL-M, PAL-Nc, PAL)

  • @dario_p.b.
    @dario_p.b. 11 месяцев назад

    your modulator link is wrong, please fix it

    • @NorthcoasterHobby
      @NorthcoasterHobby  11 месяцев назад +1

      It is now fixed, thank you for telling me about it.

  • @peaceman7072
    @peaceman7072 2 года назад +1

    Do they all have sound aswell? Thanks

  • @friendsforever8068
    @friendsforever8068 2 года назад +1

    Where did you buy this modulator?

  • @TheNightcoreFox821
    @TheNightcoreFox821 10 месяцев назад +1

    To price I pay to play videogames useing hotel wifi and tv

  • @stanleybest8833
    @stanleybest8833 2 года назад +4

    I don't buy any HDMI only devices.

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад +1

      Absolutely. It’s always good when a device has more than one connection option.

    • @theguyof360
      @theguyof360 2 года назад +1

      were it so easy

  • @theguyof360
    @theguyof360 2 года назад +1

    59th like

  • @richardramirez717
    @richardramirez717 2 года назад +1

    How can I connect cable and air (both signals arrive by coaxial) to a TV that has a single coaxial input. Thanks in advance

    • @NorthcoasterHobby
      @NorthcoasterHobby  2 года назад

      Options for combining 2 TV Antennas into one Coaxial Cable
      ruclips.net/video/dym7UAR22ug/видео.html