How to Change a Watch Strap and Spring Bar Basics - Watch and Learn #9
HTML-код
- Опубликовано: 4 дек 2016
- In the 9th episode of Watch and Learn, we show you how to change the strap or bracelet on your watch. It's a simple undertaking that can really transform your watch without costing much. Afterwards, we will break apart a spring bar and show you how they work, and why you need to check them every time you change your strap.
For a link to the tool used in the video, please visit: www.longislandwatch.com/Watch... 
Хобби
I watched this video after spending over an hour yesterday trying to change an expansion band from one watch to another. I bought a watch repair kit from Amazon. After it arrived, I could not figure out from the cryptic instructions how to use the spring bar. Since I readily admit to not being the brightest bear in the country, I watched the video again, watched whole video on how to use the tool, and was able to change the band in about 4 minutes . Everybody else might never need the video but it worked well for me. Thank you for taking the time to make it
Owe you another beer, was having huge probs putting on a nice MM300 bracelet, this saved the day.
I installed a NATO strap on my Citizen watch tonight with the help of this video, even though you only talk about NATO straps for a few seconds. And the rest of it was super-informative. Thanks!
I have been struggling for over a week to get this watch band on. I thought I knew what I was doing. No one would do it for me because it was a Samsung watch and they "do not sell them." So I ordered my own watch kit box with springs. I have struggled and struggled. Finally googled it and you popped up. YOU ARE THE BEST TEACHER EVER!!! Bam, first time, I got the springs in. Thank you from the bottom of my heart Mark for having a video of such online. Best Wishes to you from Sebring, Florida.
I love seeing these old W&L videos, they show how the simplicity and straightforward nature of the series has never changed, just the lighting and background (for the better).
Hi Mark, I just want to say how much I love these videos. New to the hobby and trying learn how to DIY as much as I can. The expression "tricks of the trade" is so appropriate for what I'm going through lol. Changed my first strap! Scratched the hell out of the lugs!!!! Bought a cheap spring bar tool, lesson learned.
Wow ..wow...thank you for taking the time to share these skills !! Helped me immensely
Thanks! You are a good teacher - clear, concise and you don't gloss over the details (I love the details)!
Great stuff Marc, I for one certainly undervalued the importance of the humble spring bar!!! No more though thanks to you..
Received my DS5X bracelet from LIW. Planning to install it in my DS57 today. These videos and buying from LIW are a great combination.
This is exactly the video that I needed to watch, as I'm planning to swap out a bracelet for a leather strap next week. This is incredibly helpful information. You explain everything in perfect detail. Thank you!
Great, glad you found it useful.
Love *ALL* your videos Marc! These learn ones are awesome! Thank you so much for them. Somebody below asked about resizing Seiko bands and you have mentioned the warning several times about them. I don't understand the issue so I too would love it if you covered it. Thanks a million!
Many, many. Thanks I did this myself with no problem. Again thanks and God bless you and all your loved one.
Excellent video Mark! Thanks for sharing your expertise.
This is so good to learn. Thank you for the watch and learn series.
I had a reoccurring problem with the end link of my bracelet. The bent spring bars would always come out of the holes in the lugs and there were 2 sets of holes for some reason.
Took it to a few jewelers for new pins and the bracelet kept unfastening anyways.
Ended up using JB Weld to affix ths spring pins in place to the end links and the end links to the lugs on my cheap chinese beater that I wear to work in the machine shop.
Best watch related series on RUclips! Loving your stuff Marc. I'll be buying a watch from your site soon
Thanks for watching!
Good!
@@islandwatch I have my WWE watch band can I change the links to a Strap or not
the 2nd part of your video is what really won me over. Very detailed and informative. Great job.
Thank you! I changed my Citizen strap which came with new pin bars while watching your excellent video.
I recommend turning the watch over and removing the spring bars from the backside of the lugs. Over time there will be minor scratches from this action...best to have them hidden on the back of the lugs. Never paid much attention to the bars....from now on will regularly check their springiness. Thanks for the upload.
Thanks for watching! Changing a strap on camera is quite an undertaking!
Love these Videos!!! THANK YOU SO MUCH!!
Discovered your site via TGV Urban Gentry. Great video. Hugely informative - especially the info about spring bars. I have my eye on a Squale from the website and will definitely be in contact with you. Keep up the great job!
Thank you!
Keep up the great work, Marc! Bonus points for introducing me to the SNZH55K1 in this video, now I have the blue version on my wrist.
Excellent for people who want to get in to the fix themselves side of watches and for their personal satisfaction, you really do this well Marc 👍👏👏
Thanks!
Hi Mark, thanks for this video. Just did my first leather strap change. Put a an old crockskin Seiko strap on my Grandfathers old Rothermans.
I just ordered a titanium bracelet from you guys today to swap out in my victorinox divemaster 500 titanium. This video looks like it will help me out quite a bit! Thanks!!
This video was really helpful. I ordered a kit so I can do this myself since my jeweler is shut down from the pandemic. Thank you!
Thanks Marc. Yet another of your useful, informative videos. Have a wonderful Christmas Season..
Thank you for watching.
This had been very very interesting indeed. Everybody wears a wristwatch but only a few are able to get through those details. YOU get a glimpse how to change the straps in a sophisticated way so your watch won't get lost. Highly recommended to know about.
Thank you Mark, this was awesome.
Best watch-channel on RUclips by far ... Thanks for all the vids Sir 👊
THANK. you for this video! I was about to throw out a new watch band due to not knowing how to install the spring clip.
I had no idea how to remove the awful watchband that came with a watch I just recently purchased. Your clear and simple demonstration allowed me to be able to both remove and replace the strap on the watch. Thank you.
Watch and learn is the reason I subscribed. The best educational series about watches on RUclips, hands down!
Great. Many thanks for your trouble. Please keep on with your series.
Great video Marc. Really helpful and informative.
Excellent information with clarity.
What I like about it it's not just the timepeices on itself but the educational things around it. always waiting for the next one to come up. By the way the junk watches.... You can send the junk watches to my place :D :D
Informative video. I do most of my own adjustments these days but this was helpful. Wasn't aware of the Sieko 5 and glad I seen this before racking my brain! Lol 😆 Thanks
Thank you for the info! Exactly what I needed to know to replace mine 👍
Thank you for making this, it's very useful for someone new to watches.
Wait a second here! Your not Philip Raagner, your Robert Taylor, and who do you think your fooling with that old photo, you couldn’t possibly still look that good.
I didn’t watch very long, how common is it for everyone to have measuring calipers, and to just pull out their handy strap changing tool ? but if that wasn’t disappointing enough, he’s measuring in millimeters. So that’s where I stopped, I guess I’ll just have to go to the watch repair shop. He’s a pretty nice guy, but for quite awhile now he’s been sitting in there by himself scared to death, & looking he’s a member of the klu klux klan, and insists that whoever comes in looks like a fellow member or ready to perform surgery.
your videos are so useful and I like my black strap Lexington so much! Thx Long Island Watch.
Great, enjoy!
great video and thanks again for the ray raven ii . love it
Great, enjoy!
Thanks so much! I'm about to perform my first strap change.
Awesome Video. Thanks for taking the time to make these Videos. It's a Great source of information for those of us new to Horology and Wrist Watches in particular.
Thanks for taking the time to watch.
That was *one* cool lecture. Thank you.
You and your videos are extremely helpful and invaluable. Thank you sir 🙏🏾
Subbed
Thanks Men ,that really help me a lot ,and on the way I learn a few other stuff
I usually use my nails to change the straps and spring bars, works just fine and easy :) Oh, and I just replaced my strap on an Orient bambino that I purchased from Marc in 2016.
Love the choices for your WWC bro
thanks!
Hi Mark, Can you show and advise of how to change a Seiko metal strap, from a Seiko Padi, but then replace it with a metal strap that I bought of better quality, I think it's a Jubilee bracelet for Seiko models, it has the same Seiko ends, I managed to get the bracelet out, but how on earth do you get the spring bars on the replacement bracelet back. I have spent hours trying too no avail. I watch all your videos and can't say thank you enough for all your wonderful presentations. am scolling your Web site, you have a great choice many thanks Ronnie.
thanks for this very useful and educational video!
im fixing my watch strap ive bought watch spring bars so needed to see something like this
Great learning video Marc. Love my Seiko watches except of the integrated stainless bracelets. I have 2 and neither have failed yet. Hopefully in 20+ years Seiko will offer replacement bracelets.
I have had a Seiko watch since 1974. It finally broke where they could not get parts. It was one of the first “move-your-wrist-wind” watches made! Gosh I wish…
Great video and series! Fyi, Citizen sometimes uses a variation of pins and collars where the collar sits in a little hollow in the center part of the link. Downside is you can't tell by looking before you start. Good side is you don't have to fight the collar when reinserting the pin - just make sure you put in back in the center link - or later the pin falls out and the watch falls off.
Thanks for sharing; just another reason to always be careful and watch everything when you're sizing.
As always.....good video.....👌🏻...your video makes me so comfortable to change stainless steel bracelet & straps easily. 🤪
Thank you. Great video, Mark!
Great work Mark I really appreciate this video!
Glad you enjoy it.
Very nice video. I learned lots. Thank you very much....
great series, much needed. thanks
Thanks for watching.
Helpful video as always, really like watching the “watch & learns”. Not sure if you’re posting these anymore, but I would love for you to post a video putting the bracelet, preferably one with a solid end link, back on. I understand that it’s just the opposite procedure as removing, or at least in theory in should be, but I am having a heck of a time putting my TAG bracelet back on my TAG watch head. I took it off so that I can change out leather and silicone bands, but I’d love to learn how to re-attach the bracelet with ease so that I can switch between leather, silicone and the bracelet. Maybe you can show some tips or tricks of the trade to make it easier? For reverence, just as an FYI, I have the TAG Aquaracer WAY211C.
Good video Marc. When trying to buy spring rods, manufacturers provide the barrel length and barrel diameter but not the tip length. I just bought some high strength generic rods for my Casio Pathfinder watch with a titanium bracelet. A heavy bag of fertilizer fell out of my hands and snagged the watch band shearing the spring rods. I ordered new rods but did not have the old tip lengths. . The replacements had the correct barrel length and diameter but the tips were too short to fit properly into the bracelet itself so I scrapped them. The end of the bracelet is Y shaped and straddles the solid plastic lug on the watch. The bracelet/watch attachment points on the bracelet where the tips seat are about 5mm in length which is non standard. So instead of cheap generic spring rods I have been forced to buy OEM pins for $14.95 with a handsome margin for Casio.
People like me do not have your expertise and are simply looking for a simple solution like "these rods fit a Casio-1300T" for example and if advertised properly that margin goes to you. I assume the same thing applies to Seiko watches. Same thing for those overpriced metal turtle bracelets that Casio sells for between $120 - $200. Again market your product line properly and those margins could be yours.
Thank you Mark, what is the reference of the seiko 5 with integrated bracelet?
Will you be able to figure out an adapter to put a nato on a swatch?
hey i have a jacques prevard and one of the little bar things came out that holds it together could you possibly make a video on that?
Great video, do you have any advice on changing the original bracelet on a Samurai? I'd like to switch mine out for a Crafter Blue, but it's like wrestling with an eel!
Once again another fantastic video Marc.
Thanks!
Great video man thank you. Any recommendations in regards to spring bar tools? Seen them on amazon from about $5 up to hundreds... I dont have anything super important that I would need top of the line tools but I have a couple BB Simon's that I would like to avoid scratching while removing and reinstalling the spring bars. I figure most of it comes down to how careful one is during the process, but I was curious if you have any tips or recommendations for ideal spring bar tools, like the most important features or particular things to avoid etc. TY!
Extremely useful...thanks! 👍
This was very helpful - thank you! :)
Thank you I got the answer I was looking for.
I love your videos.THANKS !
Thank you.
As usual Marc excellent and informative video
Thank you!
Thank you!
Interesting! Thanks Marc.
Thank you for the video
Excellent video, thorough and detailed. Helped guide me through my band resize. Unfortunately I misplaced one of my clasp's spring bar pins. Where can you find a parts list to purchase a replacement. None of my local Seiko dealers carry the bars/pins in stock. For a SPB167J1.
Hey buddy awesome video! Thank you. Where can I buy the tool from to do the fitting?
good info thank you.
Hi, what’s the difference beteeen the big and the small fork? Di the bith have specific function?
Great video. I've changed spring bar held bands before but having trouble with the rubber strap on my Longines LungoMare. There are notches on the underside of the band to give access but the spring bar won't compress, I even bent the forked removal tool. Rubber strap has big cracks and about to break. Could I have corrosion inside the spring bar not allowing them to compress? Suggestions?
Thanks Mark!
Great video
How do you keep the spring bars from flying away? When I try to remove them sometimes they spring across the room.
Trying to figure out how to remove a marathon jsar bracelet... When the clasp is removed I don't see any spring bar in the back and when got the bracelet no spring bars were visible so not sure how they are secured other Than to say that they are very well secured. Amazing bracelet but would like to be able to swap it out for the weekend
i may be late but this is awesome video. I learned a lot.
Nice one Mark thanks.
Thank you for watching.
Seiko's kick arse. After all those years of hearing how size isn't important, how must my Tissot feel now, next to the big boy Seikos? Loving this series, learning so much. Regards.
Thank you for watching.
Hello, i'm a newbie for this spring bar. I want to ask : is the Seiko fat spring bar is water resist/stainless steel/ anti rust? because it made for diver isn't? :) and so...if i change my fat spring bar (i have SKX now) with third party spring bar...which have some shoulder like you show me in this video...is that shouldered spring bar match for diving?/anti rust?
And are scratches on watch luggage (because of scratched by tools while changing the strap, releasing the spring bar) make the stainless steel watch weak (possibility for rusting more easily) ?
Thank you so much...i really appreciate if you have time to answer my question :)
Marc, can you just replace the classic strap with quick release straps? are the sprinbars the same size?
Could you please do a video on bracelet re-sizing? I tried to adjust my Seiko monster bracelet my self and completely ruined it! thanks
Sure, great idea!
Thanks for the video Marc. Can you help me? What size spring bar do I need for a Seiko v657-0b20? I bought a 20mm but it's too long. Thank you.
thanks great content
Marc, I have a watch with a steel bracelet with pins similar to the Seiko 5 you showed at 11:15, with the pin holes visible on the outside of the lug. There is an end that shows the slightly concave end of the pin, and at the other end the pin is not visible. What is the correct way to remove these pins?
Thank you. One caveat. The original buckles often do not have deep enough holes to snap back in. This refers to the buckle, not the band. Third-party buckles are a really good idea so you don't waste an hour on a s--tty buckle. You can't know until you remove a buckle as to whether it's good enough.
They needn't be expensive. Barton is excellent! I have 3 Pebble Times, all with new bands and buckles. Well, 2½. I have to order one now.
Could you please do a video on how to reattach the Seiko Sarb033 end links to the lugs. Ive currently got a leather strap on the Sarb033 but want to put the factory bracelet back on for a change. I've found that trying to get the spring bars into the lug holes along with lining up the end link EXTREMELY difficult. Any help would be much appreciated!
Hi. I love your videos because they're so detailed. I need help with my Citizen AT8124 watch: I don't know if it'll take a nato/zulu strap, so I'm holding off on that purchase until I'm sure. Would you know? I can send you a picture of the back if it'll help... I'm gonna buy a tool to remove the bracelet once I'm sure. Thanks!
Could you please do a video on Timex Ironman's. A new springbar on it's own goes in in seconds with a springbar tool took me approx 20 seconds. With the band on it, it took 2.5 hours each side. I'd like to see what I'm doing wrong.
Thank you
Hi mark great video may i have the link to your store please
I tried this,but my ignition timing is still advanced. If I replace the spring bars will it alter the mixture? Watches were all lot easier before the introduction of Canbus .