HI! congratulations for the channel, I find it very useful for the maintenance of my 650 Re, can you tell me what type of grease 22:20 you use for the left crankcase plug o-ring? Thank you. Greetings from Italy 🇮🇹
The bike looks great! How did you get a mirror shine on the engine covers and how did you buff the throttle body covers? I use either Autosol metal polish or green compound on the engine covers. For the throttle body covers, I used both with a felt buffing wheel on an angle grinder. Mine are shiny but not as much as yours. Or maybe it's just the video.
Thanks for watching and contributing to our channel. For both the throttle body covers and the Engine cases I used wet sandpaper first with I think 2500 grit then Mothers metal polish and Autosol with a foam pad on a drill. The camera does make it look better than it actually is, but I do give it a little polish everytime I wash it.
@@losttogether4ever Ah, I did buy some foam pads with a velcro wheel that attaches to a drill but never used them. I'll keep your tips in mind when next I polish the engine covers.
Thanks for watching and being a part of our channel, that is a C-Racer Fairing, they are made in Greece, here's a link to our video, I'm very happy with the fairing it works well and looks great, C-racer is a great company to deal with as well!! ruclips.net/video/C548J1jb1Is/видео.html
Hello, Thanks for watching and being a part of our channel. The actual springs came black from the factory, the resevoirs were gold and then I vinyl wrapped them as I show in the video. Hope this answers your question if not please clarify.
That's a C-racer fairing , the link to the installation video is here. ruclips.net/video/C548J1jb1Is/видео.html Thanks for watching and being a part of our channel.
@@losttogether4everThose wire wheels look good, don't they? Even I am torn between a tubeless conversion and the new cast alloy wheels. Mine is an Interceptor in the Mark 2 chrome colourway with the same seat as yours and a red cowl.
I booked mine yesterday 🤗 and I have been following you for mods and taking care of the motorcycle. Thank you for the videos ❤❤❤
Thank You for the kind comments!! Ride safe!
The bikes looking fabulous 👍🏻😎
Thanks!! Doing mods is addictive!! Can't get enough!
Damn man, everything is looking real nice
Thanks for your support!!
HI! congratulations for the channel, I find it very useful for the maintenance of my 650 Re, can you tell me what type of grease 22:20 you use for the left crankcase plug o-ring? Thank you. Greetings from Italy 🇮🇹
Thanks for watching glad we can be helpful!! The grease is just a general purpose grease available at automotive parts stores here in Canada.
@@losttogether4ever grazie! 👍🥂
The bike looks great! How did you get a mirror shine on the engine covers and how did you buff the throttle body covers? I use either Autosol metal polish or green compound on the engine covers. For the throttle body covers, I used both with a felt buffing wheel on an angle grinder. Mine are shiny but not as much as yours. Or maybe it's just the video.
Thanks for watching and contributing to our channel. For both the throttle body covers and the Engine cases I used wet sandpaper first with I think 2500 grit then Mothers metal polish and Autosol with a foam pad on a drill. The camera does make it look better than it actually is, but I do give it a little polish everytime I wash it.
@@losttogether4ever Ah, I did buy some foam pads with a velcro wheel that attaches to a drill but never used them. I'll keep your tips in mind when next I polish the engine covers.
Dear sir, what kind of a fairing is this and where did you get it? Thanks!
Thanks for watching and being a part of our channel, that is a C-Racer Fairing, they are made in Greece, here's a link to our video, I'm very happy with the fairing it works well and looks great, C-racer is a great company to deal with as well!! ruclips.net/video/C548J1jb1Is/видео.html
The jb weld for the kickstand is still holding?
Yes it is, seems good and solid still. Thanks for being a part of our channel!!
Hi, How did you make the springs black ? please do reply!:) thanks mate
Hello, Thanks for watching and being a part of our channel. The actual springs came black from the factory, the resevoirs were gold and then I vinyl wrapped them as I show in the video. Hope this answers your question if not please clarify.
@@losttogether4ever thats really strange my bike came with silver springs! what year make is your bike ?
Thank you for the reply!
Mine's a 2021, I think every 650 twin I've seen in Canada or the US has black springs, I didn't know they had silver springs.
Where is the front wind fender from
That's a C-racer fairing , the link to the installation video is here. ruclips.net/video/C548J1jb1Is/видео.html Thanks for watching and being a part of our channel.
👍👍👍👍👍
Thanks Pradeep!!
Thanks for showing us some methods , but to me none of the mods except the side stand one appealed , or worse to be honest , sorry !
Fair enough! Thanks for watching.
if u keep riding on those tires u can taste the roads
I know!! New tires are on order, coming up will be a tubeless conversion and new tires!!
@@losttogether4ever company launch alloy wheels don't waste money in tubeless conversion stuffs 👍
But I love the spoked wheels, I wish they produced tubeless spoked wheels.
@@losttogether4everThose wire wheels look good, don't they? Even I am torn between a tubeless conversion and the new cast alloy wheels. Mine is an Interceptor in the Mark 2 chrome colourway with the same seat as yours and a red cowl.