Just watched your video for the third time and I'm pretty confident that I can do the install. Can barely wait 'til my stuff from MoonsMC gets here. Also ordered the lay down license plate bracket. Hate to be such a copycat but the rear of your bike looks so good that I couldn't help myself.
I did the exact same thing. Ordered instantly and felt like a copy cat lmaooo but think about it like this how many dynas you see around you feel me ? Lol 🤘🏻
I installed the Moons tail light on my FXLRS last season. I also put the Moons black bezel on it so the whole thing is black. Love the look of it. It doesn't stick out like the stock tail light. Guerrilla Cables makes an extension cable that makes the install a lot easier.
I got the cable from Moons but I know Guerrilla has a good one too! Do you have a 2020? I was under the impression the bezel doesn't fit the newer years?
@@Kingepticon I’ll have to check it out, maybe since I bought mine they updated it! I know a lot of guys who said it didn’t fit the 2020 - I keep putting off painting mine hoping to just get the bezel lol! Thanks!
@@Magnus0311 Now I need a cover for where the old rear turn signals were. Maybe the leather pros attachment go where the signals were and I don't need the cover.
Heyyy love the video thanks a million. Ima little confused so im doing the same thing you did which i just bought the moons light do i need a cable if im removing the side lights ? And the block off aswell?
I have one also....super bright but sometimes a bit confusing for drivers behind you....when brake and signal lights are on...it's a lot going on in a small space so keep and eye on drivers behind you....make sure they know your intentions to turn. :)
hello, just ran across your channel great job looks good to rode today it got up to 62 here at myrtle beach sc keep up the good work be safe out there,
I got pulled over year ago here in SoCal for having intergrated tailight.... I definitely need to go back to this set up bc of leatherpro bags. Sometime it sucks riding in California especially around where I live....
I put in an integrated turnsignal on my Yamaha FZ07 about three years ago and so far so good. I am in NorCal. I have found myself right in front of cops occasionally and no problems so far. Knock on wood. I actually tested my luck, I switched lanes legally with CHP approaching, left half of my taillight flashing. He followed behind for a short distance, then he moved to the left lane and took off. Does this validate that I'm ok with this setup? Not really, but I felt good about it.
@@surferdude642 the law is bit strict here in SoCal especially in beach cities... I ordered my Alloy Arts Struts lights the other day so I can accommodate my LP bags... I am good now so far!!!
Really slick upgrade. Very smooth. See you have the classic Harbor Freight Lift. I put a hand ratcheting Harbor Freight winch on the front of mine. My wife cranks me (the bike) right up on. (when bike won't run). Good vid., admire your wrenching skills.
Don't forget to buy the extension cable from Guerilla Cables. Makes the install that much easier. Moons also sell a black bezel if you don't like the stock chrome bezel.
Did u replace an LED tail light with another LED light, or did u replace a stock bulb light with an LED? And if so did u have to add a resistor or load equalizer to make it work?
That was most helpful.👍👋👋. I have an All in One Tail Light on my Softail but in the UK turn signals have to be a certain distance apart by law so now i have to try & undo 19yr old rusty nuts & bolts & re-route my cables. Wish me luck. 😅
Awesome vid. Btw, which moonsmc wire harness you use? I'm thinking about getting the same tail light but couldn't find the wire extension. Any suggestions??
Did you fix the hyper flash on the dash? I watched this video a few time before installing mine and never noticed the hyper flash on the dash until after I installed mine.
Some LRS videos show their rear turn signals as plug n play LED's. My 2021 LRS has plug n play in the front but not the rear. I really like the front LED from Harley because when running, they are a bright white, which is what I want in the rear. Is there a conversion kit to convert the rear to plug n play?
@@simonhouel1984 I have heard some people get away with them and others say absolutely don’t fit - I bought spray paint so I think I’m gonna try that and hopefully not mess it up too bad 🤣
Just installed mine on my low rider s...only thing is the damn damn hyper flash on module on the bike. I saw you have it too. Did you install an equalizer yet?
Nope! There are some tricks - turning it on and off with flashers etc. (Turn ign on, turn on hazards, ign off, hazards will do a different flash when ready, ign on, turn off hazards - or something to that effect anyway!)
How did you fix the hyperflash issue on the Digital Guage. The signals flash normal at the Taillight but, when you look down at the Guage it is hyperflashing?
I Have a 2021 lowrider s. I ordered the black tail light frame and the V3 and the electrical harness. The black frame doesn’t have the exact shape to go to the fender and the moons tail light doesn’t mold correctly to the stock chrome frame (since I couldn’t install the black) the two small black screws that secure the light won’t go in. It’s either the left one does or the right one does . It just seems the light doesn’t match the frame exactly and has created nothing but a headache for me. I’m contacting moon to see what’s up
Definitely contact them - they are really helpful! At the time of me making this, the black bezel did not fit the new Low Rider - just older models - that's why I didn't get it - but that could have changed! I'm sure they will be able to help you!
Heather, I have been looking for a course on basic maintenance and common roadside repairs. I’ve asked AD Farrow HD if the offer anything-no. I have worked on cars and small engines, but never a motorcycle. It would be nice to be a little more “fluent” in troubleshooting and maintenance. Love your shop videos, thought maybe you could help or point me in the right direction.
I haven't run into any specific classes - but I do know that Fix My Hog has a ton of videos on maintenance and changing out parts - also at some events I often see people hold classes on basic maintenance so keep your eyes open for that (local group meetups, or bigger weekend events sometimes have people who do these). If I hear of anything else I will definitely post it!
Everything is great but the hole leftover after you take out your old rear turn signals. It looks really bad. Maybe the hardware for the leather pros 3 will hide it
@@jaytouvelle2359 Ahh, I don't think he does chrome. You don't NEED it - but I don't like leaving anything open like that. I believe you can get them on Revzilla or a site similar in Chrome.
Check out these teeny tiny rear signals I think I wanna get instead of those block offs. These will add more signal flash for the rear, hardly noticing there even there unless they're lit up and they're so small they may not interfere with your saddle bags. www.kuryakyn.com/products/6148/kuryakyn-by-kellermann-atto-collection
Just watched your video for the third time and I'm pretty confident that I can do the install. Can barely wait 'til my stuff from MoonsMC gets here. Also ordered the lay down license plate bracket. Hate to be such a copycat but the rear of your bike looks so good that I couldn't help myself.
William Beebe Take your time and you’ll be fine!!! Excited for you, let me know how it turns out!!
@@MotoBlonde Will do.
I did the exact same thing. Ordered instantly and felt like a copy cat lmaooo but think about it like this how many dynas you see around you feel me ? Lol 🤘🏻
I installed the Moons tail light on my FXLRS last season. I also put the Moons black bezel on it so the whole thing is black. Love the look of it. It doesn't stick out like the stock tail light. Guerrilla Cables makes an extension cable that makes the install a lot easier.
I got the cable from Moons but I know Guerrilla has a good one too! Do you have a 2020? I was under the impression the bezel doesn't fit the newer years?
@@MotoBlonde Yeah, 2020 FXLRS. Black bezel was 100% plug and play.
@@Kingepticon I’ll have to check it out, maybe since I bought mine they updated it! I know a lot of guys who said it didn’t fit the 2020 - I keep putting off painting mine hoping to just get the bezel lol! Thanks!
Thinking about getting this too since I have to relocate or remove my rear signals for the leather pros bags. Good video.
Doing the same as you
@@jaytouvelle2359 I did it man. It was much easier than I thought. Go for it. It’s awesome.
@@Magnus0311 Now I need a cover for where the old rear turn signals were. Maybe the leather pros attachment go where the signals were and I don't need the cover.
Hairycustoms.com he’s great!
New taillight makes a big difference, looks great, nice work.
Thank you!
Thanks Moon told me it would be a lot easier than reality of this video. Great job Can't wait to put mine on today. Your video really helped.
Glad it helped!! Definitely can be even easier if you don't delete the signals!! Just plug and play!
Heyyy love the video thanks a million. Ima little confused so im doing the same thing you did which i just bought the moons light do i need a cable if im removing the side lights ? And the block off aswell?
By the way i have a dyna lowrider 2006 whats that cable called on moons website
I have one also....super bright but sometimes a bit confusing for drivers behind you....when brake and signal lights are on...it's a lot going on in a small space so keep and eye on drivers behind you....make sure they know your intentions to turn. :)
Thanks for the tip!
I think the V3 release of the MoonsMC tail light corrected that situation.
Thank you for sharing this video on how to install this LED tail lights.
hello, just ran across your channel great job looks good to rode today it got up to 62 here at myrtle beach sc keep up the good work be safe out there,
Perfect weather! Enjoy! Thanks for watching!
Awesome video, I’m doing this tonight on my 2022 FXLRS. Thank you for the vid!
Great video. Can I ask why you changed the wiring harness? Was that necessary?
Yep taillight / blinker combo looking much better now 👍
Thank you!
Lov the video but how did you get the cover for old signal mounting
It is linked in the description by Hairy Customs.
Strobe feature is great, nice work on the install!
Thank you!
Commendable organization and tool handling.
I got pulled over year ago here in SoCal for having intergrated tailight.... I definitely need to go back to this set up bc of leatherpro bags. Sometime it sucks riding in California especially around where I live....
So frustrating!
I put in an integrated turnsignal on my Yamaha FZ07 about three years ago and so far so good. I am in NorCal. I have found myself right in front of cops occasionally and no problems so far. Knock on wood. I actually tested my luck, I switched lanes legally with CHP approaching, left half of my taillight flashing. He followed behind for a short distance, then he moved to the left lane and took off. Does this validate that I'm ok with this setup? Not really, but I felt good about it.
@@surferdude642 the law is bit strict here in SoCal especially in beach cities... I ordered my Alloy Arts Struts lights the other day so I can accommodate my LP bags... I am good now so far!!!
i love the bagger behind ya!!
Thanks for the video! Gonna do this tomorrow I picked up the wiring harness for Black Friday
Awesome!
Really slick upgrade. Very smooth.
See you have the classic Harbor Freight Lift. I put a hand ratcheting Harbor Freight winch on the front of mine. My wife cranks me (the bike) right up on. (when bike won't run).
Good vid., admire your wrenching skills.
Thats a great idea! It's definitely narrow getting the baggers on it - but it works!
Thank you for posting this, definitely getting this for my Dyna
lo profile looks cooler for sure though I'd totally chop the fender and lose it all together and side mount the plate like the wideglides
When I first got the bike, I was gonna chop it and slam it to the tire and go a whole different way - but I decided to go full on Dyna Bro instead
Oh my I totally wish I would’ve seen this video before I cut harnesses and hard wired mine in. Didn’t even know they make harnesses for them
Good looking bike which model do you have? Not a big Harley fan but there a few models that I really like.
Thanks! 2020 Low Rider S
Well now I’m sold on the moons option. Looks exactly what I was looking for on my Fxlrs. Thanks for the good vid 🤟🏻
No problem! Thanks for watching!
Don't forget to buy the extension cable from Guerilla Cables. Makes the install that much easier. Moons also sell a black bezel if you don't like the stock chrome bezel.
looks awesome well done!
Looks great! Awesome detailed installation that will be helpful for anyone to follow. Good job! 👍🏻
Appreciate that!
Did u replace an LED tail light with another LED light, or did u replace a stock bulb light with an LED? And if so did u have to add a resistor or load equalizer to make it work?
That was most helpful.👍👋👋.
I have an All in One Tail Light on my Softail but in the UK turn signals have to be a certain distance apart by law so now i have to try & undo 19yr old rusty nuts & bolts & re-route my cables. Wish me luck. 😅
Did you like the Michelin Scorchers
My girl watched this with me... Even tho she was very sleepy. She says good job!
Thank you!!
Cool vid, very cool product
Awesome vid. Btw, which moonsmc wire harness you use? I'm thinking about getting the same tail light but couldn't find the wire extension. Any suggestions??
Thanks for watching! This is the one I bought from Moons - www.moonsmc.com/products/moonsmc-2018-2020-m8-softail-rear-fender-harness
Did you fix the hyper flash on the dash? I watched this video a few time before installing mine and never noticed the hyper flash on the dash until after I installed mine.
Will it light properly your lay down license plate?
Some LRS videos show their rear turn signals as plug n play LED's. My 2021 LRS has plug n play in the front but not the rear. I really like the front LED from Harley because when running, they are a bright white, which is what I want in the rear. Is there a conversion kit to convert the rear to plug n play?
Cool upgrade.
Looks awesome. You should have swapped out the tail light base from chrome to a black custom dynamics one at the same time
Definitely going to black that out in the future!
Nope !
MoonsMc and Custom Dynamics base plates do NOT fit the 2018+ Softails.
I tried my luck anyway ... and I regreted it.
@@simonhouel1984 I have heard some people get away with them and others say absolutely don’t fit - I bought spray paint so I think I’m gonna try that and hopefully not mess it up too bad 🤣
I'm very impressed with you
Are you getting the hyper flash on your gauge? Fast blinking on the gauge, but normal signal speed from the taillight?
How much were those Hairy Customs turn signal block off plates?
I can't remember exactly - a lot less than the big names though!
Im like you with lights! I love your hoodie!
Love the hoody
Thank you!
Guest using Locktite on all your fasteners so they don't loosen up after you are done.
How did you get the reflectors off without ruining the paint? 🥰
I have a video on how to remove them!
@@MotoBlonde I saw it thank you!!!!! 🥰🥰🥰 so awesome I love your stuff!
Dumb newbie question. I’m new to bikes, would I want to disconnect anything on the battery? Before messing with anything electrical?
Can you send me the link to the cap fullers when you take off the bullet blinkers
4:33 YYYAAAAASSSS
The taillight looks good. Nice it has the strobe feature built in. Great detail on the install. 🤙👊
SinisterClutch thank you! The strobe is definitely a plus, especially after removing the turn signals.
if you dont mind me asking, how much the turn signal block off plates cost ?
Sheldon Saenz check out hairycustoms.com - extremely reasonable!
Hey what motorcycle lift do you have
Merci pour le tutoriel ça m a bien servi
Thanks for watching!
Aaaahhhh lay down plate..gotta get me one off those!
Do it!
Did you get the hyperflash on your gauge with the turn signal? If so what load equalizer did you use? Thanks.
Curious if you figured this one out?
The wire harness that you cut for the turn signals at 5:50. If you wanted to use them again where would you buy a new harness at??
I’m sure you could get it from the dealer
great video! Cheers and thank you for this! ITS BRIGHT!!!
Thanks! Yeah it is!!
Just installed mine on my low rider s...only thing is the damn damn hyper flash on module on the bike. I saw you have it too. Did you install an equalizer yet?
Nope! There are some tricks - turning it on and off with flashers etc. (Turn ign on, turn on hazards, ign off, hazards will do a different flash when ready, ign on, turn off hazards - or something to that effect anyway!)
@@MotoBlonde did this work for you? I am also thinking of copying this. I love the clean blacked out look.
Again like the one you did with your moons headlight After you are done and it's altogether turn the lights on so people can see
Does Moons taillight comes with base gasket seal?
How did you fix the hyperflash issue on the Digital Guage. The signals flash normal at the Taillight but, when you look down at the Guage it is hyperflashing?
I Have a 2021 lowrider s. I ordered the black tail light frame and the V3 and the electrical harness. The black frame doesn’t have the exact shape to go to the fender and the moons tail light doesn’t mold correctly to the stock chrome frame (since I couldn’t install the black) the two small black screws that secure the light won’t go in. It’s either the left one does or the right one does . It just seems the light doesn’t match the frame exactly and has created nothing but a headache for me. I’m contacting moon to see what’s up
Definitely contact them - they are really helpful! At the time of me making this, the black bezel did not fit the new Low Rider - just older models - that's why I didn't get it - but that could have changed! I'm sure they will be able to help you!
great install
MarvelKid87 thank you!
Yes ma'am 👍
Should of got the black plate bezel to match the light
On the to-do list 🙌
Heather,
I have been looking for a course on basic maintenance and common roadside repairs. I’ve asked AD Farrow HD if the offer anything-no. I have worked on cars and small engines, but never a motorcycle. It would be nice to be a little more “fluent” in troubleshooting and maintenance.
Love your shop videos, thought maybe you could help or point me in the right direction.
I haven't run into any specific classes - but I do know that Fix My Hog has a ton of videos on maintenance and changing out parts - also at some events I often see people hold classes on basic maintenance so keep your eyes open for that (local group meetups, or bigger weekend events sometimes have people who do these). If I hear of anything else I will definitely post it!
Very good video thanks for sharing
how much was the wiring harness?
I don't recall the exact amount - it's on Moons website :)
Thats a kickass light. I wanna do the led and smoked lens conversion like u did. Also need a new seat, that factory joint is hot garbage.
Definitely hot garbage, lol! The light was a lot easier than I thought!
nice and clean,good job
Thanks for watching!
Haha do you ride you bike? It's so clean under your fender cheers thanks omg that's a great trail light.
LOL - It was fairly new when I installed it!
Great install video!
Thank you!
No gasket?
You make look easy. Get a custom seat screw 👌🏻🔥🇺🇸
I have one now! 😉
Very well done!
Thank you!
"whats up guys," "hey guys" you tubes mandatory opening line.
nice work.nice jeans
Good job!
Thanks!
“Im not going to do anything extra that I don’t have to do”
The exact reason I don’t let anyone else work on my bikes or vehicles lol
Keeping it stock is better for this one.!
Your so rad.
Everything is great but the hole leftover after you take out your old rear turn signals. It looks really bad. Maybe the hardware for the leather pros 3 will hide it
Check out hairycustoms.com - he makes block off plates - I have them on mine!
@@MotoBlonde does he have chrome and do i need it if I buy leather pro saddlebags
@@jaytouvelle2359 Ahh, I don't think he does chrome. You don't NEED it - but I don't like leaving anything open like that. I believe you can get them on Revzilla or a site similar in Chrome.
Did this install and noticed my turn signals within my tank gauge now blink really fast. Anyone else notice that??
LEDs on a bike are a worthy investment indeed. 🖖🏻👍🏻🏍🚐
Lmao!!! The thug life threw me off 🤣. I was like "what kind of sorcery is this?"
🤣🤣
Cool
I just installed a very similar light that only cost 50 on Amazon
Insulate that garage!🙂
oh we did!!
Don’t need to take the fender off to install
If I send you the money could you send me the moons mc with wiring I have same bike low rider s 2020 please .. love your video.
I don’t have any extra - but you can order from Moons!
@@MotoBlonde ok thank you ??
✌😘
Check out these teeny tiny rear signals I think I wanna get instead of those block offs.
These will add more signal flash for the rear, hardly noticing there even there unless they're lit up and they're so small they may not interfere with your saddle bags.
www.kuryakyn.com/products/6148/kuryakyn-by-kellermann-atto-collection
I almost did them!!! Love those!
@@MotoBlonde you should still do them, they are a nice small addition for that added signal alertness.
I hate the stock taillights and front lights. I bought some Kellermann Bullet taillights and they are infinitely better.
Your not even a blonde 😅
Is it really tight though? 🧐