the torpedo/bullet rear turn signals are nice because they protect your bike from damage in a low speed fall. The integration of the turn signals with the tail brake light results in loss of clear delineation between left and right signaling. It does clean up the bike a bit though, so I get it. I like the smoked out lenses and will probably do the same to my bike. I like the murdered out look you're doing it well. enjoyable content, as always.
Hairy customs or you can do “trackerdie” that website has some nice block off plates. You can get ones custom, chrome, or just plain black. I got mine from them for my 2020 Lowrider S and it definitely fills in that ugly gap.
I prefer the original, I thought about doing this to my low rider s but love the look of the bullet signals. I do think that this conversion looks very clean and do like it. great job and I am glad you removed the entire fender I always cringe when I see people do the flip up, (THE PAINT!!!)
Hey brother , did you change out the bezel with the circuit board or was that stock bezel ? Man my 2022 FXLRS doesn’t have slots on the board for turn signals ! Just found that out after ordering your same set up and taking off the fender , removing the signals and all that;,,, glad I didn’t cut the wires I’ll tell you what!
Hairy customs has the covers you need He has the ones to match your bike Check out moto blonde ‘s video She used them I ordered some my self for fxlr Definitely cheaper then other options out there
Could you have left the stock turned signals on the bike and utilize the turn signals in the moon's tail light at the same time or does one have to be eliminated
Did you clean the fender and re-apply double stick tape? I hope you did ... I had a wire drop once onto the wheel because the tape didn’t adhere well and it shredded the wire. Just a heads up
Bro, my buddy installed the same thing on his bike and he has a guy that gave him something to cover that hole where you took off the turn signal lights. I’ll find out where to get it and I’ll send you the info.
Hairy Customs can sell you the block off plates that match quite well.
the torpedo/bullet rear turn signals are nice because they protect your bike from damage in a low speed fall. The integration of the turn signals with the tail brake light results in loss of clear delineation between left and right signaling. It does clean up the bike a bit though, so I get it. I like the smoked out lenses and will probably do the same to my bike. I like the murdered out look you're doing it well. enjoyable content, as always.
Your right about that they do protect it in a fall. I’m going to be adding rear crash bars so I’ll be good ok that end if anything. Thanks bro 👍🏽
@@Marvelkid87 w/ the rear crash bars, really it is close to perfect. good on ya!
Jerry the man! Great when y’all link up! The bike is looking AMAZING 🤩
🤙🏽
Both bikes are coming out really clean 🧼
Thanks
Much respect to MK. I learn how to do a lot of things to my LRS because of MK.
Great job MK87, yo Jerry i thought that was you.
Nice clean look & the added safety with the strobe 👍🏾👍🏾
Just did this to my lower rider s last month. Looks so much better and Hairy Customs did a good job on the block off plates.
😳 that escalated quickly I saw the fender come off and woke right up like oh this is a serious thing 😂
If you go on hairy customs he makes black plugs for the 2 open holes where the turn signals were.
ill check that out right now thanks!
@@Marvelkid87 glad to help he does good work I ordered a bronze oil cooling screen for my 2020 low rider s from him.
Hairy customs or you can do “trackerdie” that website has some nice block off plates. You can get ones custom, chrome, or just plain black. I got mine from them for my 2020 Lowrider S and it definitely fills in that ugly gap.
@MarvelKid87
Yo what up bro! Great install man! Thanks for the videos. This is definitely on the list of modds! Stay safe 🙏
🤙🏽
@@Marvelkid87 just ordered this and it's coming tomorrow. 🙌 I also ordered the covers from Jeremy Rosse aka hairy customes
Nice job and great look!! It should had come with a small, tiny and smoked led repeater for both sides!! 😃 It would be killer!!
Good look for sure..I’ll be doing this
Thanks to you and Big Jer Loc!!
Good job !! Looks slick bro 👍deffo going to get mine sorted out soon
I prefer the original, I thought about doing this to my low rider s but love the look of the bullet signals. I do think that this conversion looks very clean and do like it. great job and I am glad you removed the entire fender I always cringe when I see people do the flip up, (THE PAINT!!!)
😂😂😂
That’s great stuff! I like that integrated brake light! Thanks!,
I put a Custom Dynamics tail light with the signals in it. But I like the factory signals going at the same time makes it safer Cars will see me.
Awesome video looks really nice
Thanks 🙏🏽
Nice vid thanks. What number plate holder is that?
great video bro looking forward to get one as well
Correct Hairy Customs in SD they sell block off pins to cover that open holes for your turn signal.
Hey brother , did you change out the bezel with the circuit board or was that stock bezel ? Man my 2022 FXLRS doesn’t have slots on the board for turn signals ! Just found that out after ordering your same set up and taking off the fender , removing the signals and all that;,,, glad I didn’t cut the wires I’ll tell you what!
Jerry the coolest white guy ever 😁
MK87 Looks nice!
Looks mean bro💯
Looks great!
Hairy customs has the covers you need
He has the ones to match your bike
Check out moto blonde ‘s video
She used them
I ordered some my self for fxlr
Definitely cheaper then other options out there
ill check it out now thanks
What about the holes left where the rear lights were removed from?
Looks nice !!! Lol I stripped 1 bolt doing this on my LRS 2021, the homie at the shop knocked it out for 20$ lol got it on tho
lol thats the worst
looks great man!!!
👌🏽
Nice looks dope bro!
Thanks bro ✊🏽
Could you have left the stock turned signals on the bike and utilize the turn signals in the moon's tail light at the same time or does one have to be eliminated
Looks good. Raffle off the old LED lights. Keep the original parts
Hey I was wondering if this would work for an 01 dyna low rider and if so where I could get it!
Did you clean the fender and re-apply double stick tape? I hope you did ... I had a wire drop once onto the wheel because the tape didn’t adhere well and it shredded the wire. Just a heads up
Hey I see that you put your original turn signals back on in a later video... Can I ask why?
Can I use the stock turn signals and moons mc turn headlight or no
Bro, my buddy installed the same thing on his bike and he has a guy that gave him something to cover that hole where you took off the turn signal lights. I’ll find out where to get it and I’ll send you the info.
What's your total cost into the bike now with purchase price?
Is this brighter then stock tail lights?
Do you have a link to the harness?
👍
I want you to turn on the LED LIGHT BAR this time
Can anyone tell me how to take the turn signal plugs out from under the brake light? I can’t seem to get the plug to disconnect 😞
You should be able to squeeze and press
Why is the brake light a strobe light
looks like you scratched your fender mate...