Making a 12" Figure Armature (the 3 minute armature)
HTML-код
- Опубликовано: 14 окт 2024
- The 3 minute armature, using a piece of A4 paper, 6ft (180cm) of thin aluminium armature wire you can make a simple scaled figure armature to 1/6th scale (12").
3.17mm Square Aluminium wire is used in this example, thinner gauges of steel galvanised or soft copper wires can be used.
With such a close link between the golden section and body proportions it is possible to scale armatures up or down using standard paper stock sizes like A3, A2, A1 etc. and using different gauges of wire accordingly.
Link to Aluminium Armature Wire
www.tiranti.co....
Thank you so much for posting...this is exactly what I needed to make a kitchen witch for our daughter. Short, sweet, for frills, just the basics!
This has been really helpful. About to make my first sculpture with this for my application for studying creative therapy!
ruclips.net/video/QO9e7zGbp-A/видео.html
I like the paper fold + drawing.
Great video. Love how you made this. Thanks so much for sharing!
Brilliant and simple - nice combination.
Next time use a darker writing implement, such as a "Sharpie", so we can clearly see the lines.
You have obviously done this a time or two. Lol. I followed along with your video and made an armature figure. However, it wasn't easy and I had to tie a few areas with wire because they kept sliding around. Thank you though for making this video and posting it here. I searched for a long time before I found a tutorial like this. No one has yet folded paper this way to show the correct measurements and THIS is very important. Thank you!!!!! :)))
Thank you so much this really helpful! (sorry bad english)
Why did I take so long to look for this! Thank you!
Your technic is best of all.
Congratulations from Argentina, very useful video!!!!! Bye and thank you!!
You make it look so easy xD
Thanks for the tutorial.
Great just what I was looking for you have been very helpful ☺️
This is actually a really great small scale armature!
Finaly!! I can make my own action figure!! Thx u the best!!
Very nice you are very strong
Could I use the wire to make an armature for a standing reborn doll?
Thank you so much! I'm so happy youtube is existing haha.
Awesome and informative video I seen alot of how to make an armature but yours is one of the best I really like that it is constructed out of a single piece of wire cool. Thanks for sharing the knowledge ✌️
thanks for helping me in completing my H.H.W
Shall certainly be using this . Thank you.
Is this also known a sculpture?
Fabulous, just the video I needed for polymer clay work! Thank you 😊
Que maravilla eres lo maximo me encanto tu trabajo
What wire is this? Aluminium? What it's thickness in gauge?
This is great, thank you.
What's the name of the material?
Brilliant! Exactly what I needed. Thanks so much :)
Now do I wanna spend more time in the interim fixing and save money.... just build great heads and hands or just get good armatures and be short that head/hand making money.... Nothing is really that much of a rush.... It is a balance.
This video might spur me to get more heavy gauge wire now that I think of it.
I would have found this more helpful if there were written verbal instructions to go with the visuals. I also found it difficult to see the paper template at first.
I've found the template really helpful, but find that after the first few sculpting steps, I get confused, especially when it's obscured by your hands.
I'll keep trying, this video was helpful. :)
if i where to create a smaller armature, should i use a smaller gauge?
What metal is the wire?
This video helped me a lot! Thank you soo much!
You are great this tutorial really help me alot 🖌🕉🖌❤🖒🖒🖒☺☺☺
Simple yet extremely helpful
Thank you
Wow .. you are ao creative thanks for helping ❤❤
That is so cool and so useful.
I'm just going to say it - that was bad ass!
What is the length of the wire you begin with?
He/she said 6 feet.
Sherri Callahan sm pnch
Finding it hard to see the pencil template, would be better in felt or have a template attached. Apart from that its great, the tutorial is really useful for molding human form xXx
Muito obrigado por este artigo que me ajudou
Marvelous!!
Very nice!
How do you do the hands though?
Awesome! Very helpful👍🏼
What kind of a wire is it
Bendy kind.
This is very good and simple it's creativity he had he is very good on this thank you for your video i make my skeleton!!
Buenísimo y facilícimo. Perfecto
excelente👏👏👏
Thank you
El mejor vídeo q vi. 💕
xd
Im from indonesian and i like this vidio
amei é muito maravilhoso,estou aprendendo a fazer. obrigado
Keren mantap banget bikinnya akhirnya hampir jadi
wow that is easy .cool.and not xpansive thnxxx
Wire name
Wouldn't it be better to try for the proportions in Da Vinci's Virtruvian Man?
🙏🏽
Thank u so much...🙏
Thank You Very Much for sharing❤️🌷
How add nike gear on it
It's really good
Making very good
Is it just me? I can’t see what was drawn on the paper 🤓
She drew a very very simplified skull figure using the scale she made by folding the paper, she then recreated the same figure with the wires !
You're correct - should have used a Sharpie.
Good video, but its frustrating when people don't talk for their instruction videos.
There was a huge shine on the paper when you were making the sketch. Otherwise this was very helpful.
Tank
Thanks a lot,a great help 4 my asgment 😆
Love this technique
Holy cow i found this skeleton 7 years ago
I love it! Thank you!
Any students preparing for NID, UCEED here. :)
Refreshing...ty
That was hecka cool!!
Thank you, 👍
wow so coooooooooooooooooooool!
Beautiful
Thank you 😊
Amazing
Thank you
looked this up cuz im making a coraline doll of myself...
Ahahah me toooo!!!🥰🥰
😮
Which wire u used.???
Too bad you can't see what you drew on the paper.
Super
Muito lindo, foi perfec
I really need to build up my finger strength 😅
Tarekkk Sisss!
Bravo!
Stop-motion armature kit: amzn.to/2Nq4pcV
👏👏👋👍👍👍
Great
god veri god
vois wowis
جميل
Bang buayin donh lima puluh ribu 1
The three minute armature but the 4:10 video
Nooo...not music....
Èw
Thanks
Beautiful