I love your videos - you explain it so well. I've just made some of the tools you showed us how to make in another video so now it's time to start sculpting. :)
Having dabbled a bit with ADC, I know what you mean by "the weight of the clay" when dry. It's what's between the armature and the clay that next matters. Like foil and ???
Hi, I'd like to try using clay for miniatures, action figures, etc., I see many people using baking clay but I've seen that there is also air-dried clay. You can use this air-dried one. so you don't have to try your hand at cooking =).? If it can be colored normally with acrylic colors and washes.? Thank you
Really helpful tutorial but one question-so that big metal end to the stand is just inside your sculpture forever? Doesn’t that look wonky? Or do you have to make the sculpture really big to fit around it?
Hi Miriam 😊 yeah it stays inside - but will be completely hidden by clay (except the hole where you connect it to the stand, which you would block out as the very last thing) . Indeed this armature is for quite a large sculpture, but you can get the pipe fittings in many different sizes so you would just need a smaller pipe system for a smaller figure. Hope that answers your question? 😊
Thank you for this very useful tutorial but I need another tutorial about how to remove the armature from the sculpture. If you make a video about that I would be appreciated that thank you in advance.
She's a New Zealander. There's a handy website that shows how words are pronounced all over the world. Pronouncewiki.com and would you believe, about half the English speaking world pronounce dandelion Dan Dee Lee On instead of Dandy Lion. Whether it's Hong Kong or Calcutta or Belfast, or anywhere, there are differences. Check it out, it's a blest, uh, blast. 😊
Just a few simple ingredients *pulls out a nuclear reactor*
It is a simple ingredient I use it in my food every time
Ha😂😂😂😂😂
I laughed literally when that happened
THANK YOU!!! I found your video about creating the Armature. I did not even know what it was named. The drill twist is so easy .
Best tutorial I've seen . Thank you!
I've been wanting to get into sculpting for years, your videos have been very helpful, love your content 🤘
I just recieved wire I ordered. I was just about to look for a tutorial for a tiny armature and then you appear with this new video. Thaaaaaaaanks!!
The algorithm’s “Reading Minds” Update is still in Beta Testing.
My mind started to explode when she stuck those two wires into the cordless drill. WIZARD ! ! !
thanks for sharing
this was super helpful thank u!
Thank for showing what you do! I have a question: after you’ve finished sculpting, how do you remove your sculpture from the stand?
Thank you Sofia ! I’m going to start sculpting soon. Please don’t stop your informative videos !
Fabulous!! I am really wanting to try my hand at sculpturing like this. Great tutorial on the basic of how to make an armature. Thank you!
Thank you for sharing tips
Where can you get the diagram of the human skeleton showing the front and side views?
This loud background music is horrendous and totally ruins the video. What a shame.
I love your videos - you explain it so well. I've just made some of the tools you showed us how to make in another video so now it's time to start sculpting. :)
Woohoo
Hi Sofia I can not open any of these links. Would you fix it please?
girl how is this easy u bought the whole damn store and a map
Is it ok to use skinny wire and twist it together as a thick frame?
That's so great. good technique. I also do art like you
Can you put zip ties in the Owen ?
شكرا لك عاوز كتاب عن النحت
but how you bring it of from your frame?
Gracias por tu aporte y sugerencias, me encanta tu trabajo 😊
Thank you so much 🙏🙏🙏🌟❤️☀️❤️🔥
Having dabbled a bit with ADC, I know what you mean by "the weight of the clay" when dry. It's what's between the armature and the clay that next matters. Like foil and ???
Hi, I'd like to try using clay for miniatures, action figures, etc., I see many people using baking clay but I've seen that there is also air-dried clay. You can use this air-dried one. so you don't have to try your hand at cooking =).? If it can be colored normally with acrylic colors and washes.? Thank you
Yaaaaaassssssss!!!! Just what I needed!! Super useful! Thank youuuuuuuu!!!! 👍😃👍
at minute 3:08. how to remove that armor support when you have finished your sculpture
You can’t
Really helpful tutorial but one question-so that big metal end to the stand is just inside your sculpture forever? Doesn’t that look wonky? Or do you have to make the sculpture really big to fit around it?
Hi Miriam 😊 yeah it stays inside - but will be completely hidden by clay (except the hole where you connect it to the stand, which you would block out as the very last thing) . Indeed this armature is for quite a large sculpture, but you can get the pipe fittings in many different sizes so you would just need a smaller pipe system for a smaller figure. Hope that answers your question? 😊
You're beautiful ♥️
this was awsome thanks
Exactly what i needed, informative and to the point - Thanks!
youtube.com/@clayart23
Clay Art RUclips Channel Link 👆
OMG, the drill tip is so smart! I teach Art and my upper level students are doing this right now. I have tools in class. SO DOING THIS.
great tutorial! I didn't had any access to Knead it! can I still put my armature in the oven if the aluminum foil is in contact with my cable ties?
How much wire did you use roughly? Inches, yards?
Thanks 🙏
Great video! I am gonna try this out soon :-)
Hallo sofie, cok ögretici anlattigin icin tesekkür ederim.
Hey ♥️♥️♥️
Can I use this to add clay and use it in stop motion?
Thank you 😘
THX!!
Can this stuff be cooked in a kiln
Very informative and great ideas
Another great one! Thank you!
Thank you for this tutorial 👍 It's really helpful idea 🙂
good. subbed.
again, WOW! Great tutorial!
Thankyou - some great ideas there!
How to get material to
Thank you for this very useful tutorial but I need another tutorial about how to remove the armature from the sculpture. If you make a video about that I would be appreciated that thank you in advance.
the armature stays inside the sculpture. Like a skeleton.
l
@@danperry3116 thanks for the answer but i didn't mean whole armature i mean stant that holds armature...
Great stuff 💜
Girl, you think this is easy?
great tips, thank you
Thank you, this is great
Very wonderful
I love you.
Waw❤
tenks for the tips
🤟
Awesome video, well done👍🏼
Thanks for sharing!
lmao na
Ear dry clay.
She's a New Zealander. There's a handy website that shows how words are pronounced all over the world. Pronouncewiki.com and would you believe, about half the English speaking world pronounce dandelion Dan Dee Lee On instead of Dandy Lion. Whether it's Hong Kong or Calcutta or Belfast, or anywhere, there are differences. Check it out, it's a blest, uh, blast. 😊
😍