This is a tutorial, not the useless ones I have seeing on other channels . Thank you for taking your time to explain. Much appreciated, stay safe out there.
I work In the fiberglass tank winding industry been watching videos like this and lichtenberg burning for about a day is giving me alot of ideas man keep it up👍👍👍
As I was watching the video and seen all the time and effort you put into that table I said no way it's not worth it.. At the end I was wrong. Its absolutely amazing and will last forever.
THanks! That's how I feel about it too. The first resin project I did I told myself I'd never do one again, then after the pour and cure.. I was hooked.
Very nice work. I agree with your thoughts on the fasteners on the top. When someone spends a couple of thousand dollars they expect the little touches. Totally agree. Beautiful table.
My wife used a plane for the first time last week we needed to customize a door and she did amazing she starting to get into wood working even though she is allergic to wood dust and I suggested planeing instead of sanding and she loved it I got her some respirators and stuff so the dust wouldn't harm her if she wanted to sand and stuff she also is wanting me to teach her to weld so will be doing that also
@@YouCanMakeThisToo but that's why they make respirators and safety equipment to protect ya I did steer her tords last dusty tools but she will get there
The problem with people doing pours now days is they think its all about having the pretty resin in there and the wood is just a side dish. You need to make the wood look natural like it grew into the resin. All these square cuts just shows that you threw the wood in and made the piece all about the resin. Appreciate the effort put into the vid mate cheers.
I think a problem with society today is an acceptance for stating personal valuations as objective facts. Your opinion on how it should be done is just as valid as my thoughts on trying to keep the wood as close to how it came to me as possible. It’s part of the story of how those pieces went from a tree into the table. Walnut has strong contrast between the heart wood and sapwood. To me shaping a cut of heartwood to look like live edge screams unnatural. It may be a less popular view, but regardless that’s my taste and style.
Out of curiousity, why did you choose to not remove the bark from the boards in this build? I have seen a lot of other videos that say it can cause for issues later. Is there a way to seal the wood with the bark to alleviate this issue down the road as I would love to make a build where the bark stays on for aesthetic purposes
New to your channel. Greatly enjoy building wood pieces. I'm wanting to get into epoxy building. Your knowledge. Is definitely helpful. Only seen this video do far. But. Your detail to not only your work. But to letting your watchers know what your doing and the tools and materials you use. Is simply amazing. Thank you for making this
Anytime! My style has changed a little since this video, but I still try to add all the same value and more. Thanks for the valuable and specific feedback
@@YouCanMakeThisToo Anytime. If you don't mind me asking where Are you located. When I came across this video. It had a lil red memphis beside it when I clicked
you're an awesome carpenter. what you did with that stain was just amazing. the wood just became something else when you put that on. The color contrast is really nice also. Good job.
This is really nice, and inspiring. Learned a lot from your detailed explanations. I would recommend for the LEDs to use a diffuser in the future. They fit inside and makes it a smooth light and less concentrated per diode, and can mount easier!
I use a plastic spoon and windex for my caulk shaping. The windex keeps the spoon from sticking to the silicone while smoothing it effortlessly. Some dish detergent and warm water can also be used...just dip the spoon and then smooth away!
Putting the led strips on the frame also gives a beautiful cast off I put led strips on my tv stand its steel and wood and best casting of the leds light was on frame facing each other gives this beautiful glow compared to direct light
Man, after seeing your video on calculating epoxy, I was hoping that there would be one of the pour and end result! You did not disappoint my friend!! Very well done 👍🏼
Hi Caleb. Incredible video! I’m completely inspired even though I don’t have a workshop with every thing in it, I can dream. I’m new to resin art and hope to make a similar table at some point. You’ve definitely got a new subscriber here. Thank You so much for sharing your vast knowledge and great skills. This video is just amazing!
I used to build the plugs and molds used in the construction of fiberglass boats. A few suggestions for you are to apply the wax directly to the melamine. It should release quite well. Also, there is a product called wax fillet strips that comes in varied radius sizes and is applied using a heated wax fillet tool. The finished product is nearly perfect and it doesn't require any drying time. It can be applied prior to waxing and then the paste wax is applied over it. Nice job on the table. I admire your attention to detail.
YOU ARE A GENIUS! I have been looking for better ways to attach boards to send through the planer never heard or thought of using a hot glue gun, your sir have just changed my life!
I really like how, at the END of the video you say..."please like and subscribe if you think I have earned it". It's a pet peeve of mine when someone asks you, right off the bat, to like and subscribe......before you have even seen the video. I know no one does but it just bothers me. So....good job!
If you think I had every tool then you should see my shop now. PS: I got those tools by building stuff with way less tools and then reinvesting the profits... also, I didn't have other hobbies or interests.
@@YouCanMakeThisToo I didn't mean that comment in a a**hole way. I know most people do earn everything they have whether it be tools, cars, ect. Usually the ones born with a silver spoon are too lazy or not interested in working on projects and would rather just buy something pre made or have someone do it for them. But I can tell you work hard and you love what you do and you're successful with it so you deserve what you have. People who put others down or feel sorry for themselves have to realize that life is full of choices. But I enjoy your videos. sorry for the confusion. Cheers
@@trevorjames5493 No worries brother, and sorry if I came on defensive. I get a lot of comments from folks that do seem to think a shop was just handed to me and sometimes I jump to reading things that way too quickly. I super appreciate your viewership and engagement - and you are right. It is a lot more fun when you have the tools that make the job easier and you can focus on the creativity and not trying to work around your toolset.
Thank you for this informative video. Can I use a clear epoxy (without pigments) to fill the gaps and also cover the surfaces? In other words, can I submerge the wood pieces into the clear epoxy so the epoxy filles the gaps between the pieces and protects the surfaces?
Table looks great. Lights are a nice touch. Have you tried maybe some sort of diffuser covering to give the lighting a fuller look rather than separated LED's? Seeing it got me thinking about ceiling lights and how the glass / plastic covering acts as a diffuser while spreading the light out instead of concentrating it to one spot. I'll be subscribing. I always enjoy the patience of a skilled craftsman. Thanks for your effort in creating quality content.
Very nice work! My question is concerning the LED's, & their placement. Is there a reason why you didn't place the LED's under the edges of the pieces of wood to give the blue epoxy more light, or shine through? It just seemed like certain areas on the table were darker than others. Just curious if there was a specific reason doing it that way. Thanks! Keep up the great work!👍
@@ogearbox6132 the nice house probably has a lot to do with Mexicans. The nice car probably has a lot to do with the Chinese... And the nice job probably sells a lot to people who are not only white.... Of course that's just a guess
Hey bud great video and great table. A lil tip though. When you aren't "good" at welding. Learn going "uphill" by making sure u are pushing your puddle. This will give you a much better weld in the future
This blue metal colour is gorgeous 😍 next time seal the bark before pouring epoxy otherwise it’s gonna be weak. FYI just bought the Ortur laser can’t wait to receive it 😊
So much amazing technique in this video and skill and the little jokes like mixing and mixing makes it fun and entertaining get so much enjoyment out of watching you work in your element is just amazing bro
@@YouCanMakeThisToo you have grown alot in last few months and I agree your using your voice more and we get to see the jokes and the fun side of you and it's making the content even better and your honing them skills
I was always told to remove bark and loose dead segments as the epoxy will come loose after a while Have you ever had this happen, I'm guessing not as you wouldn't still do it that way
Nope. I take a stiff brush and then light mallet to the bark sometimes. Anything that comes loose is gone. If it stays, it’s good. A good technique is to put penetrating epoxy in any bark you wanna keep. Also depends on the base. This one is supported all the way around so there isn’t much stress on that joint. If it was going on say hair pin legs.. I’d have done something different. Another technique is to put lag bolts or dowels through the bark into the wood for the epoxy to grab onto. If the epoxy isn’t clear.
Wow, very interesting concept, it turned out beautiful, your layout caught my eye right off and the blue added more beauty. First time viewer and I'm impressed so I subscribed. Thank you for sharing..
Absolutely beautiful table! The table looks like a southwestern desert painting! That color is just out of this world! I'm going to incorporate your techniques on my next pieces i make with old reclaimed wood! Thanks for sharing!
I loved everything about this video! The up close and personal shots were my favorite as you already know! And the fact that Wes knew where you two was going was so cute. The jokes you threw in where a nice touch too! I cant wait until you upload more videos. Please keep up the amazing work!
Right loved it too this takes so much work. 😂hopefully he can hire a editor one day when he becomes. Famous man with a sock. You watch. That sock we better start to make a concept so we 2 can be RICH LOL
Great video sir and wonderful results with all the professional techniques almost suggests that this DIY project is extraordinarily expensive for a retired income tools are out of my range. Thanks for all the show and tell. Ass whole.
It can be.. it's also possible to buy the small wood pieces that are already planed - or find a friend or woodwork shop that'll flatten them for free or a small fee. Can also do all the flattening with a router sled. Another beautiful thing of hobby woodworking is upgrades can be self funding from selling projects.
Wow! Beautiful. The Led lighting just added bumped it to a whole new level. You are very talented and your explanation of everything was amazing. I have a stationary built-in bar top that is 5' X 13'. It is stained wood that was very nice 13 years ago when my 12 year old son helped me make it, but has seen some major wear and tear since then, of course I could just sand and stain...boring... I think I can use some of your ideas to renew it. I just love the resin, but I was wondering about a pour that didn't flip??? Being built in; I would basically have to pour it where it sits.
I've used Tyvek tape as well as Apel silicone mold release. Both work great. The Apel you spray directly onto the Melamine. Beautiful table, love your work
Shop sock... classic! That earned a hit on the ol' subscribe button from me. This was my first video of yours, looks like I've got some catching up to do!
Great video and learned a few things. Must have a shop sock for when things get messy and two epoxy does not stick to dry erase boards. Thanks for sharing.
Nice...I have seen in other videos...they claned the bark and 'sealed' with epoxy...so leaving the bark on turned out pretty cool too...I am just learning. Finished my first in place kitchen tops. I AM HOOKED!! Found my niche..and want more!!!
Nice video!! I found it to be really informative. I'm glad to see that you pretty much do everything yourself. I struggle with that as well. I feel like a fraud if I use anyone else's work to finish one of my projects. I have two epoxy flag videos I'm working. Thanks for the info and nice work!
When it comes to my projects, I do, as that's part of my brand. In my business.. I do my best to find good people who can do everything that I don't need to do, so I can focus on what only I can do.
I don't think there is a finish that totally prevents moisture exchange. Totally encapsulating in resin is probably the closest thing... But short of that the trick is just finish all sides equally so moisture exchange is the same all the way around the piece.
I use General Finishes... 2-3 coats of Sanding Sealer, sanding between coats, and then 2-3 coats of the 2 part Conversion Varnish and Catalyst, also sanding between coats. It will not leave any rings from drinks or show any kind of liquid spills... it will just bead up and you can wipe it off. It is suggested for spray application but I use a foam roller and make sure there are no lines from the roller, works great.
I would love to see a video on what materials you can use Epoxy on. I have never used Epoxy and want to see the best way to make a project and just use Epoxy or Resin to make a shiny waterproof finish. Ty 🤗
Everything was on point, but why oh why in the world did you use a straight line (edged) cut wood in the middle of the table joining the epoxy? They destroyed the natural organic look of the table. Very bad choice of woodcut.
A little trick I’ve used for years is Vaseline, you can used plan wood for your mold, just grease it good with the Vaseline and your epoxy will never stick to it, you can also use this on the back of projects that you are going to pour without a mold to easily remove drips, they will practically pop off, then just sand and smooth a little and you are good to go
Dustin Risseeuw yh your right there mate . Just like leaving dead wood it’s a no no . I always remove the bark. Although you can leave the under side of the bark and sand and oil it that looks kool .Bark will continue growing if my knowledge serves me right. Is that right Dustin ? And good point
Great job!! I have the wood to make my first table the total boat Halcyon was some thing I hadn’t seen before but that looks like a perfect fit for the total boat project. Total boat is the only Apoxsee I’ve used that’s far and never had any thickness!! Thanx for the heads up!
Good practice to tack the whole square down, at least 1 top inside corner and bottom outside corner or 2 racks too and 1 outside bottom, then weld it. With square ends like you had they most likely won’t rack but without them they will rack out 100% of the time. Just good practice to rack the whole frame of anything then weld it out
GREAT JOB ON THE TABLE AND BUILD. THANKS FOR EXPLAINING IT STEP BY STEP, IT WAS HELPFUL TO GET YOUR TAKE ON IT AND WHY YOU CAME TO YOUR CONCLUSIONS. IT'S A VERY INTENSE BUILD BUT VERY SELF SATISFYING UPON COMPLETION. KEEP IT GOING! 🇺🇲🌞✌️👍
Enjoyed the video watched every second. Really great work. Don't think the table needed the LEDs as it looked amazing. Also am sure you can get defusers for the LEDs so that might be an option
I've used appliance epoxy on skid plates on jeeps, it's great stuff if your surface is prepped. Nice vid. Just a tip look at industrial velcro (Lowes, homedepot), it's got way more aggressive teeth and the battery packs are less likely to fall off. You can even put a screw through one side to give it extra hold to the wood.
Question for you on the pour. Would it be better to remove the bark and the use a quick set epoxy on the live edge sides to make the deep pour stick without dealing with bubbles. I have had lots of problems with bubbles forming right on the live edge side when I pour my epoxy.
Thanks for the video. I have similar questions why you don’t de-bark and it seems you cut off the live edge with more character than the straight cut offs in the middle of your table. Are you concerned that the crack’s will elongate? Very nice job welding the frame together. Great video.
I took of all the loose bark. What remained survived the hammer so I figured it’d be fine. So far it has been. As far as layout, it’s what the client chose
Not sure if you were going for a certain look with this but usually you should debark your slabs. It helps with less bubbles and looks better overall. If not definitely use a penetrating epoxy on it before the big pour. Also i think you should power carve the straight edges where the epoxy touches those straight cuts of wood where it transitions to epoxy doesn’t look that great and natural.
Both epoxy and polyurethane resins only form mechanical bonds. So they essentially will not stick to anything that's not porous. Aluminum foil tape, melamine, packing tape, etc all work very well. Waxing it prior makes it even better.
Nicely done....very beautiful. If there is a way to light up the blue epoxy without seeing each individual light would be cool, not sure how you could do that. Maybe some type of a light diffuser mounted in front them might work. But it still very cool piece!
Yeah, I get a comment about every other day that I should've used a diffuser. If I'd known that was a thing I woulda used one. Now I know for next time!
That laser engraver thing is pretty cool. Do you think it's worth the money? Seeing as how it's just a laser, I imagine whatever it's more of a wood burner than an actual engraver, right?
It's a totally semantic thing here I think.. but yes, it's just burning the wood - which is a type of engraving (because it's partial depth, not full depth - cutting). But I think to your point... as a diode laser the materials that can be engraved (burned) are pretty limited. Wood, plastics, paper, cardboard, etc.
Next time you caulk the mold corners with silicone, lay your bead (One side at a time), then spray over the caulk with an aerosol window cleaner like Invisible Glass, then wipe off the excess with your finger in short strokes before the spray dries, cleaning your finger in between with a paper towel. The caulk won't stick anywhere but where you want it! Learned that from a granite guy!
Brother, 1st time I've watched your channel. I'm very impressed with the way you go through each step of your process. You have a calming voice. nice job. Now.... Question about THIS project.... LOVED everything about it, except, what side you chose to be the top and the bottom ????? I guess it's a matter of opinion. But I have never seen anyone use machine cut ENDS of wood for the top. You had like 3 or 4 of them. If I'm not mistaken, you even had one in the center with a machine CUT of an inch out of the end of the wood???? The bottom side where you engraved, looked so much better (my opinion) It had all natural ends on the wood. Is this a thing now? AGAIN, fan of your page and a subscriber. Looking forward to more of your videos.
It’s just a matter of choice. Like I said I miss you the beginning, this was a commission piece and I did a bunch of mock ups for the client and that’s what he picked. As far as the cuts.. it’s kind of a wabi sabe approach, that’s just the story of those pieces being taken from the tree 🤷♂️ that may render them inappropriate for some purposes, but since resin was filling all the gaps, no issue for this one.
This is a tutorial, not the useless ones I have seeing on other channels . Thank you for taking your time to explain. Much appreciated, stay safe out there.
Thanks for watching and the kind words! I do my best.
You are my hero! Sanding resin without protection is so brave.
I just borrowed a really expensive sanding rig with incredible dust collection
Beautiful job! A diffuser sleeve over the led strips would help with the “bulb” visibility through the epoxy. Very inspiring. Thank you!
Thanks! I'll definitely do that next time, didn't know they were a thing when I made this
I work In the fiberglass tank winding industry been watching videos like this and lichtenberg burning for about a day is giving me alot of ideas man keep it up👍👍👍
Thanks! Just be real careful with that lichtenburg stuff. I did a video this spring with epoxy and some Lichtenberg boards.
As I was watching the video and seen all the time and effort you put into that table I said no way it's not worth it..
At the end I was wrong. Its absolutely amazing and will last forever.
THanks! That's how I feel about it too. The first resin project I did I told myself I'd never do one again, then after the pour and cure.. I was hooked.
Very nice work. I agree with your thoughts on the fasteners on the top. When someone spends a couple of thousand dollars they expect the little touches. Totally agree. Beautiful table.
Right on
Love the bark showing, it really looks smart. Commentary through is great and informative, thank you for posting this
Glad you enjoyed it
Eye Candy has GREAT different colors for mixing with epoxy. The best coloring in my opinion!!!
Good tip, thanks!
My wife used a plane for the first time last week we needed to customize a door and she did amazing she starting to get into wood working even though she is allergic to wood dust and I suggested planeing instead of sanding and she loved it I got her some respirators and stuff so the dust wouldn't harm her if she wanted to sand and stuff she also is wanting me to teach her to weld so will be doing that also
Dude that's great! Awesome to see she's getting into it! Yeah, definitely steer her towards the less dusty tools.
@@YouCanMakeThisToo but that's why they make respirators and safety equipment to protect ya I did steer her tords last dusty tools but she will get there
The problem with people doing pours now days is they think its all about having the pretty resin in there and the wood is just a side dish. You need to make the wood look natural like it grew into the resin. All these square cuts just shows that you threw the wood in and made the piece all about the resin. Appreciate the effort put into the vid mate cheers.
I think a problem with society today is an acceptance for stating personal valuations as objective facts. Your opinion on how it should be done is just as valid as my thoughts on trying to keep the wood as close to how it came to me as possible. It’s part of the story of how those pieces went from a tree into the table. Walnut has strong contrast between the heart wood and sapwood. To me shaping a cut of heartwood to look like live edge screams unnatural. It may be a less popular view, but regardless that’s my taste and style.
Out of curiousity, why did you choose to not remove the bark from the boards in this build? I have seen a lot of other videos that say it can cause for issues later. Is there a way to seal the wood with the bark to alleviate this issue down the road as I would love to make a build where the bark stays on for aesthetic purposes
New to your channel. Greatly enjoy building wood pieces. I'm wanting to get into epoxy building. Your knowledge. Is definitely helpful. Only seen this video do far. But. Your detail to not only your work. But to letting your watchers know what your doing and the tools and materials you use. Is simply amazing. Thank you for making this
Anytime! My style has changed a little since this video, but I still try to add all the same value and more. Thanks for the valuable and specific feedback
@@YouCanMakeThisToo Anytime. If you don't mind me asking where Are you located. When I came across this video. It had a lil red memphis beside it when I clicked
@@brandonpatton4776 I was in Cordova, now I'm outside Byhalia.
you're an awesome carpenter. what you did with that stain was just amazing. the wood just became something else when you put that on. The color contrast is really nice also. Good job.
Thank you very much!
Very cool... Great Job.... I love how you leave real life in your videos, because everything isn't always unicorns and rainbows
Thanks! and truth.
This is really nice, and inspiring. Learned a lot from your detailed explanations. I would recommend for the LEDs to use a diffuser in the future. They fit inside and makes it a smooth light and less concentrated per diode, and can mount easier!
Thanks for the tips!
I use a plastic spoon and windex for my caulk shaping. The windex keeps the spoon from sticking to the silicone while smoothing it effortlessly. Some dish detergent and warm water can also be used...just dip the spoon and then smooth away!
That's a good idea!
Putting the led strips on the frame also gives a beautiful cast off I put led strips on my tv stand its steel and wood and best casting of the leds light was on frame facing each other gives this beautiful glow compared to direct light
For sure man!
Love that Duke Blue color on that table! Really that is a great looking table 👌
Thanks!
Man, after seeing your video on calculating epoxy, I was hoping that there would be one of the pour and end result! You did not disappoint my friend!! Very well done 👍🏼
Of course! Wouldn’t miss making a video of this thing 😊
The table is amazing! And you explain everything very clearly!
Thanks so much!
Hi Caleb. Incredible video! I’m completely inspired even though I don’t have a workshop with every thing in it, I can dream. I’m new to resin art and hope to make a similar table at some point. You’ve definitely got a new subscriber here. Thank You so much for sharing your vast knowledge and great skills. This video is just amazing!
Thanks so much! I really appreciate the kind words and I'm glad this video was helpful
Yes 7th will come to anytime
I enjoyed watching you create a very beautiful table, the led lights are the perfect accent.
Thanks so much! 😊
I used to build the plugs and molds used in the construction of fiberglass boats.
A few suggestions for you are to apply the wax directly to the melamine. It should release quite well. Also, there is a product called wax fillet strips that comes in varied radius sizes and is applied using a heated wax fillet tool.
The finished product is nearly perfect and it doesn't require any drying time.
It can be applied prior to waxing and then the paste wax is applied over it.
Nice job on the table. I admire your attention to detail.
Oohhhhhh, I hadn't heard of those. Thanks for the tip! I'll definitely check them out.
@@YouCanMakeThisToo I can second this, the wax fillet tool is also very useful for shaping clay radius if you get into any of that kind of stuff.
YOU ARE A GENIUS! I have been looking for better ways to attach boards to send through the planer never heard or thought of using a hot glue gun, your sir have just changed my life!
Glad you were able to take away something!
The table came out so nice! I can see how handy the laser engraver will be to add a custom maker's mark
Thanks! Yeah, it’s won me over for sure especially at the price point
I really love how you explain everything in detail. Every step, every tool... just amazing. thank you.
I really like how, at the END of the video you say..."please like and subscribe if you think I have earned it". It's a pet peeve of mine when someone asks you, right off the bat, to like and subscribe......before you have even seen the video. I know no one does but it just bothers me. So....good job!
I definitely made that mistake early on. Heard someone talk about it and haven’t screwed that up since! Thanks for noticing 😊
here here! well said
That is very cool. Thanx for a lot of great tips. I haven't begun epoxy work, but I'm loving what I'm seeing!
Great to hear!
Looks great! The finish looks awesome. And as always, the subtle jokes in the voice-over are appreciated ;)
Thanks! 😃 Always good to know someone is catching my lame jokes.
Nice job, it looks like a lot more fun and non stressful when you have access to every tool ever made.
If you think I had every tool then you should see my shop now. PS: I got those tools by building stuff with way less tools and then reinvesting the profits... also, I didn't have other hobbies or interests.
@@YouCanMakeThisToo I didn't mean that comment in a a**hole way. I know most people do earn everything they have whether it be tools, cars, ect. Usually the ones born with a silver spoon are too lazy or not interested in working on projects and would rather just buy something pre made or have someone do it for them. But I can tell you work hard and you love what you do and you're successful with it so you deserve what you have. People who put others down or feel sorry for themselves have to realize that life is full of choices. But I enjoy your videos. sorry for the confusion. Cheers
@@trevorjames5493 No worries brother, and sorry if I came on defensive. I get a lot of comments from folks that do seem to think a shop was just handed to me and sometimes I jump to reading things that way too quickly. I super appreciate your viewership and engagement - and you are right. It is a lot more fun when you have the tools that make the job easier and you can focus on the creativity and not trying to work around your toolset.
Thank you for this informative video. Can I use a clear epoxy (without pigments) to fill the gaps and also cover the surfaces? In other words, can I submerge the wood pieces into the clear epoxy so the epoxy filles the gaps between the pieces and protects the surfaces?
Totally could. But you’d want to do something to hold the wood down or it’ll float.
It looks like the universe to be honest . I'm very impressed .Good Job.
Thank you! Cheers!
I enjoy your videos, I really love those cutting boards , they came out beautiful!!💕👏👏👏
Thank you so much!
Table looks great. Lights are a nice touch. Have you tried maybe some sort of diffuser covering to give the lighting a fuller look rather than separated LED's? Seeing it got me thinking about ceiling lights and how the glass / plastic covering acts as a diffuser while spreading the light out instead of concentrating it to one spot. I'll be subscribing. I always enjoy the patience of a skilled craftsman. Thanks for your effort in creating quality content.
I didn't realize LED diffusers were a thing when I made this, that would've been good to use
It's been like 4 months since it's rain in Arizona. That little bit of rain helped 😊
Glad you got some!
Man thats amazing I love watching people pour epoxy
Thanks!
Very nice work! My question is concerning the LED's, & their placement. Is there a reason why you didn't place the LED's under the edges of the pieces of wood to give the blue epoxy more light, or shine through? It just seemed like certain areas on the table were darker than others. Just curious if there was a specific reason doing it that way. Thanks! Keep up the great work!👍
The original thought was to create an under glow, the shine through was just a bonus
That would of been a good idea too, to run them along the edges of JUST THE WOOD EDGES under the table... but it's still looks amazing either way
Good job on the build and enjoyed the video. Nice and simple with cool background music. You earned it! Until next time, make time to make something.
Ok thanks!
I haven't see anyone else leave the bark and softwood on the live edge. Were you not afraid of a bad seal or it breaking apart later?
Lol love the name change and yes they did otherwise I wouldn’t have this nice house, car, job, n stuff.
@@ogearbox6132 the nice house probably has a lot to do with Mexicans. The nice car probably has a lot to do with the Chinese... And the nice job probably sells a lot to people who are not only white.... Of course that's just a guess
fantastic! I have 30 3x 6 ft slabs of cherry in storage. Will use this as my guide. Thanks great job Bob
Sounds great! Have fun!
Love the walnut with the blue!
Thanks!
Hey bud great video and great table. A lil tip though. When you aren't "good" at welding. Learn going "uphill" by making sure u are pushing your puddle. This will give you a much better weld in the future
Good advice, thanks man!
This blue metal colour is gorgeous 😍 next time seal the bark before pouring epoxy otherwise it’s gonna be weak. FYI just bought the Ortur laser can’t wait to receive it 😊
You’ll love it!
So much amazing technique in this video and skill and the little jokes like mixing and mixing makes it fun and entertaining get so much enjoyment out of watching you work in your element is just amazing bro
Thanks Antonio! I feel the last few months I’ve really honed my style and voice. Glad you enjoy it. Thanks again for always watching and commenting 🙏😃
@@YouCanMakeThisToo you have grown alot in last few months and I agree your using your voice more and we get to see the jokes and the fun side of you and it's making the content even better and your honing them skills
I was always told to remove bark and loose dead segments as the epoxy will come loose after a while
Have you ever had this happen, I'm guessing not as you wouldn't still do it that way
Nope. I take a stiff brush and then light mallet to the bark sometimes. Anything that comes loose is gone. If it stays, it’s good. A good technique is to put penetrating epoxy in any bark you wanna keep. Also depends on the base. This one is supported all the way around so there isn’t much stress on that joint. If it was going on say hair pin legs.. I’d have done something different. Another technique is to put lag bolts or dowels through the bark into the wood for the epoxy to grab onto. If the epoxy isn’t clear.
You can use the melamine with the addition of mold release wax or spray. I have used the method on leave scale poors.
Good tip!
Wow, very interesting concept, it turned out beautiful, your layout caught my eye right off and the blue added more beauty. First time viewer and I'm impressed so I subscribed. Thank you for sharing..
Thanks for watching and subscribing! I appreciate the kind words
Absolutely beautiful table!
The table looks like a southwestern desert painting!
That color is just out of this world!
I'm going to incorporate your techniques on my next pieces i make with old reclaimed wood!
Thanks for sharing!
Thanks for all the kind words and glad I was able to inspire, have fun with your next piece!
I had to subscribe after that cute child said the name of my favorite store LOL 😂 what a precious little 👼
Haha thanks! It's one of my favorite clips. He's a lot of fun.
Maybe, you missed the point of the video?
I didn't read thru all the comments but nothing sticks to clear packing tape. I use it all the time with fiberglass work. Good job on the table.
Clear packing tape works great
I loved everything about this video! The up close and personal shots were my favorite as you already know! And the fact that Wes knew where you two was going was so cute. The jokes you threw in where a nice touch too! I cant wait until you upload more videos. Please keep up the amazing work!
Thanks, Neisha! that was an old clip of him but it’s so cute and was appropriate!
BΤΡΑΚΤΕΡ
Right loved it too this takes so much work. 😂hopefully he can hire a editor one day when he becomes. Famous man with a sock. You watch. That sock we better start to make a concept so we 2 can be RICH LOL
Great video sir and wonderful results with all the professional techniques almost suggests that this DIY project is extraordinarily expensive for a retired income tools are out of my range. Thanks for all the show and tell. Ass whole.
It can be.. it's also possible to buy the small wood pieces that are already planed - or find a friend or woodwork shop that'll flatten them for free or a small fee. Can also do all the flattening with a router sled. Another beautiful thing of hobby woodworking is upgrades can be self funding from selling projects.
Great video, thank you for taking the time to explain. Awesome table!
My pleasure!
I'm a new B... and your video is very inspiring... TY
Thanks!
Wow! Beautiful. The Led lighting just added bumped it to a whole new level. You are very talented and your explanation of everything was amazing.
I have a stationary built-in bar top that is 5' X 13'. It is stained wood that was very nice 13 years ago when my 12 year old son helped me make it, but has seen some major wear and tear since then, of course I could just sand and stain...boring...
I think I can use some of your ideas to renew it. I just love the resin, but I was wondering about a pour that didn't flip???
Being built in; I would basically have to pour it where it sits.
You could definitely do that! Just take care with pouring just the right amount.. and if you err too much, be ready to do a lot of sanding.
I've used Tyvek tape as well as Apel silicone mold release. Both work great. The Apel you spray directly onto the Melamine. Beautiful table, love your work
Good to know!
That's a really good video Caleb! Very well explained, and it's a super-cool piece!
Thanks a ton!
@@YouCanMakeThisToo 2222222222222222222222222222222222222222222222e2222222w22222
I just got done using cheap heavy duty packing tape on a plywood form for a large table pour. Worked great!
Awesome!
Shop sock... classic! That earned a hit on the ol' subscribe button from me.
This was my first video of yours, looks like I've got some catching up to do!
Thanks! Glad you found my channel at a time many of us are likely to have time to binge watch RUclips 😁
Great video and learned a few things. Must have a shop sock for when things get messy and two epoxy does not stick to dry erase boards. Thanks for sharing.
Glad I was able to share something new with you! The shop sock is key 🔑
Such a great build and video as always man! I really like the LED touch!
Thanks, Ethan! The LEDs came out even better than I expected
Nice...I have seen in other videos...they claned the bark and 'sealed' with epoxy...so leaving the bark on turned out pretty cool too...I am just learning. Finished my first in place kitchen tops. I AM HOOKED!! Found my niche..and want more!!!
Nice video!! I found it to be really informative. I'm glad to see that you pretty much do everything yourself. I struggle with that as well. I feel like a fraud if I use anyone else's work to finish one of my projects. I have two epoxy flag videos I'm working. Thanks for the info and nice work!
When it comes to my projects, I do, as that's part of my brand. In my business.. I do my best to find good people who can do everything that I don't need to do, so I can focus on what only I can do.
Your videos are so instructive it's like attending a seminar. I hope everyone is taking notes. Great job and tips to work by. 👍🏻🇺🇸
Thanks so much!
I'm going to be making mine a coffee table. What kind of finish would you use so that the wood isnt affected by any moisture?
I don't think there is a finish that totally prevents moisture exchange. Totally encapsulating in resin is probably the closest thing... But short of that the trick is just finish all sides equally so moisture exchange is the same all the way around the piece.
I use General Finishes... 2-3 coats of Sanding Sealer, sanding between coats, and then 2-3 coats of the 2 part Conversion Varnish and Catalyst, also sanding between coats. It will not leave any rings from drinks or show any kind of liquid spills... it will just bead up and you can wipe it off. It is suggested for spray application but I use a foam roller and make sure there are no lines from the roller, works great.
Odies oil :)
I would recommend using nitro finish
More specifically nitrocellulose laquer
I found laying down a layer of Carpet Shield was a great way to prevent the resin from sticking to the forms instead of strips of tape.
Good tip!
Next time install a diffuser to hide the LEDs. Otherwise, amazing job. Beautiful
Good idea
Seth likes the total oat resin too!😊EPIC JOB!
It's great stuff!
4:50 once you bead your caulk you never forget your technique!
Never!
I would love to see a video on what materials you can use Epoxy on. I have never used Epoxy and want to see the best way to make a project and just use Epoxy or Resin to make a shiny waterproof finish. Ty 🤗
How much does a project like this cost in materials 😃
wood is the biggest variable. About $150 in epoxy and $100 in steel.
How much do you charge to make atable like this?
@@fkpcleaningllc3338 He said in the video about a couple grand.
So glad I found your channel.. I own a screenrprinting and embroidery business and am looking into starting some small time epoxy stuff.
That's awesome, good luck!
Everything was on point, but why oh why in the world did you use a straight line (edged) cut wood in the middle of the table joining the epoxy?
They destroyed the natural organic look of the table.
Very bad choice of woodcut.
I'm pretty sure that's what the first 25 seconds of the video was about - answering just that comment that keeps coming up.
*"Little Dude" ~ going to have a great teacher, that's for sure.*
Thanks!
Watching that blue epoxy river run along the gorgeous walnut edges is pure woodworking porn. I can't watch enough of that, it is so beautiful.
Thanks! I tried to get good shots of it, that's so satisfying.
A little trick I’ve used for years is Vaseline, you can used plan wood for your mold, just grease it good with the Vaseline and your epoxy will never stick to it, you can also use this on the back of projects that you are going to pour without a mold to easily remove drips, they will practically pop off, then just sand and smooth a little and you are good to go
That's a good tip. I'd just be concerned with them both being petroleum products and the vaseline potentially interfering with how the epoxy sets up.
*See’s the shop*
Nope, can’t make this…. :(
Whether you think you can or think you can't, you're right.
I use that marker board for fiberglass molds just use a good release wax and get 2 or 3 lay ups from each one
That’s what I do now too, thanks for sharing 👍
That’s going to have problems in the future because you left the bark on, guaranteed.
Do I get my money back if you're wrong?
YouCanMakeThisToo lol sure bud
Dustin Risseeuw yh your right there mate . Just like leaving dead wood it’s a no no . I always remove the bark. Although you can leave the under side of the bark and sand and oil it that looks kool .Bark will continue growing if my knowledge serves me right. Is that right Dustin ? And good point
Great job!! I have the wood to make my first table the total boat Halcyon was some thing I hadn’t seen before but that looks like a perfect fit for the total boat project. Total boat is the only Apoxsee I’ve used that’s far and never had any thickness!! Thanx for the heads up!
Just make sure to the use the thickset epoxy by them, the other stuff is for really thin use!
Great info, have you put together the list of what epoxy sticks to? That would be another great video, Thank you in advance
Really enjoyed that video bro ,.. very clear , well spoken so we know what ur using ,.. and product references
Thanks!
Good practice to tack the whole square down, at least 1 top inside corner and bottom outside corner or 2 racks too and 1 outside bottom, then weld it. With square ends like you had they most likely won’t rack but without them they will rack out 100% of the time. Just good practice to rack the whole frame of anything then weld it out
Thanks, that’s super helpful!
GREAT JOB ON THE TABLE AND BUILD. THANKS FOR EXPLAINING IT STEP BY STEP, IT WAS HELPFUL TO GET YOUR TAKE ON IT AND WHY YOU CAME TO YOUR CONCLUSIONS. IT'S A VERY INTENSE BUILD BUT VERY SELF SATISFYING UPON COMPLETION. KEEP IT GOING! 🇺🇲🌞✌️👍
Enjoyed the video watched every second. Really great work. Don't think the table needed the LEDs as it looked amazing. Also am sure you can get defusers for the LEDs so that might be an option
Thanks! A lot of folks have mentioned that, if I'd known it was a thing I'd have used diffusers. Now I know if there's a next time.
I've used appliance epoxy on skid plates on jeeps, it's great stuff if your surface is prepped. Nice vid. Just a tip look at industrial velcro (Lowes, homedepot), it's got way more aggressive teeth and the battery packs are less likely to fall off. You can even put a screw through one side to give it extra hold to the wood.
That's a good tip, I'll be sure to look for that!
@@YouCanMakeThisToo Like this www.lowes.com/pd/Scotch-1-in-Black-Roll-Fastener/50246039
Wow that is a nice table, Caleb. Nice work my friend. Another great video too. This was fun to watch.
Thank you! I'm really happy with how both the table and video turned out, I'm glad you it was fun for you.
Question for you on the pour. Would it be better to remove the bark and the use a quick set epoxy on the live edge sides to make the deep pour stick without dealing with bubbles. I have had lots of problems with bubbles forming right on the live edge side when I pour my epoxy.
Some people swear by that, some make a case against it. If you do, you need to scuff that epoxy first
Good job Caleb!!
Thank, Eric!
Thanks for the video. I have similar questions why you don’t de-bark and it seems you cut off the live edge with more character than the straight cut offs in the middle of your table. Are you concerned that the crack’s will elongate? Very nice job welding the frame together. Great video.
I took of all the loose bark. What remained survived the hammer so I figured it’d be fine. So far it has been.
As far as layout, it’s what the client chose
Not sure if you were going for a certain look with this but usually you should debark your slabs. It helps with less bubbles and looks better overall. If not definitely use a penetrating epoxy on it before the big pour. Also i think you should power carve the straight edges where the epoxy touches those straight cuts of wood where it transitions to epoxy doesn’t look that great and natural.
Aesthetics are highly individual
Both epoxy and polyurethane resins only form mechanical bonds. So they essentially will not stick to anything that's not porous. Aluminum foil tape, melamine, packing tape, etc all work very well. Waxing it prior makes it even better.
Great simplification, thanks!
Diffuser channels would even out the leds and give a better lighting effect?
Probably would.
Nicely done....very beautiful. If there is a way to light up the blue epoxy without seeing each individual light would be cool, not sure how you could do that. Maybe some type of a light diffuser mounted in front them might work. But it still very cool piece!
Yeah, I get a comment about every other day that I should've used a diffuser. If I'd known that was a thing I woulda used one. Now I know for next time!
Sooooo talented. It’s stunningly beautiful!!!
Thank you so much!
That laser engraver thing is pretty cool. Do you think it's worth the money? Seeing as how it's just a laser, I imagine whatever it's more of a wood burner than an actual engraver, right?
It's a totally semantic thing here I think.. but yes, it's just burning the wood - which is a type of engraving (because it's partial depth, not full depth - cutting). But I think to your point... as a diode laser the materials that can be engraved (burned) are pretty limited. Wood, plastics, paper, cardboard, etc.
Next time you caulk the mold corners with silicone, lay your bead (One side at a time), then spray over the caulk with an aerosol window cleaner like Invisible Glass, then wipe off the excess with your finger in short strokes before the spray dries, cleaning your finger in between with a paper towel. The caulk won't stick anywhere but where you want it! Learned that from a granite guy!
That's awesome! I'll have to give it a try, thanks for the tip.
@@YouCanMakeThisToo You're welcome. Thanks for being so informative on your videos!
Brother, 1st time I've watched your channel. I'm very impressed with the way you go through each step of your process. You have a calming voice. nice job. Now.... Question about THIS project.... LOVED everything about it, except, what side you chose to be the top and the bottom ????? I guess it's a matter of opinion. But I have never seen anyone use machine cut ENDS of wood for the top. You had like 3 or 4 of them. If I'm not mistaken, you even had one in the center with a machine CUT of an inch out of the end of the wood???? The bottom side where you engraved, looked so much better (my opinion) It had all natural ends on the wood. Is this a thing now? AGAIN, fan of your page and a subscriber. Looking forward to more of your videos.
It’s just a matter of choice. Like I said I miss you the beginning, this was a commission piece and I did a bunch of mock ups for the client and that’s what he picked. As far as the cuts.. it’s kind of a wabi sabe approach, that’s just the story of those pieces being taken from the tree 🤷♂️ that may render them inappropriate for some purposes, but since resin was filling all the gaps, no issue for this one.
I'm curious - aren't bark and softwood parts too much of a risk of the table breaking later? Not to mention it must be a nightmare to finish bark.
What kind of epoxy did you use? I never seen you hit it with a blow torch or any kind of heat to get the bubbles out.