Nice tutorials. One thing I can't seem to get to work, (Assuming it can) Is to get opposing AI to work prior to the scenario start time. I'm trying to create a scenario based on a real world time table. so what I usually do is start the opposing AI at the opposite end of the route, starting at a time when it's arrival is at or after the players origin departure. Then additional ones up until player reaches it's destination. This always worked in MSES and Open Rails, so I'd be real surprised if it couldn't be done in TS2016. The problem I'm having in TS2016 is it won't let the AI depart until at the time of my departure, and if a force a time, it thinks I want to depart that time the next day. Do you know how I could get this to work? Thanks in advanced. and Happy Holidays!
good video been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.
Can u show both train run at same time in diferrent lines.. and first train stop in one platform n other overtake at same time n other train stop at next platform and first trian overtake at same time n so on
+Matt Peddlesden Hi matt Quick question im making a scenario Called Grain through the rockies on Sherman hill route on one Go via I go through it example Go via Larimie main 3 east I go through like 28 or 30 Mph and it wont trigger it do you know what the problem is? if you have a answer that would be helpful thanks!!
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with hst's, have you do you know of a link for how to set up Go Via instructions please.
Video is good.......all tutorials are useful.........please make a video with at least 10 AI trains running.......... i am not able to perform that.............for example ....if i place a train timed at 12.40....it is not starting at that time.......path of the train is alright......as there are no error nor warning messages..........again if i set a players train at 12.00 and AI train at 12.20......and u get to the scenario ( restating )...it is seen that players train as well as the AI train both is given green signal...( both the train is going in the same direction )........ in case of MSTS 2001....traffic creation was much easy.......and simple.......... also in scenarios u cannot change the timing.........for example if the scenario starts at 11.00....players train cannot start at 11.30...... i don't know whether i am the only one having these problems............if any solutions are there ..pls reply.
I’m not getting the same screens as you, I click on the same things as you but I don’t get the screen with the selection of stations. Also you don’t explain how to go up to track level. Is there an even more basic tutorial?
I'm trying to make a standard scenario where I run UP1983 down Sherman Hill but I don't know how to add DLC's into the scenario. Can you help me with that?
i added my own coal loading industry to the cloned map, but i dont know how to make the train load items from the plant ive placed, the train will go to pre set industries on the cloned route but when i place one down myself i can't get the scenario to recognize it?
***** ive tried but when i go to set the pick up coal option at the set location in the timetable it doesn't agree my point is valid, i was just wondering if i could reconstruct a copied route? Trainz interface was so easy compared to this one, the best thing about trainz editor was the auto correction signaling on conflicting train paths, ts 2016 is such a steep learning curve... ty for the advice on my issue ill keep on trying. Show less
dear Matt I was told when I purchased all of my games just trains purchased from u were compatable with train sim so will you please tell me how this works
Hey Matt I have a question. I wan't to make a Scenario on the Marias Pass and I wan't to use Kuju SD40-2's but all the locos that I can use are the SW1500 and ES44DC and there is no other Locos so how do I use locos from other routes like the Cajon Pass, the Norfolk Southern Coal district etc. So please can you help me and answer my question it would mean a lot :)
+Bacon_Sentry On the loco menu on the bottom row on the far left you'll see like an orange arrow. Click the arrow, which will bring up a menu on the right side of the screen. From there, all you have to do is go through the list and to find the creator of the train you want to choose. Then tick both boxes next to it. Enjoy!
Hi Matt - I tried posting last night and my post somehow disappeared... How do I get an AI train that's behind me with higher priority to pass me when I route myself into a siding? I tried this experiment on the vintage 1950's New Haven to Springfield. My train's priority is set at "standard freight" and begins at Springfield at noon. At 12:04 a southbound passenger with "express passenger" status begins behind me on the same track. At Thompsonville, I'm routed into the siding. At the south end of the siding where I'm stopped, the passenger train holds the main but ends up stopping right beside me with a red light while I've got the green light. Seems to me this shouldn't be. What am I doing wrong? How do I get this passenger train to simply pass me on the same track?
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with hst's, have you do you know of a link for how to set up Go Via instructions please.
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.
Sweet! The D&RGW route's going to have snow textures on the locos like Donner Pass!
Thank you Matt for a very useful and informative video, keep up the good work.
Thanks Matt, really appreciate all these tutorials.
How do you do things like coupling, and do a platform share that needs the player to ask for permission to pass the red light
Nice tutorials. One thing I can't seem to get to work, (Assuming it can) Is to get opposing AI to work prior to the scenario start time. I'm trying to create a scenario based on a real world time table. so what I usually do is start the opposing AI at the opposite end of the route, starting at a time when it's arrival is at or after the players origin departure. Then additional ones up until player reaches it's destination. This always worked in MSES and Open Rails, so I'd be real surprised if it couldn't be done in TS2016. The problem I'm having in TS2016 is it won't let the AI depart until at the time of my departure, and if a force a time, it thinks I want to depart that time the next day. Do you know how I could get this to work? Thanks in advanced. and Happy Holidays!
Any advice on adding ai trains to cross each other (or the player train) on single line routes?
hi ya,is there a video on coupling an engine to coaches without a.i crash?
Anyway to find a replete button to keep trains doing same route ?
good video been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.
Can u show both train run at same time in diferrent lines.. and first train stop in one platform n other overtake at same time n other train stop at next platform and first trian overtake at same time n so on
Congrats on the 1008 RUclips subscribers!
+Matt Peddlesden Hi matt Quick question im making a scenario Called Grain through the rockies on Sherman hill route on one Go via I go through it example Go via Larimie main 3 east I go through like 28 or 30 Mph and it wont trigger it do you know what the problem is? if you have a answer that would be helpful thanks!!
Nice video.Do you know how you add unexpected events for example a broken signal e.t.c.? Thank you
Thanks for the tutorials Matt
Can you set all the junctions while creating a Standard Scenerio?
ok
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with hst's, have you do you know of a link for how to set up Go Via instructions please.
Can you make a tutorial about how to make set locations and gps locations?
Towards the end @ 1:12:02 : what is the Command+9 option on a PC?
If you would make the music just a tiny bit louder, we couldn't hear you at all.
Why can't I get the ai trains to switch there junctions?
Video is good.......all tutorials are useful.........please make a video with at least 10 AI trains running.......... i am not able to perform that.............for example ....if i place a train timed at 12.40....it is not starting at that time.......path of the train is alright......as there are no error nor warning messages..........again if i set a players train at 12.00 and AI train at 12.20......and u get to the scenario ( restating )...it is seen that players train as well as the AI train both is given green signal...( both the train is going in the same direction )........
in case of MSTS 2001....traffic creation was much easy.......and simple..........
also in scenarios u cannot change the timing.........for example if the scenario starts at 11.00....players train cannot start at 11.30......
i don't know whether i am the only one having these problems............if any solutions are there ..pls reply.
I’m not getting the same screens as you, I click on the same things as you but I don’t get the screen with the selection of stations. Also you don’t explain how to go up to track level. Is there an even more basic tutorial?
I'm trying to make a standard scenario where I run UP1983 down Sherman Hill but I don't know how to add DLC's into the scenario. Can you help me with that?
ok thanks!
By that I mean set locations on a custom route?
i added my own coal loading industry to the cloned map, but i dont know how to make the train load items from the plant ive placed, the train will go to pre set industries on the cloned route but when i place one down myself i can't get the scenario to recognize it?
***** ive tried but when i go to set the pick up coal option at the set location in the timetable it doesn't agree my point is valid, i was just wondering if i could reconstruct a copied route? Trainz interface was so easy compared to this one, the best thing about trainz editor was the auto correction signaling on conflicting train paths, ts 2016 is such a steep learning curve... ty for the advice on my issue ill keep on trying.
Show less
+Matt Peddlesden another quick ? also, can train be made to leave the scenario through the means of a portal?
***** tyvm
What's that about speeding up time?
dear Matt I was told when I purchased all of my games just trains purchased from u were compatable with train sim so will you please tell me how this works
+Tony Upton so wot can I do
when I make my Sceniario it pop's up at the end and says it's missing name and won't play. Any Ideas how to fix this?
On mine, i want to change a chengdu suining standard scenario to career, but i cant use the open button to open the folder.
+Matt Peddlesden how do you do go via?
never mind I think I found out how to do it
how do i set a Go Via??
Hey Matt I have a question. I wan't to make a Scenario on the Marias Pass and I wan't to use Kuju SD40-2's but all the locos that I can use are the SW1500 and ES44DC and there is no other Locos so how do I use locos from other routes like the Cajon Pass, the Norfolk Southern Coal district etc. So please can you help me and answer my question it would mean a lot :)
+Bacon_Sentry On the loco menu on the bottom row on the far left you'll see like an orange arrow. Click the arrow, which will bring up a menu on the right side of the screen. From there, all you have to do is go through the list and to find the creator of the train you want to choose. Then tick both boxes next to it. Enjoy!
elaitch Thanks for the help Matt!
Hi Matt - I tried posting last night and my post somehow disappeared...
How do I get an AI train that's behind me with higher priority to pass me when I route myself into a siding?
I tried this experiment on the vintage 1950's New Haven to Springfield. My train's priority is set at "standard freight" and begins at Springfield at noon. At 12:04 a southbound passenger with "express passenger" status begins behind me on the same track. At Thompsonville, I'm routed into the siding. At the south end of the siding where I'm stopped, the passenger train holds the main but ends up stopping right beside me with a red light while I've got the green light. Seems to me this shouldn't be.
What am I doing wrong? How do I get this passenger train to simply pass me on the same track?
Out of memory crashes are the worst
Totally wrong place to be. But do you have any lessons about stopping markers at stations so AI TRAINS don't go to end of platform
Is there a way to type in a custom name of a station on a sign?
***** Do u think DTG could add that feature? That will be extremely helpful.
thanks.
怎么做本务待避AI？
How would you do something like teleporting to get to other services quicker?
when you create a station, how can you make every station the same length??
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with hst's, have you do you know of a link for how to set up Go Via instructions please.
What's that about speeding up time?
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.
good video,been looking for a video on stopping points as I'm a bit rubbish at hitting the mark especially with the hst have you do you know of a link for how to set up Go Via instructions please.