I'm a new subscriber and I'm addicted to your video the models are amazing thanks for the videos I really enjoy them plus I pick up tips for my builds thanks
Wow nice. Thinking of getting one of these for a basic build for me and my boys. We have built a few Rc kits not one these. Would this bus be ok for a beginner as we like the vw bus
The paint might be too thick or the PSI might be too low for the consistency of the paint. Acrylic paints tend to clog up more than lacquers do, however, so keep that in mind. There could also be paint particles (again, acrylic paints tend to leave more residue than lacquers or enamels do) stuck somewhere in the airbrush that doesn't allow for clean air flow to the nozzle. Make sure you clean your airbrush thoroughly
Great work. Question. I watch you mark the mold lines but I don't see them. When I try to find them on my model, they don't appear as much as yours. How do you determine where the mold lines are? Are they always in the typical places you mark? Thanks for you advice and it's impressive to watch you work.
They'll usually be in the same spot on most models. Obviously, some models are worse than others and have a lot more noticeable mold lines. They'll typically be in the same spots as the model in the video and it will usually appear to be one continuous line (because it is).
Do you need to sand the model before BRUSH painting? or is it optional? i was actually planning to BRUSH paint my model without primer with tamiya acrylic. Please help me. Im new in modeling
OMG!! I've got the same kit, and I'm going to build it as a tribute to my dad, who had a 74 Second generation (T2)
Scrumptious bus buddy. A little breath-taking, seeing it built all in one go, like that.
きれいな仕上がりですね、勉強になりました。🌟🌟🌟
I love how you lowered it. Super cool.
You're one of the best modelers on RUclips! Gorgeous work as always! Thanks for sharing.
Dude. Gorgeous. Paint scheme is well thought out. Very nice work
Amazing work as always, the textured paint for the sunroof looks perfect, I'd completely forgotten that stuff existed!
Nice build, mods and finish 👍👌😎
Mad skills my friend!! I love those Hasagawa kits.
Awesome build Tom!
Another great video bud.. Love the finish on that body... Awesome!!
Beautiful job
Prachtig!!werkelijk prachtig!
Your builds are fantastic, keep up the good work!
Quality as always!! Looks awesome!!!!
That's cool.....nice stance
I'd LOVE to see that build in candy purple/ivory with a white interior.
Parabens pelo trabalho.brasil !!
You bro are a master love your work
Great Job..... nice homage on that VW - bus
The Raiders would be proud
This is so nice nice nice!!!!
The best I've seen from you.
Amazing always.
I'm a new subscriber and I'm addicted to your video the models are amazing thanks for the videos I really enjoy them plus I pick up tips for my builds thanks
Cool
Awesome build! :D
That’s a type 1 and my dad has a type 2 it’s way different
Btw. Love you vids
great build was wondering if you could do a hasegawa bmw 2002 in future as this model came out so fine , cheers
BEAUTIFULLLLLLLLL
Magnifico
the rear suspension looked a little strange at fist, very good looking build
U used the enamel as a glue on the floor there, nice one
Great
I would love to see a Aston Martin DB5 build...
hi nice work. will you sometimes build a truck?
このキット見つけたら即買った方がいいよ！
すぐに売れちゃうからね。
How did you lower the rear suspension?
That is fucking good
Amazing work Sir I have a question about what color you used to paint the seats thanks and keep up the awesome work.
Where did you get your airbrush? And what type do you recommend? Great video. Loved it and the color combo!
I just binged all ur vids I love these so much, do u think u can make an rx7 by any chance?
Already did
I love it except those wipers.
Wow nice. Thinking of getting one of these for a basic build for me and my boys. We have built a few Rc kits not one these. Would this bus be ok for a beginner as we like the vw bus
a bit expensive, but realy easy to build
Do you know a way to stop paint from splattering in the airbrush?
The paint might be too thick or the PSI might be too low for the consistency of the paint. Acrylic paints tend to clog up more than lacquers do, however, so keep that in mind. There could also be paint particles (again, acrylic paints tend to leave more residue than lacquers or enamels do) stuck somewhere in the airbrush that doesn't allow for clean air flow to the nozzle. Make sure you clean your airbrush thoroughly
Andy Lamby, thank you for sharing your knowledge
Great work. Question. I watch you mark the mold lines but I don't see them. When I try to find them on my model, they don't appear as much as yours. How do you determine where the mold lines are? Are they always in the typical places you mark? Thanks for you advice and it's impressive to watch you work.
They'll usually be in the same spot on most models. Obviously, some models are worse than others and have a lot more noticeable mold lines. They'll typically be in the same spots as the model in the video and it will usually appear to be one continuous line (because it is).
thanks. Watching the videos, he marks all over the models. That's a bunch of mold lins
Is there any place where I can buy finished models?I don't want to spend so much to do one.Thank you!
Superb build, where did you get the alloy wheels from, thanks
scaleproduction
@@TheScalemodelingChannel thanks 👍👍👍
I had a link to get the safari window kit for the 23 window bus but can't find. Help if you can! :)
Highlight model studio
Awesome painting, construction process as always...sorry don't like the wheels😕
where do I get aftermarket wheels at I wanna be able to order a bunch of sets
Thescalemodeler.com
Hey Tom what size is the Yellow House Panel Scriber that you use? I see a 1 and 2.. thank you..
1
The Scalemodeling Channel Okay thank you...
👍👍👍👍👌
Do you need to sand the model before BRUSH painting? or is it optional? i was actually planning to BRUSH paint my model without primer with tamiya acrylic.
Please help me. Im new in modeling
If you are going to BRUSH paint it. You dont need to sand it
Great model. But you didn't show how you modified the rear suspension.
I did not modify it. Just glued the axle in lower
They never made minibuses only vans it was third party that converted then to mini buses which is why I prefer bays all day long.