Programing the Arduino with PLC Ladder Simulator Pro

Important: In the new version of the firmware it’s not required to reset the board once is connected to the Android device, the feature of 8 seconds of the blinking led L (pin 13 ) was removed, the board can be programmed any time after it’s connected to the Android device.
PLC Website: plcladdersimula...
Developer Website: www.casnisoft.c...
Developer e-mail: [e-mail]
PLC Ladder Simulator (Free Version)
play.google.co...
PLC Ladder Simulator PRO
play.google.co...

[@daniealriky4942]

May I ask some question, I'm currently working on a project, it it possible nodemcu to communicate or interface with arduino that using plc ladder diagram? if it can, how it can be done?

[@ismaelsosa2817]

Hi casdata, good work! Just wondering if the app can be used with other PLC's and programmable relays e.g. Allen Bradley, Mitsubishi, Omron, etc.?

[@casdata]

Hi Mr. Ismael Sosa, the app only works with the Arduino UNO, Nano and Mega boards. For the moment it's not compatible with any plc's brands that you mention.
Thanks for your interest in the app.

[@jhc100]

Can i use the arduino uno compatible(clone version) ?

[@mohamadfaizalromli2235]

Hello there,can I control the input/output directly from the software using bluetooth?

[@akashsharma5276]

Will you please explain....
Arduino have common input ouput pins from D0 to D13. But ladder programming has I0.0 Q0.0 ans soo on... so how we classified all this.
Please tell

[@rasmus12345678998765]

In ladder you go
i0.1-0.9
I1.0-1.9
So input 13 would be I1.2

[@rasmus12345678998765]

Sorry i0.0-0.9
1.0-1.9

[@andrewdeguzman4823]

Hi sir which model of plc that you are used

[@jameelsheik]

Thanks for sharing this video.
1)Do we have to upload any code to audrino before using this app?
2)There are two PLC ladder stimulator app available in play store. One is PLC ladder stimulator and second is PLC ladder stimulator pro. Which one is to download??

[@ansolisju]

Hello, Is it possible in the free version to upload the ladder code to an Arduino Mega and keep it there with out the need to keep the phone conected?

[@surajrizal492]

i haVE DONE EVERYTHING BUT FINAL RESULT I GET IS REVERSE OF WHAT I HAVE PROGRAM IN LADDER .please tell whats the issue .

[@L_Offc_16]

What function your program? Actually for what?

[@pandeeswarans7126]

good job sir, is it possible for online and offline simulation ,read the program from arduino

[@prosenjitsutradhar8802]

Hi casdata, will this work on the Arduino Clone?

[@izsauperl]

Can't upload the ladder project to uno. when i press reset it only blinks once, and not repeatedlly...

[@casdata]

Hi Mr. Iztok, check that you correctly upload the firmware for the arduino UNO to the board, the last firmware (firmware_uno_v1.02.ino), the board should blink for 8 seconds every time that's powered on or you the reset button is pressed.

[@rangaswamy8604]

Is it possible to program Arduino NANO?

[@felaflame]

Excellent video, thanks.

[@thanyitimothyraphalalani9960]

Hi. I am doing my final samester project for Electrical Engineering and what you've done here is exactly what I need for my final project. I want to ask if you could explain everything in detail so that I may apply it. Thank you very much

[@johnsamuel8722]

super!
can I tell me what cable have u used to download the program from mobile to Arduino please...

[@casdata]

Hi Mr. Jonh Samuel, it's an usb otg cable.

[@prasaddalavi9683]

Could you just help with how to read PLC data using arduino?

[@dineshk8285]

The output pins are continuosly in high state without any input signal.Wat could be the issue please sort it out.

[@aircondservicetechnician4553]

Same case.. when button not press yet.. output always high..but when button press, output go to low..

[@risnarusdiyanti7878]

Cause more safety if we used NC relay.. when load working..

[@spstudio9229]

how do you wired input and output?

[@keithscott9774]

Normally I don't need to play a video in slow motion to be able to follow things.

[@J4K_Shred]

how do you wire inut and out put!!!!!!!!!!!!!!!!!!!!

[@AFSARmohd999]

This software not available in iOS
Help me

[@casdata]

Mohd. AFSAR The app is available only for Android devices.

[@nguyencao8144]

Fuck u, forget ios and play with android

[@snizzypoosexcellentspooner2468]

When trying to verify the firmware sketch I get an error that the sketch is too big.

[@casdata]

Hi, download and use the last version of the Arduino IDE from arduin.cc, this may solve the issue.

[@bayuj4ncok]

Who need plc when u hv arduino 😙

[@mikdamronoue3176]

Every engineer who designs an industry

[@masbro1901]

Itu buat ngontrol lampu doang ya

[@andaytomboy3945]

apa butuh tambahan modul pak?

[@shahsher0]

Fantastic bro 👌

[@nachikethemantkalantre7015]

excellent!

[@rannvijaysingh1]

Can we interact with hmi

[@phamtanduong4426]

what is the software?

[@casdata]

PLC Ladder Simulator, it's only available for Android OS (plcladdersimulator.weebly.com/) (play.google.com/store/apps/details?id=com.casdata.plcladdersimulator)

[@aravindhangk0066]

I want more video with simple programming at free version

[@griffinoracion6736]

mura kag pahong hinay² sad kahag tuplok ga dali ka yawa onsa nato pag kat on yawa

[@TutocarloCV]

excelente video

[@meifanisumadijaya4480]

thanks!!

[@edutech2463]

App name plz

[@casdata]

PLC Ladder Simulator, it's only available for Android OS

[@ravindravishwakarma3938]

please star delta program send

[@idomake4429]

useless video. Put in some play by play, explain what you're doing, skip the goofy music.

[@casdata]

Hi Mr. Idomake, a detailed explanation can be found at plcladdersimulator.weebly.com/pro-edition.html in the "How to use and upload the PLC design over USB" section.

[@cristiankenthdiazcercado4100]

SUPER LO MAXIMO

[@herbertstevensolante5089]

Its just to fast 😑

[@er.mohammadadil8423]

You should explain by your own voice

[@meifanisumadijaya4480]

thanks!!