I liked how the different projects were built to use the Arduino micro controller. It takes dedication to built the peripherals to work with the Arduino, and a lot of time getting all of them to work and be timed properly. Your imagination is the only thing you need. Thumbs Up!
One issue I have with the stator winder is that the wire is being twisted during each turn without the twist being relieved. This will inevitably weaken the wire on a large number of turns and potentially cause premature failure. All commercial winding machines take account of this by having the bobbin feeding the winder rotate as well, thereby relieving the wire of any twist at all.
Are you seriously comparing commercial grade machines to an arduino project? Okay then little Jimmy just needs a gas powered V8 in his soap box derby car for the down hill meet on Saturday. Goofball.
@@mezmerizer0266 no I'm not! I'm comparing an Arduino project's output to what is required! If all that is going to be done is just twist the wires then why waste time, money and effort on an Arduino ... A standard old fashioned hand twist drill can do the same thing, otherwise get the Arduino doing something of real value! Bozo!
@@mezmerizer0266 No! A good design of arduino winder can solve this problem! I found some video doing the similar winder or cutter in very precise way!
This video beats all the other Arduino projects vids I've ever watched. Would I use any of them? Probably not. But the level you took each project to is absolutely impressive. 👍 Thanks for sharing it.
I'm thinking of getting into thee Arduino after the holidays. I have a project in mind for next Xmas. I want to make an array of 16 X 16 LEDs that I can hang - maybe on a window. I want to be able to turn individual array (elements) on or off. By doing this, I want to be able to design patterns using the LEDS, maybe cycle through a list of patterns I design. Perhaps, later-on, cycle through so much that it appears to be in motion - like changing the position of a snow flake, so that it appears to be falling (in motion). Maybe this is something you could do and I can see how you approach it - - again I am just starting off so this project may be beyond me ' right now.' Maybe you can scale it down to a demo version more suitable for your channel & your audience.
Aren’t you the lil genius! Mind telling me where I may get the plans and sketchers to build some of your projects, or are they private? Either way thanks for sharing. It is obvious that you have put quite a bit of time and thought and effort into projects themselves.
Barny the hamster here - i,d like to thank all the people who try to make these tool items but ends up building Hamster tables & swings & catapults wheely bins and wotnots cheers :)
@@anandjoshi8554 If by that you mean will it still have a program to run after power loss, then yes it will. It doesn't need battery backup. If you mean it will remember it's last state while it was running, that depends on the program and whether it was written to store it's last state in memory. You have to remember, this is just a simple microprocessor and not a PLC which are two radically different things. (A retired AB RSLogix500 & RSLogix5000 PLC programmer for 40 years.)
Top 20 projects? Hardly. Half of these are 'Measure & Cut' or Wire Winding machines, which are basically 'measure and cut'. Are they cool? Sure. But not 'Top-20' material.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
As a person just getting started with Arduino, I REALLY enjoyed all of your projects. Very inspiring. Thank you for sharing.
Imagine the amount of stuff made to do specific tasks in this mans house.
I picture Rick Moranis in Honey I Shrunk the Kids
I liked how the different projects were built to use the Arduino micro controller. It takes dedication to built the peripherals to work with the Arduino, and a lot of time getting all of them to work and be timed properly. Your imagination is the only thing you need. Thumbs Up!
One issue I have with the stator winder is that the wire is being twisted during each turn without the twist being relieved. This will inevitably weaken the wire on a large number of turns and potentially cause premature failure.
All commercial winding machines take account of this by having the bobbin feeding the winder rotate as well, thereby relieving the wire of any twist at all.
Are you seriously comparing commercial grade machines to an arduino project?
Okay then little Jimmy just needs a gas powered V8 in his soap box derby car for the down hill meet on Saturday.
Goofball.
@@mezmerizer0266 no I'm not! I'm comparing an Arduino project's output to what is required! If all that is going to be done is just twist the wires then why waste time, money and effort on an Arduino ... A standard old fashioned hand twist drill can do the same thing, otherwise get the Arduino doing something of real value! Bozo!
@@mezmerizer0266 always one to put someone else down.
Ok Mr. Bob, be a hero. lets see you make one using Arduino to do what you say instead of talking bad about it.
@@mezmerizer0266 No! A good design of arduino winder can solve this problem! I found some video doing the similar winder or cutter in very precise way!
You are quite ingenious to design and build these machines! Well done!
I think that might be the most overkill rock tumbler I've ever seen.
"I’m impressed by how well you explained everything in this video. It was engaging and informative. Can’t wait to try this out myself!"
Incredible collection of projects. I am in the middle of doing the DSLR slider right now. Well done to you.
Ok
@@samosachattraju7030 Do you know the video maker?
No bro
Lovely projects, small production and cutting machines.
Cool projects mate
Que de beaux projets! Quelle imagination! Bravo et merci de nous les faire partager.....
where do you source your aluminum, brass, copper stock, rods, parts, etc and your other metallic parts for your projects ?
When mechanics and Arduino come together, genius things happen.
You can make a carpet weaving machine.
Wherever you live, whatever you 'do', they're lucky to have ya. I strongly suspect that you're good at most things that you try...😆
Interesting projects! Thank you!
This video beats all the other Arduino projects vids I've ever watched. Would I use any of them? Probably not. But the level you took each project to is absolutely impressive. 👍 Thanks for sharing it.
Шикарная работа!!!!
Your projects are very good! Do you use the Nextion display in your projects?
Great video 👌🏻👏🏻
How do you expect me to react... like woww the #14 idea was just amazing, how did you manage to turn the motor on
great video, It would be great if there was a circular coil project like the ones we find in metal detector discs!
WTF???
Very satisfying 😊
I would put a little bit of drag on the wire to make it sinch up with the armature. Also, you need a micro stepper motor to make the winding be tight.
will the Adriuno's programming holds if power fails and resumes ?? as in case of PLC.
@@ericbwertz tnks for reply. but v late..I already completed my job with plc n complete software programming as per my need. Thaanks.
I'm thinking of getting into thee Arduino after the holidays. I have a project in mind for next Xmas.
I want to make an array of 16 X 16 LEDs that I can hang - maybe on a window.
I want to be able to turn individual array (elements) on or off.
By doing this, I want to be able to design patterns using the LEDS, maybe cycle through a list of patterns I design.
Perhaps, later-on, cycle through so much that it appears to be in motion - like changing the position of a snow flake, so that it appears to be falling (in motion).
Maybe this is something you could do and I can see how you approach it - - again I am just starting off so this project may be beyond me ' right now.'
Maybe you can scale it down to a demo version more suitable for your channel & your audience.
I mean “output” though
Very nice!
Do you have a link to the touch display please?
Why don't you run the first one straight through so we can see how the windings change to each pole?
What is with all the wire and rope winding machines !!??
what is the name of the TFT touchscreen you are using?
Where is the part list? Code? Circuit plans?
Cool Machines! You could extend the label suspender to full working label printer with some hot wires as a print head by the way.
1:15 3 dollar 3 dollar 3 dollar 3 dollar 3 dollar 3 dollar 3 dollar
Would you please help me with the project of building a bottle labeller and how to contact you. Thanks in advance for your reply Stevo
Well, good and creative.
Can you make a machine that can weighing dough for baking.
Aren’t you the lil genius! Mind telling me where I may get the plans and sketchers to build some of your projects, or are they private? Either way thanks for sharing. It is obvious that you have put quite a bit of time and thought and effort into projects themselves.
Nice work, all of the projects were very good.
Op projects bro 🤘😇😇
Hermoso video, demsaido invormativo para mi
놀랍네요. 영상 재미있네요.👍
Excellent!
Awesome compilation!
Barny the hamster here - i,d like to thank all the people who try to make these tool items
but ends up building Hamster tables & swings & catapults wheely bins and wotnots cheers :)
Nice video, thanks for sharing it :)
bro loves coils
Wow, just wow. Totally enjoy the video, what creativity and smart too. Thanks for posting sir.
I would like to see you build a wire crimping machine for 28 gauge wire. That I would build.
Subscriber in Florida.
Nicely done!
It's cool!
The ability for it to be so precise is so mind blowing. Down to the fucking nanometer, if not finer. Holy shit.
No it's not that precise.
what is the black screen reference please
very nice work 🎊
Top man 🔥
Nice projects
How about a card shuffling machine
Hi, I want to make a cnc machine, but I can't find mechanical parts in local market. Can you show me from how one can salvaged these parts
Do you know any computers ideal for beginners to learn how to program circuit boards?
I don't know where can I use them
cuanto potencial tiene arduino. Espero encontrar a alguien que lo sepa aprovechar
Muy buen trabajo funciona bien y muy fácil de usar un saludo
Number 8 is awesome. It would be crazy to make some knitting machine :)
which touchscreen and Arduino is used and how do programming
Impressive works. Do you have double tape applicator machine for small boxes?
Where i will get items
Nə qəşən şeydir bunu düzəldən alimdir məndə elə böyüyəndə alim olacam 😂😂😂😂😂
All these ideas are good for industrial applications, they seemed pretty boring for starters.
Me: Watches video, gets inspired.
Also me: Prints "hello world" on LCD.
Great video.
how to order the right pcb
how in all projects the dc motors are connected?
Take a look at the different motor drivers: L293D, L298N, L298D
@@jacobadamczyk3353 will the Adriuno's programming holds if power fails and resumes ?? as in case of PLC.
@@anandjoshi8554 If by that you mean will it still have a program to run after power loss, then yes it will. It doesn't need battery backup. If you mean it will remember it's last state while it was running, that depends on the program and whether it was written to store it's last state in memory. You have to remember, this is just a simple microprocessor and not a PLC which are two radically different things. (A retired AB RSLogix500 & RSLogix5000 PLC programmer for 40 years.)
v late answered !! I already used plc for programming /project successfully , thanks.@@DaveBuildsThings
Just variations on a wire winder.
omg so industrial
0:50 what is the name of this screen?
TFT 2.5 inch display
Soo cool you are 🤩😊😊😊😊
I need this full project with small correction
Great video
Espectacular
Gracias
There is not enough machine that can do circumcision according to the program
What is the price of wire cutting and strip machine
All were either winding or cutting machines, nice (my own) arduino projects top 😑
Erinomaista keksimistä.
Fantastic
Arduinos are so cool but idk what I would make
Top 20 projects? Hardly. Half of these are 'Measure & Cut' or Wire Winding machines, which are basically 'measure and cut'. Are they cool? Sure. But not 'Top-20' material.
Throw in a fishing line to reel winder and you’d have a sale!!
Biggest fan
Nice
All of them useless ideas
they are not useless ideas
Woooow. Can't imagine this type of useless guy @Skidkev could even exist.
They are not useless very foolish ideas
He litlary wasted around 2000 rs for cutting paper
Those are just prototype. In industrial scale they can be very useful
@@Manzz2 will the Adriuno's programming holds if power fails and resumes ?? as in case of PLC.
The thumbnail looks like gta
what is library for user interface?
So cool
Like, you spend so much time and money for this video?
good!
How to get program codes for ARDUINO
20 arduino projects but 18 are wiring machines
How to buy this products
Top 20 ???? Really ????? Top 20 stupid project maybe ???
Top 20 Arduino Winding Machines
Finger cutting machines
Yea non of these make sense to use for anything.
Label dispenser
nice wind
Useless projects...