@@brandedmcgowan9414 more than like his CEL is on because of fuel/air ratio and probably just needs a tune. Headers throw a CEL every time u install you have to take the upstream O2 sensors out
The first system sounds better now but it's really jacked up. It needs to be replaced from front to back. Because of that I picked a Flowmaster system on the second truck.
GM vehicles with warning lights. Shocking, lol. Magnaflow sounds a bit better. Flows are still too choppy. I'd love to see some Spintechs on this channel. Most of the people who go with Flows or Black Widows would be happier with Spintech, IMO.
Red truck needs two magnaflow bullet resonators before that muffler and it would sound better because when that muffler breaks in it’s going to be too raspy.
I need a tip here. Did a stage 3 tsp cam on a 2016 lt 5.3l chevy 1500. Got the long tube headers, 3 inch collectors. Got two 3inch to 5 inch hex tips done like the tips onnthe white truck. I want something deep amd loud at idle but throaty when u punch it. What mufflers/high flow cats/resonators should i be looking at? Thing also has the 6.2l intake and throttle body on it.
The magnaflow system sounds better but the quality of the welds and all is really shitty. The tips should have at least been brought to the bumpers as well.
Red truck should’ve spent some money on tires! 😂 those things just about slicks!
Facts😭
Should’ve finished his lift kit while he’s at it
@@Constabruity right!
And that piping from MF looked pinched on the turn
I don’t like the drone but bald tires I’m good with…..wtf lol
Finally some non-catted vids!
Looks like Ray Charles welded the old pipe on the red truck that's bad lol
That's a signature weld of the Hackaddicts! Bird shit welds to the max!
@@BobSmith-mc7uq funny how there quick to say it's not there welds lol
@@bigsmith7349 I caught that.
The white truck is perfect.
After running the chambered mufflers for a while I’m liking the sound of straight through mufflers more
Anyone else notice the white one only had 2200 miles? 😳
With a CEL on too
@@brandedmcgowan9414 more than like his CEL is on because of fuel/air ratio and probably just needs a tune. Headers throw a CEL every time u install you have to take the upstream O2 sensors out
@@deuce7258 🤔👍
betting he had put a new dash in it.. that truck had lots of miles on it
Perfect example of how cat converters kill the sound cause those wasn't small mufflers
Love the way the Flowmaster sounds, it’s beautiful!
Glad you like it!
I love your roundabout ways of saying “those aren’t our $hitty welds” 😂
Both sound good. Both had some dash/warning/service lights on. 😮
That’s GM at that age the E Val system fails. I know I have one.
@@MBenz1984 Not necessarily of "that age". My 2016 Colorado threw a CEL and it was a valve in the evap system. A newer GM with around 50K miles.
I’m talking 16800
I’m not sure on the white one but the red truck sounds like it has a BTR Truck Norris cam in it.
Red one had a nice chop
I had to sub because every time I google something you guys pop up lol great content thanks!
Was that a hole in the exhaust at 0:26 ??
Red one sounds nice. Good idle too
The red Sliverado pickup with the Mangflow exhaust system for the win.
Needed the next size up in a muffler. 5x11x22 muffler would of sounded perfect. That 5x8x18 is going to get louder and sound too raspy without cats
The first system sounds better now but it's really jacked up. It needs to be replaced from front to back. Because of that I picked a Flowmaster system on the second truck.
The red one would’ve been better off with magnapacks instead of the dual in/dual our muffler
What about the damn hole in the pipes ? No talk about that ?
GM vehicles with warning lights. Shocking, lol. Magnaflow sounds a bit better. Flows are still too choppy. I'd love to see some Spintechs on this channel. Most of the people who go with Flows or Black Widows would be happier with Spintech, IMO.
Agreed!
lights or death wobble?
Got to hear them revving in neutral so the redline sound can take a toll
Should have plugged that massive hole before the muffler on the red truck...
I don’t think I would like towing long distances with these, I think a borla touring would sound better to me, but I like this on someone else’s truck
for both trucks, you should've put the quietest exhaust that police cars use. both of them to put it clearly. If he didn't 5:49 want it loud.
Flowmaster sounds more thunderous
White truck brand new basically no mileage
Must be a lot of good sounding trucks in Tennessee
Red truck needs two magnaflow bullet resonators before that muffler and it would sound better because when that muffler breaks in it’s going to be too raspy.
I need a tip here. Did a stage 3 tsp cam on a 2016 lt 5.3l chevy 1500. Got the long tube headers, 3 inch collectors. Got two 3inch to 5 inch hex tips done like the tips onnthe white truck. I want something deep amd loud at idle but throaty when u punch it. What mufflers/high flow cats/resonators should i be looking at? Thing also has the 6.2l intake and throttle body on it.
The red one sounds a bit better than the white one in my opinion
Needs the next size up magnaflow muffler
When he said the tips where jacked up im thinking what it's jscked yp on that truck. 🤦🏼
Beast mode 💪
I like the red truck what Cammed setup is in the red Silverado
White truck needs severe driver mod bad... he got scared lmao 🤣 wow
Anyone notice how many miles one of the trucks has 😭 2k is wild
Are the headers 3/4 or 7/8 or somthing wlse
Do the size of the tips cause the sounds to be different?
I wonder what kinda cam that red truck had
Why the check engine light on? Lol 😂. Get a sensor simulator for $50
Are these trucks Cammed? They sound like it
The magnaflow system sounds better but the quality of the welds and all is really shitty. The tips should have at least been brought to the bumpers as well.
Red Z will drone bad!
Truck at 5:02 cammed
MENGA MINT!!!!!
why does the red one idle down so slowly
Probably because of something called a dash pot. Heavy flywheel. Heavy pulleys. Heavy con rods, pistons, everything lol
12490