My buddy has an 04 Silverado that was in a rollover, he sawed off the tops of the cab and made a convertible to go ripping through the woods on. That day we rode around in it was the day I swore that I’d get my hands on a Chevy for my own, because he was beating the ever-loving sh*t out of it and it never skipped a beat.
I’m not proud to admit that I had a oil cooler gasket leaking by the oil filter and had a bunch of insane crap happening in my life and I stopped checking my oil level for a long time, almost like it was something that didn’t need to be done anymore. Obviously the first owner I bought my 2011 Chevy Silverado 5.3 Z71 must have made keeping the oil level at the correct level something he did religiously. Because my low oil level sensor doesn’t work probably because it never had to move the entire time he owned it . I had about a 173 thousand miles on my truck when while on the interstate my oil pressure went to 0 . With no extra oil in my truck anywhere and just have given my wife the debit card . I had no way to by oil. I had about 12 miles to go before reaching home. I decided to just push it all the way home doing my best to not get stopped at any red light, stop sign or in traffic. Got home and it was bone dry. Got oil and filled it up and about 75 thousand miles later still runs like a beast with absolutely 0 damage of any kind that I can find and remember it’s a AFM ENGINE
This video was meant for me, I just recently got my first vehicle which just so happens to be a 1999 Chevy Silverado 2500 gas, 5.3 v8 ls engine. This was an amazing, very informational video, thank you!
@@that_one5.349 @joogie, up there is the one saying he has a 2500 with the lm7 5.3 lol. I have a 2000 1500. He also is calling a vortec engine an ls. Big difference. Ls is aluminum you don't have a ls, you have a VORTEC.
Surprised these guys never talked about stall converters, gearing and intake manifolds, 5.3's really wake up in trucks with a stall and really short gears like 4.56's or 4.88's and I find it to be very pointless to cam any LS without an upgraded intake manifold too extend the rev range and more power obviously
@@DoctorRickSanchez not better for higher power applications the gears are too short makes traction impossible thats why most 6l80e guys swap for a 4 speed th400/4l80e. But its perfect for stock stroke NA guys.
👋99 Silverado. Was going to just buy a performance upgrade (460hp) engine for it, older buddy of mine told me he’d help me just build one, and for half the cost. So I’m gonna head to a junkyard and get a hood 5.3 block, have it machined, and build it up, learn on it so in the future when things break because they will, I won’t have to send it to a friend to be fixed. That and I don’t have to drop 5 grand straight out, I can take my time and drop yk 500 here and 200 there
I mean it’s cool to talk about all this but they didn’t talk much about utilizing the powerband of the engine. Gears,locker,stall converter and who tunes your vehicle makes a huge difference in the overall performance and utilization of the power you have.
I str8-up jorked my ‘01 5.3 power train by attempting to leave work with my parking brake on- I never used it before, and forgot I left it on, and let’s just my lead foot didn’t help. Shits still tops at 100mph, redline.
Thanks, been looking for this answer, I have a 2014 GMC Sierra all terrain with the 5.3 and looking for easy power, it already moves pretty decent for a 4x4 with stock motor.
Had a 5.3 sold it running like a champ with 225,000 miles and had a lq4 6.0 sold that with 245,000 still running idk why most folks have so many issues these engines are as good as a 4 bolt main otherwise its lsx or a good old duramax now that's a ride stock theyll walk the dog on a pullin sled point 9f my story if u ain't got any of these motors your wasting money 🤣🤣🤣
I have '12 Gen IV. I'm hoping keeping clean oil in it and a Range ODBII delete will keep it from dropping a lifter. The first mod should be AFM delete.
I have a 2011 chevy suburban 1500 lt which carries a 5.3l LMG. I'm trying to figure out what is the best way to get 400hp and 420tq at the flywheel. I'm in the process of installing a 3.42 gear set.... any recommendations?
Why would my 5.3 Z71 rado pop a knock out of thin air right after i filled my tank it happened and to be honest now that I think about it my gas tank wouldn't take no more then 2 notches past 3 quarters of a tank... Should any be able to help me I just bought this truck yesterday and it never sounded like a 12v diesel till last night I'm hoping it's just bad gas and not total engine failure
I love the sound the cold air intake makes, I had an AFE cold air in my 2015 silverado with the 5.3, while I was literally 100 miles in the middle of nowhere in the mountains at 6000 ft elevation the cold air intake ripped off the throttle body, I have yet to see a property built cai, the factory cai is designed to articulate when the engine moves around, especially off road, I took it back and got my money back, I noticed slight higher top end but low end was less..
I want more power to not drop to 35 mph on towing up a mountain. What will help ? Got a 3.5, with a 4l60e. Cheap,? Have a big trans cooler. 04. Got rear towing shock/springs. Which helps. Engine and trans ... help. Only has 102000 on it. Trailers sometimes at max ,but only going 200 miles. I don't break 3rd till the Arbuckle mountains for around 40 miles. .wishing had the bigger trans.. hard to find
How do I add more low end torque? Already put a stage 2 cam, AFM delete, LS lifters, upgraded valve springs, push rods, long tube headers, cold air, flow master exhaust, but I still really wish I had more towing power.
@@victorbenitez8507 Yeah man you’re right. I upgraded to 4.11 gears and that made a pretty big difference but I still wouldn’t be hauling 5 tons of rocks in a dump trailer with this truck. Looking forward to having a turbo diesel one day but at least I have a pretty cool gasser for now.
They are reliable. Mine had lifter tickle noise around 120k after a long ten minute idle. Drove it another 50k till the lifters noise was annoying me. got a low oil pressure warning months ago. I just rebuilt the whole thing before oil pump goes out. i don’t race or abuse it. Great transportation. Hope to keep it longer.
Thanks just bought a 2001 silverado off a neighbor who had abandoned it in his driveway needs a lil TLC but alot cheaper than a new one with the money I saved i want to hook up the engine what should I start with 1st high mileage but runs solid?
They were great, until they added AFM to the 5.3. Took good care of that truck and it was great to 90k, then I couldn't keep the lifters from dropping.
@@ryandaigle7867 as far as i know, thats all he did. And the slip said 11.47 at 118 mph. Its pretty hard for me to believe too. Must have been one hell of a cam i guess
I have a 2000 Z71 1500 that is my pride and joy. I'm pulling the engine out to freshen it up and make some repairs. Is there a realistic way for me to make a decent amount of power and still be reliable enough to drive cross country?
@@gradyrooks5846 dont bore out to a 6.2 the power difference is negligible if anything put 6.2 heads on it with any size cam it will do just as good as any 6.2 if you want more displacement look into strokers, more power turbo.
What can I do for a basic horsepower on my 5.3 Chevy Tahoe LS for hauling like camper trailers car haulers stuff like that and a daily driver but I really do want more horsepower without the NOS and turbo or supercharger even though supercharger is an idea
I have a cold air intake and a smaller muffler on my silverado. I felt some differences after doing those modifications, but I feel like it's still lacking power. Will I need a tuner as well? If so, what do you recommend?
I wanna make my 5.3 Chevy avalanche vortex motor off road u should make a video on that never seen a Chevy off road I wanna do it to mine it’s just so hard to find out where to start
You talk about adding power but forget to mention their transmissions are made of glass. The 4l60E trans is fine as long as you don’t tow, abuse, or add any extra power to it.
I’ve been towing rocks, dirt, entire trees, and a tractor in a 16’ caged landscaping trailer with my 5.3, 4l60 for 6 years. Cammed it, headers, cold air, etc. Still cherry.
At 3:16. That is an overhead cam? A 5.3 is a pushrod engine. If you are explaining how a 5.3 camshaft works to the uninitiated, you are confusing them.
Start Your Performance Truck Build! bit.ly/3qujUXL
Hey is 5.3L a Ls Engine if so could you explain How?🤔
@@PoppaLaca1957 the older ones are the new ones are L85’s
Can you do the 8.1
Can you email me just have questions w my 5.3 if you get time thanks man
That afm delete is a bummer
My buddy has an 04 Silverado that was in a rollover, he sawed off the tops of the cab and made a convertible to go ripping through the woods on. That day we rode around in it was the day I swore that I’d get my hands on a Chevy for my own, because he was beating the ever-loving sh*t out of it and it never skipped a beat.
I had a 06 gmc and holy shit they're fun when you straight pipe them with long tube headers fuck I miss that truck
I drive an 03 Silverado and for the last year I’ve been driving it with a blown head gasket so when the man says bullet proof believe it 😂
I’m not proud to admit that I had a oil cooler gasket leaking by the oil filter and had a bunch of insane crap happening in my life and I stopped checking my oil level for a long time, almost like it was something that didn’t need to be done anymore. Obviously the first owner I bought my 2011 Chevy Silverado 5.3 Z71 must have made keeping the oil level at the correct level something he did religiously. Because my low oil level sensor doesn’t work probably because it never had to move the entire time he owned it . I had about a 173 thousand miles on my truck when while on the interstate my oil pressure went to 0 . With no extra oil in my truck anywhere and just have given my wife the debit card . I had no way to by oil. I had about 12 miles to go before reaching home. I decided to just push it all the way home doing my best to not get stopped at any red light, stop sign or in traffic. Got home and it was bone dry. Got oil and filled it up and about 75 thousand miles later still runs like a beast with absolutely 0 damage of any kind that I can find and remember it’s a AFM ENGINE
Just got me an 01 2500HD with a 6.0L and I’m excited to start getting some power out of that thing! Thanks for the video!
This video was meant for me, I just recently got my first vehicle which just so happens to be a 1999 Chevy Silverado 2500 gas, 5.3 v8 ls engine. This was an amazing, very informational video, thank you!
Congrats on the new truck man. I just got mine a few months ago and it’s got 300000 miles on it and I just had to replace the rear diff.
If it's a 99 2500 that should have the 6.0 engine
@@MG-ol3no lm7 is 5.3, 2500s are not 5.3s. My truck is an lm7 5.3.
@@that_one5.349 @joogie, up there is the one saying he has a 2500 with the lm7 5.3 lol. I have a 2000 1500. He also is calling a vortec engine an ls. Big difference. Ls is aluminum you don't have a ls, you have a VORTEC.
@@MG-ol3noDon't be that guy.
Surprised these guys never talked about stall converters, gearing and intake manifolds, 5.3's really wake up in trucks with a stall and really short gears like 4.56's or 4.88's and I find it to be very pointless to cam any LS without an upgraded intake manifold too extend the rev range and more power obviously
Agreed 4.11 with a 3200 circle d stall.
@@thatleov Im getting a stage 4 summit cam 3k stall and 4.11 gears but I don’t even know how much hp it’ll make
@@lucidops4565 what motor
@@lucidops4565 gen3-340 gen4-360 gen5-380 somewhere around there if your on stock heads/intake with a 5.3.
@@lucidops4565 enough to a smile on your face !!!!
Just got a 2011 1500 5.3 this is perfect
Thanks!
Don’t forget to either upgrade or build your 4l60e or 4l80 swap it 😂 I’m on my third tranny
6l80 way better
Yes, the 4l60's are trash
On my 2nd in my Silverado but I beat the hell out of 6l80e in my avalanche
@@DoctorRickSanchez not better for higher power applications the gears are too short makes traction impossible thats why most 6l80e guys swap for a 4 speed th400/4l80e. But its perfect for stock stroke NA guys.
That’s my entire plan lmao wait till I Grenade my 4L60 and drop in a 4L80😂
I tow big sheds with my half ton chevy 2010 and 2004. Still going.
👋99 Silverado. Was going to just buy a performance upgrade (460hp) engine for it, older buddy of mine told me he’d help me just build one, and for half the cost. So I’m gonna head to a junkyard and get a hood 5.3 block, have it machined, and build it up, learn on it so in the future when things break because they will, I won’t have to send it to a friend to be fixed. That and I don’t have to drop 5 grand straight out, I can take my time and drop yk 500 here and 200 there
Hell ya that’s the way to do it
Why waste the money? Just run the junkyard motor as is. The gen IV stuff is bulletproof SBE.
I mean it’s cool to talk about all this but they didn’t talk much about utilizing the powerband of the engine. Gears,locker,stall converter and who tunes your vehicle makes a huge difference in the overall performance and utilization of the power you have.
That's good to here might put one in my 62 Chevy instead of the engine it has now
LS all day, lol 🤌
I str8-up jorked my ‘01 5.3 power train by attempting to leave work with my parking brake on- I never used it before, and forgot I left it on, and let’s just my lead foot didn’t help. Shits still tops at 100mph, redline.
Literally just cut my muffler off today!!!...I'm that guy lmao 🤣 🤣 🤣 🤣
Tbh when the cut muffler 5.3 sounds better than a full exhuast system then why waste the grand on it? Yeet it!
The very best mod for a 5.3 14 and newer is a tune from Trifecta, trust me!! Awesome 👍👍
Thanks, been looking for this answer, I have a 2014 GMC Sierra all terrain with the 5.3 and looking for easy power, it already moves pretty decent for a 4x4 with stock motor.
I just got my first broke lifter assessing damge tommorow looking into this video since im already in the enigine
I've got a 08 with AFM deleted, FiTech intake manifold, 102mm throttle body, cold air intake, 50lb/hr injectors, stage 3cam, forged pistons, a 150shot of nitrous
Hp?
Had a 5.3 sold it running like a champ with 225,000 miles and had a lq4 6.0 sold that with 245,000 still running idk why most folks have so many issues these engines are as good as a 4 bolt main otherwise its lsx or a good old duramax now that's a ride stock theyll walk the dog on a pullin sled point 9f my story if u ain't got any of these motors your wasting money 🤣🤣🤣
I have '12 Gen IV. I'm hoping keeping clean oil in it and a Range ODBII delete will keep it from dropping a lifter. The first mod should be AFM delete.
That was the first thing I did
What about Go-Fast stickers?
I gave you a like cause u mentioned Fast and Furious movie 👍
getting a 5.3 avalanche 4x4 and plan on getting some basic bolt ons with a k&n intake in due time
i have a 03 cateye with a 5.3 LS and a cherry bomb muffler, i pretty much have everything in this video except a turbo and nas
Ive been looking for a video like this for weeks
Hell! Even the 4.3 vortec was a hella engine even stock.
I never rode I'm one but they did sound good.
@@mothmanmothman4909 I had one in a small gmc & it was more than enough power
Don't forget the 4.2 Vortec!
I’ve had both, 5.3 has 3 times more power, but my s10 4.3 was basically blown up.
Most of this also applies to 4.8s and 6.0s
It applies to most engines out there.
Mmmmmm 6.2s too
I just thought of a sick build. 96 Tahoe 2door with the 5.3. Lowered. Big wheels. Black out
2door Tahoe in any build gets a win in my book!
I'll be doing that to my 96, don't have the 2dr and not lowering it, but it'll do
Why
That's not very unique.. Google it. They're everywhere.. although they do look damn good that way. 💪🏻
What kind of cams do you guys recommend if i have a 5.7 L 350 vortec?? I have kand n intake system jba headers magnaflow exhaust so far
I am definitely that guy🙃 2:40 But not for long I’m about to do a fender exit
I have a 2011 chevy suburban 1500 lt which carries a 5.3l LMG. I'm trying to figure out what is the best way to get 400hp and 420tq at the flywheel. I'm in the process of installing a 3.42 gear set.... any recommendations?
what’s the best exhaust system for 07-13 GM 5.3’s
True duals lol
If your just gunna keep the motor stock just a nice muffler would be great, watch some sound videos and see what you like.
True duals are to loud but with a x pipe they sound amazing. It really starts clapping only in the high rpms
Im running carven exhaust and i love it just perfect loud when needed a bit quiet when just crusing
Why would my 5.3 Z71 rado pop a knock out of thin air right after i filled my tank it happened and to be honest now that I think about it my gas tank wouldn't take no more then 2 notches past 3 quarters of a tank... Should any be able to help me I just bought this truck yesterday and it never sounded like a 12v diesel till last night I'm hoping it's just bad gas and not total engine failure
Long tube headers with cold air intake on a 5.3 gmc Sierra. What size cam would you recommend
I love the sound the cold air intake makes, I had an AFE cold air in my 2015 silverado with the 5.3, while I was literally 100 miles in the middle of nowhere in the mountains at 6000 ft elevation the cold air intake ripped off the throttle body, I have yet to see a property built cai, the factory cai is designed to articulate when the engine moves around, especially off road, I took it back and got my money back, I noticed slight higher top end but low end was less..
Owned one for years, they should make tank armor out of this engine
Damn that Banker comment came at my throat… granted I’m gonna straight pipe it to side exit but for now, I am that guy😢
Day 3 of saying Dustin has pretty eyes until it's mentioned in a video
Have they mentioned it yet
@@basco5690 idk
@@sagmondo8235ask
Dustin needs to turn him self in this is the FBI he’s wanted for serial sodomy
what about 5.7L upgrades? are the about the same?
LOVE MY VORTEC
what are you thoughts on getting a 5.3L chevy avalanche staight piped duals into y pipe 2.25 tail pipes into 5 inch tips
Got a 2012 silverado 5.3 stage 2 tsp cam, long tube headers,x pipe,3:73 gears, on e85. Not sure what i should do to it next any ideas?
Hula dancer on dash
I want more power to not drop to 35 mph on towing up a mountain. What will help ? Got a 3.5, with a 4l60e. Cheap,? Have a big trans cooler. 04. Got rear towing shock/springs. Which helps. Engine and trans ... help. Only has 102000 on it. Trailers sometimes at max ,but only going 200 miles. I don't break 3rd till the Arbuckle mountains for around 40 miles. .wishing had the bigger trans.. hard to find
What about the 5.7? I’ve got edelbrock heads, comp cam and new rods going in mine plus a set of hooker headers and a three inch quad exhaust
How do I add more low end torque? Already put a stage 2 cam, AFM delete, LS lifters, upgraded valve springs, push rods, long tube headers, cold air, flow master exhaust, but I still really wish I had more towing power.
for more towing u might need a 2500, or 6.0, these 5.3’s have reliable towing even with mods but a higher liter is always better for towing.
@@victorbenitez8507 Yeah man you’re right. I upgraded to 4.11 gears and that made a pretty big difference but I still wouldn’t be hauling 5 tons of rocks in a dump trailer with this truck. Looking forward to having a turbo diesel one day but at least I have a pretty cool gasser for now.
Can removing everything factory and allow more air ratio better for engine?
Did they make any 2012 3/4 ton with 5.3 engines?
Gotta stage 2 cam in my 08 woth 8” kit and 35s and it’ll get down with the get down 😂
Hell yeah!
I would love to see this. I want to add a cam to my build
The 4.8 with no muffler sounds great just don’t cut the cat off and you’re fine
I just bought an 06 silverado with a 5.3 vortec. My first truck for work. Did I make an ok decision? Has around 105k on it. Are they reliable?
You take care of it, and it’ll take care of you!
They are reliable. Mine had lifter tickle noise around 120k after a long ten minute idle. Drove it another 50k till the lifters noise was annoying me. got a low oil pressure warning months ago. I just rebuilt the whole thing before oil pump goes out. i don’t race or abuse it. Great transportation. Hope to keep it longer.
Thanks just bought a 2001 silverado off a neighbor who had abandoned it in his driveway needs a lil TLC but alot cheaper than a new one with the money I saved i want to hook up the engine what should I start with 1st high mileage but runs solid?
Hell yeah!
The first mod should be an AFM delete. 🙊. Now, if you got cash that's when you can also go ahead and beef up your Cam shaft and other parts.
Why would Chevy do that to us
Got a flowmaster 40 series on my 2003 tahoe, need to run the exhaust over the axel and out at a 45 on both sides
Throttle body spacer to compliment all others listed.
How easy is it for a rook to install new headers on a 2018 Silverado 1500 LTZ? Mine is a 5.3L V8 as well.
I'm no mechanic but like to try installing my own sh!t
Shouldn't be to bad, few bolts, just gotta go easy as to not snap bolts/studs in the heads
They were great, until they added AFM to the 5.3. Took good care of that truck and it was great to 90k, then I couldn't keep the lifters from dropping.
$200 OBD adapter can remove it in seconds
@@Feldanin I had the Range AFM disabler installed long before having lifter issues, problem is the lifters still fail.
I did a full afm delete. New valley cover plate, ls7 lifters, new non afm cam. Haven’t had problems since
@@L.King2215 the same ended up solving the issue for me too
@@L.King2215 what was the cost on that
Let’s us not forget about some fuzzy dice!
I got a friend that put a cam, cold air, and exhaust in his 5.3. He ran a 11.5 in the quarter.
i doubt that.
@@ryandaigle7867 as far as i know, thats all he did. And the slip said 11.47 at 118 mph. Its pretty hard for me to believe too. Must have been one hell of a cam i guess
@@ryandaigle7867 hoes mad lol stop hatin
for N/A how much do you think for everything besides adding boost
I have a 2000 Z71 1500 that is my pride and joy. I'm pulling the engine out to freshen it up and make some repairs. Is there a realistic way for me to make a decent amount of power and still be reliable enough to drive cross country?
My 2000 has 270000 mi. I don’t want to tear into it because it just keeps running.
Do a video for a 5.7 Vortex engine please 🙏
The info for that engine would be exactly the same as in this video. Just don't ever nos.
Probably need a better drive line too. I was told my 08 silverado stock driveline is crap. And will fail if I try to add more power then I have..
U should do this for the gm 6.0 I never see videos on the engine and wonder things I should be doing to my 2500hd
The same as the 5.3 cams exhaust tuners it handles it even better in my opinion and maybe if you have the money bore it out to a 6.2
Literally same as 5.3 just more engine
@@gradyrooks5846 dont bore out to a 6.2 the power difference is negligible if anything put 6.2 heads on it with any size cam it will do just as good as any 6.2 if you want more displacement look into strokers, more power turbo.
Hey I made the video!!!
Do this for the 5.7 hemi
I’ve heard the 4.7 can put out close to the 5.7 for the price? But yah can’t beat the hemi 🤘
@@WS1_AUTOS_N_STUFF don't do it 5.7 is trash trust Mr I've had 2
@@liquidcr4p87 🤘people have told me that 4.7 does pretty good with power and better fuel mileage
@@liquidcr4p87I’ve had three since 2009, no issues with any of them except wheel bearings
Dustin you already know I am that guy lmao, mufflers been gone since like week 2 lol
What manifatture u recamend on header and manifold
Wow your videos are awesome
🤘 appreciate it!
I ran my 5.3 on no oil. that didn’t end as well as it did for grant tho😅
Cam shaft cost like $3000 installed and tuned for like 100 hp that’s worth it.
1500 if u do the labor
I’m putting one in my Porsche
My dad and I are building a 55 Belair with a 5.3 LS1
My 5.3 has ticking!😁
was the beginning from waynes world? been so long since I seen it im not sure.
Thank you
You got sum perty eyes boy……in my best sling blade voice
Do these also apply to a 4.8 v8 gm motor?
The 4.8 can definitely benefit from these mods too! Some parts are motor specific, but the 5.3 and 4.8 are almost identical. -Fuller
Haven't watched vid. But top 3 would be cam, 3000 stall converter, regear and of course a dyno tune
Do this video for the 6.6!
I have a 2008 suburban z71 5.3L. is that an LS?
Should hit on the 4.8 sometime
4.8L+ a turbo setup is the sauce I know that much 😎 - Rainey
@General Motarz Except they aren't the same
Why? It’s less than the 5.3 just get the 5.3 or higher why purposely buy a weaker vehicle
@@JameGoFast27 🤣🤣🤣
@@JameGoFast27 Also don't talk to me about having a weaker vehicle when I also have a couple Duramaxes and a Cummins or 2.
2:40 🙋🏼♂️I’m that guy
What can I do for a basic horsepower on my 5.3 Chevy Tahoe LS for hauling like camper trailers car haulers stuff like that and a daily driver but I really do want more horsepower without the NOS and turbo or supercharger even though supercharger is an idea
You can upgrade the headers and camshaft.
I have a 2019 RST that I’m bored with. It’s well beyond warranty. Fully paid for. Only has 32k miles on it. Maybe it’s time for some power additions.
Lift it you will love it
Long tube headers or short tube headers?
Does all this go for a LT vortec 5.3 too??
Yup
I have a cold air intake and a smaller muffler on my silverado. I felt some differences after doing those modifications, but I feel like it's still lacking power. Will I need a tuner as well? If so, what do you recommend?
I mean you can tune it but without supporting mods, you won't see much improvement.
I wanna make my 5.3 Chevy avalanche vortex motor off road u should make a video on that never seen a Chevy off road I wanna do it to mine it’s just so hard to find out where to start
You talk about adding power but forget to mention their transmissions are made of glass. The 4l60E trans is fine as long as you don’t tow, abuse, or add any extra power to it.
I’ve been towing rocks, dirt, entire trees, and a tractor in a 16’ caged landscaping trailer with my 5.3, 4l60 for 6 years. Cammed it, headers, cold air, etc. Still cherry.
@@ricksmash8080 guaranteed ticking time bomb.
@@JohnDoe-ud2cc I expect it to go out one day. Been expecting it for a long time now 😂
any opinions on tuning a 5.3 to delete the AFM?
Do it, worth it
@@CustomOffsetsTV what about the Range plug in module?
@@johnnymartinez305 works like a charm
@@johnnymartinez305 I've used it for years on mine, works great haven't had any side effects
@@arceusex did you also change lifters and valley plate ? Etc
At 3:16. That is an overhead cam? A 5.3 is a pushrod engine. If you are explaining how a 5.3 camshaft works to the uninitiated, you are confusing them.
Yall should do this video but for the 5.0 coyote
2:35 i feel targeted☹️😂
I recently got a beater silverado
I want to build this one up But I really got no idea where to start can anyone help ?
Pretty sure Dustin is a Viking
Does anyone know if they make turbos for 08 Tahoe's 5.3 vortec engines
Cries in 4.8 🥲
4.8's take boost really.... really well
What about the L86 6.2?
Caming a 5.3 is some genuine shit if you can do it 100% worth it
I’m being that guy until I find a pipe for my new muffler lol