Peugeot Partner 1.6hdi EGR Valve Cleaning P00BC Air Flow Too Low
HTML-код
- Опубликовано: 24 авг 2024
- here we use launch dpf cleaning fluid to clean an EGR after the part was incorrect we decided to clean it.
Buy Launch cleaning fluid here...
www.launchtech...
Remember the good old days when engines were easy to work on, loads of room around them and you could even see the ground under the engine bay???? It's an ordeal just removing stuff to get at the part you actually want to work on with modern engines.
Excellent video that actually tells you where things are...
Thanks
GREAT VIDEO IVE GOT PEUGEOT 208 E-HDI I GOT PROBLEMS CODE ON THE DASH P1445 CODE AND TURBO BOOST SENSER PROBLEM TOO ONLY JUST BOUGHT THIS CAR BUT LOVE YOUR VIDEOS
nice one jimmy !
the EGR is a serviceable item, these HDI 1.4 & 1.6 are a nightmare to get to the EGR, I had a landrover with a BMW engine the EGR was right in front of you, two bolts and it was off, took 5 minutes to take it off so it could be cleaned properly in the kitchen sink, Citroen's designers are not mechanics that's for sure, probably computer whizzkid who never done an oil change. . .
It's deliberately done so you have to take it back to them.
My van is doing the exact same
I got a P2413 fault.code! Changed new egr, relearned with ecu. 10mins of running same code throws up??
Hi Jimmy,
Whats your opinion on diesel additives into tank.
Additive description says cleans injectors, fuel lines, soot and so on.
Surprised the engine didn't go full bore when it sucks that brake cleaner into the air intake at start up.
The valve is closed 👍🏻
Now try this on a c3 picasso, NO ROOM at all.
can bad cloaked egr be cause for jerks /hiccups in driving
Is it the same process on a o7 plate 1.6 HDI partner
Hi there
My berlingo throws an engine check light when it gets colder and once warmer it goes off. Any ideas. Performance with no issues despite the eml. The only code is PO243 turbo solenoid wastgate A to low.
Any suggestions please?
WITH WHAT TORQUE IN Nm? tighten the EGR pins BECAUSE I TAKE CARE OF THIS - AS SOMEONE WOULD OFFER 12 Nm for the tightening torque?
Would it be expensive in a garage
How is to clean the egr valve, citroen c4 grand picasso, 1.6 diesel?
Is there any way that I can tell if the valve is closed before cleaning?
When you clean the valve , do you not clean the pipe going back to the inlet manifold?
I believe it's that pipe he removed and cleaned with DPF cleaner?
WE ARE GOING BACKWARDS WITH ALL THIS ELECTRICAL NONSENSE