2005 Honda VTX 1800 Oil Change | Partzilla.com
HTML-код
- Опубликовано: 11 сен 2024
- Buy the parts for your Honda VTX 1800 oil and filter change here:
bit.ly/vtx-oil-...
John shows you how to perform an oil change on a 2005 Honda VTX 1800. In the video, see how to find both drain plugs underneath the motor and how to locate the oil filter. John replaces the oil with Honda synthetic oil and replaces the filter with an OEM filter as well.
Read how to do this job step by step: www.partzilla....
Spongy brakes? When's the last time you bled them? Find out how to bleed the brakes on your VTX here: • How to Bleed the Brake...
VIDEO HIGHLIGHTS:
Tools you’ll need - 0:30
Removing drain plugs 1:10
Removing and replacing the oil filter - 1:50
Refilling the oil - 3:15
Buy OEM Honda motorcycle parts here:
www.partzilla.c...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2005 Honda VTX 1800. You may have similar steps on your machine. If you’re not sure whether these steps apply to your vehicle, leave a comment and we’ll get back to you.
RELATED CONTENT:
Air filter change on a Honda VTX 1800
• 2005 Honda VTX 1800 Ai...
I just bought my 2003 Honda VTX 1800 with 3300 miles on it yes that’s correct 3300 miles on it haha I got a heck of a deal and I just want to thank you guys!! I’ll be running through my bike getting her ready for this summer.
Oil change
Spark plugs
Air filter
Break bleed
Wow, nice :D I'm about to do my 1st change on an 03" 1800, but it's got over 25k on her, I can only *hope* she was treated well. You are in a great situation to birth a Unicorn, seems like you're doing all the right stuff too!
Thank you! I didn't realize there were TWO drain plugs!
You are not alone.
I like all your videos on the VTX I have the 05 I would like to see you make a video of tuning it up thank you
I'll 2nd that
I use Amsoil motorcycle 10w 40 in my 06 VTX 1800F, really has served me well these past 12 years.
And it doesn’t use any? I’ve always been nervous to switch to 10w40 since Honda recommends 10w30
@@scottg429 Doesn’t use a drop of oil.
Good video! I’d like to point out however that the owners manual calls for anywhere from 3.7 quarts to 3.9 quarts. I use K&N oil filter part number HP 1010. It’s a little bit longer than the factory style oil filter which means you can pour in 4 quarts even and you’re good to go. You will have to remove the bolts for the coolant reservoir to create enough room to install the filter. No you do not have to remove the coolant reservoir, we just have to move it a little bit and bolt it back on. I’ve been running mobile one with the HP 1010 oil filter for five years. 150 thousand miles on my machine and it still hauls balls. LOL!
Wow, that is very inspiring to hear :D I'm doing my first change on an 03' 1800. Do you use Semi, or full synthetic? Since you're obviously doing something right, I think it's wise to get tips from people that are in your position.
Thanks John. Seems simple enough for an ole Army mechanic to do.
Thanks for the video. Finally got my 18! YAY
Anyway, totally blown away by the 2 drain plug thing. Thanks for help in avoiding rookie mistakes.
Is there something particular about Honda oil vs Ams, Bel Ray, etc?
sounds like that vtx has a weak battery too. Love my VTX...got mine when they first came out in 02!! Love that thing, and still have it.
Love my 02 1800S 51,000 miles runs like new looks like new still too
I've a good 2002 1800-c, I farmed my father and i with a 46 John Deere G model. 2 cylinders also. Torque monsters both.
The manual for my 2005 r says drain oil with bike on the side stand to get all old oil out, back upright to fill and check. I checked and this is true.
Terry Pasquali Use KNN oil filter HP 1010 and run 4 quarts even and you’re good to go
2003 honda vdx 1800c map sensor, location, hose ? electric plug, cleaning
Just placed my order. Thanks John!
Excellent, I was looking for the oil mark and you show it, no body show the mark on the stick.
Good video. First bike, or any vehicle I've seen with two oil drain plugs.
This is my 2nd. I had a 50k mile 1995 Mustang GT 5.0 engine last year that had 2 drain plugs
I watch your videos and then go look at y bike and its completely different. My bike is an 02. Wish you had videos for the 02.
My 2006 1800r manual says drain the oil on the side stand to get it all out and check the oil with the bike straight up. I proved this to myself by draining oil while bike was centered on a lift then putting it down on the side stand and getting more oil out. Even the pros should stop and review the manual.
Partzilla, Please clarify whether synthetic oil is bad for the clutch on VTX 1800. Thank you!
Thank you!
so on my 02 vtx 1800c you don't screw the dipstick in you just touch down on the crankcase and lift?to check the oil level.
How often do I have to do the oil change on my 05 vtx 1800?
Hello!! My 2002 Honda VTX 1800C has the same ignition, it starts fine, it kinda dips, then the sound stabilizes and it starts, exactly as it started in the video at 0:43...is that normal? Thank you! Great video!!
So which mark is the full mark, the line in the middle or top of the fat where it starts to go round again? New to these bikes
With the oil and filter-change kits, i see have come with 4 quarts and 1 crush washer. Shouldn't the kit for the 1800s have 2 crush washers included instead of just one since they have 2 drain plugs?
Great video. Thanks.
How easy is this to do with the bike on the ground on the kickstand assuming I don’t use a wrench?
Thank you so much Sir
do you check the oil on the stand or standing up
Would a low oil level, cause it to not downshift thru 3,2, and 1st? Till you jiggle the heel your shifter
great video thank you
Anytime, Jose!
Thank you sir
Where did you get the motorcycle lift from or what’s it called
Hey
What color is the oil sensor wire and would u have diagram on how to hook a fuel gauge tachometer up for a 2002 Honda VTX 1800c
Or is there a signal wire coming from the oil pressure switch
Thanks I've been reading online like crazy looking for the right oil or filter and you just simplify things. I'm ordering and doing it as soon as I get my order in. One questions the drain bolt washers have to be replace every oil change? Thanks
It is recommended. The crush washers are considered disposable.
Partzilla Hey John I just did my oil change and it was a piece of cake following your instructions. I did had to lay on the floor since I don't have a jack but it is as fun. Keep up the good videos.
Thank you for this instruction. I may look to you for parts when it comes time for my change. I'm curious, I can't remember what the manual says, but I thought Honda mentions to check the oil with the side stand down. Is that incorrect? Thanks.
You should check the oil when the bike is upright. Not on sidestand, according to Honda.
Nice job man. Hey, where ya get those triangle shape covers over spark plugs, I'd like to get me some. Thanks for posting.
Not sure, they were on the bike already.
Hey Sir, thanks a ton for these vids. Very helpful; quick question - is the procedure any different for the 2008 VTX 1800F? About to drop an order ;L)
Same situation
@@PartzillaParts Thank you, appreciate your response. Do you have a video on bleeding the clutch for a VTX 1800?
Proper way to turn off VTX engine.
Engine kill switch or Ignition Key?
It doesn't matter. They both cut off electricity to the ignition system. The kill switch is just a safety feature so you don't have to take your hand off the grip.
Is the 2002 the same as the 2005 as far as having 2 oil drain plugs?
Yes
When checking the oil level, does the bike have to be upright or can you still get an accurate reading if it's on the side stand?
Also, can this job be done without jacking up the bike? Or is it imperative I get some sort of lift?
On the VTX, the bike should be upright to check oil level. On the stand it will look over full. You don't have to jack the bike up, it just makes it easier.
Is it safe to use Lucas oil or a heavier weight non-synthetic oil my bike calls for synthetic but I'm not a fan of synthetic lol
semi-synthetic seems to be the popular vote, since reports of full synth causing slippage.
What weight oil do you recommend to prevent clutch from binding?
I've read that using full synthetic can cause clutch problems, but I'm still working that out as well, even though I have no clutch issues, I want to know everything I can to avoid these problems.
I used the 10w40 amd had slipping run 20w50 much better
what size is the filter wrench?
Google says 65mm
is it the same for the vtx1300? thxs
Yes. Same procedure.
For how many miles you car ride it?
Honda recommends changing oil every 4,000 miles.
what is that pipe in min 1:36?
The Radiator pipe?
Who takes a bike to a dealer to get their oil changed? WTF?!
Weak battery
Can't trust anyone into politics
get harley and forget about cheap ricecookers))
You might be on the wrong channel.
look at this fool, harley eyy? lol junk!
If u like to work on your bike buy Harley but if u like to ride buy a Honda.
I love rice
My rice cooker was a fraction of the cost and never had to take it to the shop fore any major repair I had a Harley and what happens took it to the shop fore major engine work it got sold still got the rice cooker had it since 2006 still running Awsome w no major repair