GDI Pressure Sensor Testing

GDI Pressure Sensor Testing
www.autodiagnos...
Normal PFI or port fuel injection pressures maximum range almost never will exceed 75 PSI. On GDI the nominal fuel pressure is usually about 2900 PSI. These high pressure will naturally employ fuel components that are much more roughed in construction. Common Rail Direct Injection pressure measurements can be made with a robust thin film titanium oxy-nitride pressure transducer architecture. Hermetically-sealed, all-welded stainless steel construction is used, and a variety of port and electrical connector options is employed, satisfying specific manufacturers.
Other GDI fuel pressure sensors employ advanced crystalline silicon MEMS strain gage technology. MEMS are related to semiconductors and integrated circuits, originally based on silicon wafer fabrication techniques, but adding space, and continuously variable output similar to analog devices. This type of technology, although started back in the 60's, was too difficult to manufacture, but now highly ... Get the whole story right here in this video... Enjoy...
Amazon Printed-Books & Kindle:
www.amazon.com/...
Google Play Android APPs:
play.google.co...
Amazon Video DVDs:
www.amazon.com/...
Barnes & Noble Nook:
www.barnesandno...
Apple iTunes iPad:
itunes.apple.co...

[@ADPTraining]

No, GDI is not the same as Diesel Piezoelectric injectors. Although they may start using PE injectors on GDI in the future. PE injectors are very expensive so manufacturers won't do it if they don't have to. Nominal voltage for GDI injectors (this is not standardized yet) is 60 to 70 volts, peak-and-hold pulse, 6 A, 5 A then 2.5 Amps. The current is varied depending on demand. I'll have an injector video posted soon. Stay tuned for more on GDI right on this channel. Thanks...

[@ADPTraining]

For the time being, I don't think anyone it's making them yet. These use higher voltage and it's too new for the market, although it could change right away.

[@user-nq1fg1ix1z]

La paz sea con usted. Soy árabe y necesito un gráfico suyo si se examinan los sensores en un automóvil dañado

[@ADPTraining]

Bien, escríbame por Email...
autodiagnosticsandpublishing.com

[@bric2661]

Thanks, ill keep a look out.

[@sivucit]

hi, what is GDI injector voltage level, is it around 80 to 120 votls, similar to Diesel engine injecotr voltage. Second how is this injector differ from Diesel peizo injecotr

[@sln2112]

Thanks for the info.God Bless your Bones,,,,

[@ADPTraining]

Thank you for posting... See more at my site.
autodiagnosticsandpublishing.com/

[@W.Khairi]

But do we know which is ground and which is signal when checking the sensor?

[@bric2661]

Hi, do you know where I could buy a GDI Injector Pulser?

[@alharonforcarselectronics9430]

Berry goog this is good exaplention

[@ADPTraining]

Thank you... autodiagnosticsandpublishing.com

[@alharonforcarselectronics9430]

@@ADPTraining I thank you so much♥️♥️

[@movingupautodiagnostics8645]

What would happen if the actual fuel psi is way above desired psi? Would the car start? plus, what can cause excesive psi?

[@ADPTraining]

These Piezo injectors work at 3000PSI Max, so doubtful if they go above. Fuel is pressurized by the cam on the HP-Pump.

[@abbyalbert2019]

nice video tech

[@ADPTraining]

Thanks