This is a known issue with a lot of the Kitty sets due to the way KAT tooling for the 7u bars is. If you purchased from CK, they issued an e-mail for you to request replacements. If you purchased from another vendor, I would contact them to request a replacement so the vendors can all request a replacement from Keyreative in a timely manner.
@@toocxnfident7846 cannon keys. Search it, the listing will show up. It sold out fast, but you can do email notifications. I just posted mr build on Reddit yesterday and about 20 ppl asked my the same question
sounds super wet. too much lube? don't like the sound of those lavenders. great video! love the new format that compares all different keycaps. great stuff! sub!
Typically the area lacking a plate is very soft and does not have loud typing sounds. It's also flexier since you're typing directly on the PCB and there's no plate to support the bottom out bounce back.
@@Minterly Ah okay, makes sense! Thanks for the super fast feedback btw! Figured I'm just gonna grab an extra PCB + half plate just in case it looks like ^^
The board actually doesn't take input since the JST connector lifted during the build... so I'm a dumdum and didn't check carefully while I was fake typing.
Actually the JST connector was lifted, then broken during the build, and since it's coming to GB so soon, I just filmed a sound test without fixing the board yet.
Moyu’s are definitely really good! I haven’t tried them or the snow white switches personally, but a lot of the sound tests (which I listened to w Hifiman Sundaras and smsl dac/amps) were the sound profile that I prefer on fr4, pom, or polycarb plates. I’m not too fond of brass plates because it is too pingy imo.
The bingsus' have a nice clean and deep toned clicky sound. The kittys' have in my opinion a clacky sound meaning a thocky click or deeper toned click but that is just how I can explain it to myself lol. The susuwataris' sound like they have a more deeper toned clack then the kittys' do and if you listen carefully, they sound a bit scratchy but not a problem for me. The sa bliss have a slightly higher toned clack then the susuwataris' but still a deeper tone then the kittys' which I like but the bliss sound slightly scratchy too like the susuwataris' do but again not a problem. So if I were to be picky I would choose the kittys' only because I enjoy the thockier sound of a switch rather then a clickier sound but I still love the click it just has to be a deep toned click which is what I call a clack and a deep clack gives you that thocky sounding switch so I need both together to get my sound. Also, the kittys' are more clean sounding, meaning to me they don't sound scratchy. On the other hand, the bliss and the susuwataris' sound dirty lol, or scratchy, but still not a problem because they all sound really good. Thank you once again Minterly for blessing my ears with another sound test. They never get old.🤜💥🤛
This is a clean layout, I hope more keebs come in a layout like this
oh fack
Wow this is a really interesting layout
Are you typing on a qwerty layout or ?
Such a cool layout. Hope I can get in on this. Thanks for sharing
Nice
Just got Kitty KAT and the 7u spacebar doesn't work anyone else?
This is a known issue with a lot of the Kitty sets due to the way KAT tooling for the 7u bars is. If you purchased from CK, they issued an e-mail for you to request replacements. If you purchased from another vendor, I would contact them to request a replacement so the vendors can all request a replacement from Keyreative in a timely manner.
@@Minterly thank you very much I have contacted deskhero today
the lavs are quite noice
Ayy you got the video to finally upload after all those export failures. Nice~
I have never come across KAT Kitty before. It looks clean!
I bought KAT Kitty yesterday and that keyboard today. I had never heard of them either.
@@It_needs_to_be_said where is kat kitty from I need the keycaps
@@toocxnfident7846 cannon keys. Search it, the listing will show up. It sold out fast, but you can do email notifications. I just posted mr build on Reddit yesterday and about 20 ppl asked my the same question
That KAT Kitty THOCC. JEEZ.
The THOCC on the SA Bliss.. OH MAMA
I really like KAT kitty, are they still for sale?
How come on MT3, you press capslock so many times?
The board wasn't plugged in and I didn't notice my hands weren't on homing key.
sounds super wet. too much lube? don't like the sound of those lavenders. great video! love the new format that compares all different keycaps. great stuff! sub!
Interesting... I can’t hear the wet sound you’re taking about, just sounds very quiet to me. I did apply a thin layer of 205g0!
I was gonna say it sounds dry
nice nails
the sound oh my gosh
Have you compared the difference between the half plate vs the full plate? I just hopped into the GB and not really sure what the difference is
Typically the area lacking a plate is very soft and does not have loud typing sounds. It's also flexier since you're typing directly on the PCB and there's no plate to support the bottom out bounce back.
@@Minterly Ah okay, makes sense! Thanks for the super fast feedback btw! Figured I'm just gonna grab an extra PCB + half plate just in case it looks like ^^
I will always regret not getting bingsu :(
r2 is coming soon!!!
Why is the left hand shifted 1u left on susuwatari?
The board actually doesn't take input since the JST connector lifted during the build... so I'm a dumdum and didn't check carefully while I was fake typing.
XD
Been debating wk or wkl for this. Hmmmmm which one is ur pref?
I don't really like WKL because I think the blockers look a bit freaky.
Had my hesitations about wkl too lol, just ordered the ewhite wk!
live the the look of the board, someting about it being so thin and long. I didn't realize this board had bluetooth!
it doesn't, sound tests are done without a cable so she can perfectly change out the keycaps without messing up the framing.
Actually the JST connector was lifted, then broken during the build, and since it's coming to GB so soon, I just filmed a sound test without fixing the board yet.
@@jubjubSC ohhh thats makes sense! Never noticed that!
@@Minterly oh dang that suck about the connector. still a great build and video!
6.25u space ❤
No
got excited for a sec because i thought it was a wireless board lol
Which switches u like the best, I’m founding which I get.
Do you like thocc or clack? Linear or tactile?
@@saucyg6371 I will say tactile, I mean I bought the pinoko and okomochi for my first keyboard. I’m choosing for my second one
@@saucyg6371 Is the Moyu and Snow White switches good?
Moyu’s are definitely really good! I haven’t tried them or the snow white switches personally, but a lot of the sound tests (which I listened to w Hifiman Sundaras and smsl dac/amps) were the sound profile that I prefer on fr4, pom, or polycarb plates. I’m not too fond of brass plates because it is too pingy imo.
@@saucyg6371Thanks!
what kind of keycaps is good with north faced led zealios v2 65G ??
Minterly has the most beautiful hands. (No weirdo.)
Is the same as the black one in the GB/IC? It looks lighter
also thanks for the sound test minterly
Yep. It's black in person but easier to look lighter/darker depending on how well lit your room is.
@@Minterly
Actually this unit is really dark gray if I'm not mistaken and the GB black version is visible in Apiary's stream on Twitch
@@jubjubSC Hmm... you may be right. I prefer pastel/white boards so all boards darker than a certain shade of grey all seem the same to me... haha
Is it me, or is this video mixed pretty quiet?
This board is EXTREMELY quiet due to it's low profile. I actually upped the gain by 10dbs when editing.
The bingsus' have a nice clean and deep toned clicky sound. The kittys' have in my opinion a clacky sound meaning a thocky click or deeper toned click but that is just how I can explain it to myself lol. The susuwataris' sound like they have a more deeper toned clack then the kittys' do and if you listen carefully, they sound a bit scratchy but not a problem for me. The sa bliss have a slightly higher toned clack then the susuwataris' but still a deeper tone then the kittys' which I like but the bliss sound slightly scratchy too like the susuwataris' do but again not a problem. So if I were to be picky I would choose the kittys' only because I enjoy the thockier sound of a switch rather then a clickier sound but I still love the click it just has to be a deep toned click which is what I call a clack and a deep clack gives you that thocky sounding switch so I need both together to get my sound. Also, the kittys' are more clean sounding, meaning to me they don't sound scratchy. On the other hand, the bliss and the susuwataris' sound dirty lol, or scratchy, but still not a problem because they all sound really good. Thank you once again Minterly for blessing my ears with another sound test. They never get old.🤜💥🤛