Hydro Jetting Heads: Uses and Methods

Поделиться
HTML-код
  • Опубликовано: 5 июл 2022
  • Learn about different types of clogs in your plumbing, including grease and flushable wipes. Find out the best hydro jetting heads for removing specific clogs. Look at the pros and cons of snaking vs hydro jetting. This video is for plumbing apprentices, DIYers, and professionals alike.
    ▸ Subscribe: / williamsplumbingheating
    ▸ Facebook: / williamscompanies
    ▸ Instagram: / willplumb
    ▸ LinkedIn: / 18171335
    Williams is the Northwest’s largest plumbing and civil contractor. We offer a comprehensive line of quality plumbing, civil construction, HVAC, engineering, green energy, and service solutions to meet the needs of just about any building project.
    Williams Plumbing & Heating
    2131 Industrial Dr.
    Bozeman, MT 59715
    (406) 587-0969
    www.willplumb.com/
  • ХоббиХобби

Комментарии • 47

  • @hill4472
    @hill4472 7 месяцев назад +1

    The reason why we learn these valuable tips, no pun intended, is to avoid calling a professional and stimulating the economy unnecessarily. Excellent video nonetheless, the information here is gold.

  • @stevemarkovic9326
    @stevemarkovic9326 Год назад +3

    Fantastic video! Dave explained things very well!

    • @davidmize8489
      @davidmize8489 11 месяцев назад +1

      Thanks, we hope it was helpful.

  • @DrainReaper
    @DrainReaper Год назад +3

    Sewer jetting always get the job done👍snake only makes the pipe drain again but the problem is usually not fix and they always end up getting to call a sewer jetter guy sewer jetter as so many tools and options to chose from to do the job

  • @duderlefebvre3869
    @duderlefebvre3869 8 месяцев назад

    Which nozzle or nozzles would you recommend to clean the black tank and grey tank of an rv??

  • @rbcreations2
    @rbcreations2 6 месяцев назад

    Great video! Can you do this for tree roots thru a toilet hole (without the toilet attached)?

  • @jessemadden1866
    @jessemadden1866 Год назад +1

    You can tell he’s certified by the way he bare hands those nozzles and that hose.

    • @davidmize8489
      @davidmize8489 11 месяцев назад +1

      You are correct. On site we would not go bare handed. This video was done at our training facility with manufactured clogs. Still for training purposes I should have maintained the same standard. Good catch, thanks for the comment.

  • @aaronjamesdavis5
    @aaronjamesdavis5 8 месяцев назад +1

    Would you run a jetter inside? I saw a decent amount of water coming out of the line with cleaning the grease clog. It seems like you’d make a mess underneath the kitchen sink.

  • @christopherjacob6209
    @christopherjacob6209 3 месяца назад

    what head is used scrub rv black and grey tanks? Ive seen companies that run a head in the tacks and they're able to clean them out really well

  • @Shadypoolguy
    @Shadypoolguy Год назад

    Question,
    What head would you use for dirt, pebbles and pool DE clog in deck drains? Looking to add this service to my pool company, we find a lot of clogged drains!

    • @davidmize8489
      @davidmize8489 11 месяцев назад +4

      It depends on if you are upstream or down stream of the problem. If you need to push it down stream something like the Warthog head works. If you need to pull them back then a cleaning head with only backward facing jets would usually work the best.

  • @bosatsu76
    @bosatsu76 4 месяца назад

    Seems like after you clear a clog, you wind up spreading it BACK up the pipe... Do you then run a different tip to push the residue forward and down to the street main?

  • @MrJdon28
    @MrJdon28 5 месяцев назад

    Can you clean drains in restaurant/houses without a plumbing license?

  • @stever.9925
    @stever.9925 8 месяцев назад

    Awww, yes, could you gentlemen please provide a closeup view and model number for Mrs. Nasty? Lol

  • @dimebag667
    @dimebag667 2 месяца назад

    It looks like a lot of water and gunk is coming back at you when you pull the jet back. Is there go to method to prevent spraying all that nastiness on yourself?

  • @Sagemeister007
    @Sagemeister007 27 дней назад +1

    Great video! Also you can always trust a man with a handlebar mustache!

  • @sabo6729
    @sabo6729 Год назад

    Those can be used on a 3/8 hose!??

  • @bosatsu76
    @bosatsu76 4 месяца назад

    What pressure are you using... How many GPM is recommended... My issue is roots in the line. What head would I use.
    After mechanical work ($700) my plumber wants $1000 more to Hydrojet it... Seems like very excessive exploitation to me... So here I am, determined to do it myself.

  • @trevargerken9971
    @trevargerken9971 Год назад +1

    It looked like you just screwed that head on hand tight. Curious how you attach a head. Where I work. We break out the flat jaw knipex, and torque it as hard we can. In fear of losing a head.

    • @davidmize8489
      @davidmize8489 11 месяцев назад +1

      Although it is not shown in the video, we do wrench tighten the heads. However we in general try not to over torque them.

  • @azoirwazo3627
    @azoirwazo3627 Год назад

    Question.
    Where can i purchase the jet head..?

    • @davidmize8489
      @davidmize8489 11 месяцев назад +2

      Many places can supply heads. The real issue is sizing them correctly to your equipment. I have found Jetters Northwest to be a very good source.

  • @stephenburdess2914
    @stephenburdess2914 Год назад

    Is it odd that the plumber I used basically just attached the jet head to a garden hose? Didn’t seem to high tech to me. Also his hose got stuck yesterday, who would be responsible for getting it removed?

    • @davidmize8489
      @davidmize8489 11 месяцев назад

      I cannot speak to someone else’s methods. In general we would not use that specific technique, not being on site and seeing the situation I really can’t say if the technique was appropriate or not. Sorry I’m not more help with this one.

  • @tinman3600
    @tinman3600 6 месяцев назад

    So will jetter take care of calcium buildup

    • @davidmize8489
      @davidmize8489 6 месяцев назад

      It can with the proper head. Your supplier can give you options for it.

  • @mrdeafa25
    @mrdeafa25 10 месяцев назад

    How much psi is required to jet drains to this high standard please?

  • @jerrynonofbss2588
    @jerrynonofbss2588 28 дней назад

    Can anybody suggest a brand?

  • @bosatsu76
    @bosatsu76 4 месяца назад

    Mr Nasty can do some damage if you're not careful... What kind of damage... How do we be careful... What are we looking for...

  • @crazyantny9161
    @crazyantny9161 3 месяца назад

    Which adapter do you use for a king kong dump that actual expands the width of the drain😂

  • @williamburns7336
    @williamburns7336 6 месяцев назад

    VALLEY PLUMBING IN INDIO CALIFORNIA 1200.00 AND ALL THEY HAD WAS EXCUSES. 1200.00 RATHER THEY UNCLOGGED THE PIPE OR NOT ! THAT'S A LOT MORE THEN THE TOOLS FOR DIY

  • @jeffreyryan2
    @jeffreyryan2 4 месяца назад

    Ladies, leave that man alone!

  • @Chicago_Clout
    @Chicago_Clout Год назад +2

    Certified drain cleaning expert.....who ya fooling.

    • @davidmize8489
      @davidmize8489 Год назад +3

      Certifications are from The International Institute of sewer and pipe cleaning. Certifications I hold from them include. 1)Safety 2) Operations 3) Jetting. I hope this is helpful.

  • @freddylageschaar6028
    @freddylageschaar6028 4 месяца назад

    Baby hose jetter.

  • @angetodac
    @angetodac 6 месяцев назад

    Yeah,right: call me he pro

  • @califuturist
    @califuturist 4 дня назад

    Why don’t consumers just use wipes made out of starch?

  • @mostlikelywedoitservices6926
    @mostlikelywedoitservices6926 Год назад

    The machine you were running for this training video. What were the GPH and the PSI?

    • @markkolecke6025
      @markkolecke6025 Год назад +2

      I know that warthog is 8 gpm at 4000 I have one.

    • @mostlikelywedoitservices6926
      @mostlikelywedoitservices6926 Год назад

      @@markkolecke6025 Thank you.

    • @davidmize8489
      @davidmize8489 11 месяцев назад

      Mark is correct on that head. The best practice is to always size the heads to your machine’s specifications, a good supplier really helps in that regard.

    • @akbarkazikazi8021
      @akbarkazikazi8021 11 месяцев назад

      Price sar

    • @Mark-gp5qe
      @Mark-gp5qe 9 месяцев назад