Thanks so much man. You just helped me get past the final step to take my first irl flight. Great articulate explanations. Have a great weekend brotha.
Homie is the source for quick and to the point ELRS tips and tricks, I know this isnt ELRS specific, but I am just saying cause it was Drainman that allowed me to not be afraid of ELRS, and becime proficient with it after only a cpuple of his videos.... I owe this man, big time!!!
Wow! Thank you. I had that exact problem with flashing the firmware but not with the sbus protocol! Thanks. I'm using a caddix vista with a new rotorriot fc!
I always learn something from you Thank You, I truly hope that you are part of some High School and or Middle School STEM Program You would make a Great Teacher
Crazy. I remember finding this channel wayyy back when impulse released the alien. Had the pdb with the built in osd. Freakin mind blowing at the time. Kiss esc burning up all the time. Now most stuff just works out the box.
Hey man can you maby help my quad is Doing its normal starup beeping but it beeps one more time . I have no osd in my googels and my Radio is binding but not responding
Whats up.. So i have a client that im fixing a connection issue with his drone. Using a radiomaster zorro with elrs connecting to a darwin ape fold 4inch. It worked fine before. I had to reflash the FC the first time i fixed this drone cause the client doent know what hes doing. Fixed that time. He didnt want to proceed to have me set up his gps stuff. He got the drone back and messed with the gps stuff and somehow hit a setting or turned something off, and now the receiver doesn't talk to the FC now. Ive updated the fc, the zorro tx and the elrs on board and rebound it. It shows that its bound but still no movement tho. You can see in the reciever tab that the colored lines move to their bound positions but no movement from the sticks. Now i have since bound it to my Radiomaster TX12 MK2 with elrs and it works on there. I even took the sd card out of the Zorro and put it in my tx12 just to see if maybe it was the sd card, but to my surprise it still worked.. I am at a loss with what to do here. It seems like something on the radio end of the software was switched off or something making it not want to talk to the FC despite it being bound.. And help or suggestions would be greatly appreciated
Helloo fpv friend..i have the same problem on my i flight 2.4gh elrs rx . I did all steps ,only the last one for vista i didnt. What is my problem?? Please anyone can help me?? 🤯🤯🤯🤯🙏🙏🙏🙏
I am struggling trying to get an elrs happymodel ep1 to show stick movement in betaflight. tx is to rx and rx is to tx. im on the correct uart. Im binded to my transceiver and still nothing in betaflight. I've watched so many of your videos and others tshooting this issue. So ready to "toss this thang"....any other tips? (anyone)
10:45 - you sir are a hero...... Been trouble shooting for hours! Needed to flash ELRS. Thank you
Thanks so much man. You just helped me get past the final step to take my first irl flight. Great articulate explanations. Have a great weekend brotha.
Homie is the source for quick and to the point ELRS tips and tricks, I know this isnt ELRS specific, but I am just saying cause it was Drainman that allowed me to not be afraid of ELRS, and becime proficient with it after only a cpuple of his videos.... I owe this man, big time!!!
Wow! Thank you. I had that exact problem with flashing the firmware but not with the sbus protocol! Thanks. I'm using a caddix vista with a new rotorriot fc!
I always learn something from you Thank You, I truly hope that you are part of some High School and or Middle School STEM Program You would make a Great Teacher
Thanks a lot Man. My receiver is working now. The suggestion to flash with radio protocol did the trick. Thanks a ton
Crazy. I remember finding this channel wayyy back when impulse released the alien. Had the pdb with the built in osd. Freakin mind blowing at the time. Kiss esc burning up all the time. Now most stuff just works out the box.
thank you so much bro!! keep up the good work.
I can't get it from Joshua, I got it from you! tnx buddy!
Thanks!
Great video D man. Hey, I wanted to know if there's any READY-MADE work bench power supply you recommend?
Unless you spend a ton of money they are all about the same, here's the one in my links: amzn.to/37s0SdE
Great video! Thank you
But seriously… betaflight… if you don’t have sbus flashed it shouldn’t show up as an option on the receivers tab.
Hey man can you maby help my quad is Doing its normal starup beeping but it beeps one more time . I have no osd in my googels and my Radio is binding but not responding
Whats up.. So i have a client that im fixing a connection issue with his drone. Using a radiomaster zorro with elrs connecting to a darwin ape fold 4inch. It worked fine before. I had to reflash the FC the first time i fixed this drone cause the client doent know what hes doing. Fixed that time. He didnt want to proceed to have me set up his gps stuff. He got the drone back and messed with the gps stuff and somehow hit a setting or turned something off, and now the receiver doesn't talk to the FC now. Ive updated the fc, the zorro tx and the elrs on board and rebound it. It shows that its bound but still no movement tho. You can see in the reciever tab that the colored lines move to their bound positions but no movement from the sticks. Now i have since bound it to my Radiomaster TX12 MK2 with elrs and it works on there. I even took the sd card out of the Zorro and put it in my tx12 just to see if maybe it was the sd card, but to my surprise it still worked.. I am at a loss with what to do here. It seems like something on the radio end of the software was switched off or something making it not want to talk to the FC despite it being bound.. And help or suggestions would be greatly appreciated
Same issue here
Helloo fpv friend..i have the same problem on my i flight 2.4gh elrs rx .
I did all steps ,only the last one for vista i didnt.
What is my problem??
Please anyone can help me??
🤯🤯🤯🤯🙏🙏🙏🙏
I have the last problem... the RX doesn't show up in betaflight.... but my drone is new... 😅
3 minutes of flying 35 years of reading, watching, I'm thinking about selling all that junk
I am struggling trying to get an elrs happymodel ep1 to show stick movement in betaflight. tx is to rx and rx is to tx. im on the correct uart. Im binded to my transceiver and still nothing in betaflight. I've watched so many of your videos and others tshooting this issue. So ready to "toss this thang"....any other tips? (anyone)
I have the same problem. Still not working
I have the same problem....
@@dawanparker6555 already settle my problem, i reflash my fc with CRFS protocol.
Same problem over here
but what about elrs receiver it didn't worked there is no throttle movement in beta flight. Drain man please help me out with this
Did you get this done? I’m having the same problem
@vickyandbru yeah. I found the mistake on my transmitter and changed few settings and it's working good on the same day
@@invicto8138 u remember what mistake u had? Might be the same thing on my side haha
Cannot detect RX, target Blindly flashing, restart device and tray again...
I had the TX and RX wires in wrong 😅