Thank you very much for this Easter present. It worked on my 2005 GMC Yukon XL Denali. I've tried others' directions without success. Your video instructions were clear and easy to follow. The opener in my 2005 GMC Yukon XL Denali now works. You are appreciated.
@@noahenglert IDK, I could try the approach you suggested, but I think that the remote is too small and inanimate for the "f it" method to work! I don't see that as a viable option and will stick with the other process he demo'd
@@paulschroeder4854 i actually did smore research and unfortunately my garage door doesn't have a "learn" mode😂😂😂😂 i will go through my manuel and see what i can figure out otherwise it's a fuck it hahaa
So... my garage home base doesn’t seem to have any sort of buttons in it. I looked in all sides. I have a Lincoln mkx, with the built in buttons. I tried following the instructions exactly and the lights did exactly what you’d say they would... the started blinking slow then fast. But it still won’t pair. I did it about 10 times with the same results and even tried a different one of the 3 buttons in my car.
Question - All the videos say hold the two outter buttons to clear - Your two outter buttons are not the one with the Home sign....My two outter buttons are one with the home sign ands one without. Any clarification on that?
Hmm. I’m not sure what that may indicate. Perhaps a fault or failure? You could try following the steps to reset all buttons first and see if that helps.
I have a 1997 Jaguar XK8. I did everything as you said and it still did not work. I held it down the 1st and 3rd button. It did what you said. I held the garage door opener up to it like you said. It did the blinking. Push the button and did not work. I repeated 4 or 5 times and still did not work. The Garage door is a Genie. Does that matter?
There’s usually a different process just adding additional remotes, vs resetting and adding new. Depending on your vehicle, it’s usually very similar, just skipping a step or two.
Worked for my 2015 mustang EcoBoost although I had to use the main button on the garage opener itself then I held down the middle button for 5 seconds with the car running then I let go of the middle button for 2 seconds then pressed down a second time for about 5 seconds again when the door started to come down. Then i pressed it again and it opened up.. so glad it's so much easier than fumbling around with that garage control.
How do I do this without a transmitter. I programmed my older GMC Yukon without having the transmitter and it was very easy. I recently purchased a newer Jeep, and it's just working. Any help will be appreciated.
Hi! There may be a way to do it without a remote (I have not done it this way before), but you could inexpensively purchase a remote online, pair it with your opener, then follow these steps. Good luck!
Call homelink. Theyll either walk you through it or, based on your garage door opener, sell you a necessary “signal bridge module. Im buying mine on Amazon this week.
I have a 2014 Buick Enclave that I’m having trouble programming. I’ve pressed LEARN on my Chamberlain Whisper Opener and tried multiple times to get the Buick Universal button to work. I’ve programed successfully two remotes. Help?
Mine is not working and neither is it turning orange right away when I press the two buttons. Is it possible that I have a short somewhere or maybe I need to replace the fuse? It never turns orange at all no matter what buttons I press.
If you have more than 1 button (most vehicles have 3) you can pair the remaining two buttons to any other garage opener. This includes at a second house!
What if the Craftsman Garage Door Remote is lost or no longer working? 2008 Mercury Grand Marquis... I programmed my previous vehicle without the remote, but I am unable to perform same on this one (2003 Homelink vs. 2008 Homelink) Do you have any advice or guidance? Thanks!!
Hi Scott, The first idea that comes to mind would be to buy a new remote. You can order these online easily and pair it with your opener. Then, follow these steps. If I find any other solutions I will be sure to update you. Good luck! Please share if you find a solution :)
Hey, great video but for some reason my truck isn't pairing with the remote I have for my garage door. I have a 1999 Chevy Blazer LS, and I've gone through the learning steps but I can't get the indicator to flash the successful pairing indication. Any ideas? Is my truck just too old for this opener?
The video explains the steps to pair. If you have any specific questions or problems you are running into please comment here and we can try to troubleshoot.
@@MichaelHooten85 incase you still need an answer. on the garage door machine inside your garage, there’s a little red button. you press that then hold the button in your car to pair it! you should have 30 seconds but works best if you have 2 people :)
I can program all three of my cars to open one Genie garage door. Unfortunately when I program one car, it forces the other two cars to lose their connection. So in effect, I can only have one car programed at a time. This is so inconvenient.
What do you do if you don't have a remote, your only way to open the garage is from another car's homelink, and you got rid of that car and now you have another car with homelink but no remote????
Hi HR, you may need to purchase a new remote to pair with your opener first. Then you can use that remote to pair your car. Replacement remotes can usually be purchased online for not a huge cost.
Worked on my 2006 Acura TL ( which is essentially an Accord ) but unfortunately not on my 2001 Honda Odyssey. I lost my owner's manuals that is why I have to look online for setting up the garage opener. It is kind of weird since both came from the same company.
Hi, yes! The easiest would be to purchase new remotes that are compatible with your opener model. You should be amble to find these fairly easily online or at a hardware store. Once you have the new remote(s) you can program it, the use it to program your vehicle!
Hi there! Sorry to hear that you’re having trouble. My recommendation would be to look up how to reset your garage door opener, reset both cars, then try the process again.
I have a Craftsman 139.54920 and a 2008 Dodge Grand Caravan I have tried the instructions in the video and it won't learn. Do you have any additional suggestions. I believe that it is a Security +2
I am having problems pairing my 08 Cadillac Escalade with Entry Gate & Liftmaster Garage Door opener. Had no problem with wife’s 2016 Cadillac SRX. Any suggestions to my older model?
Not working for me. I don't have a garage door opener. But I'm held first and third button for 30 seconds and it reset those buttons. Then I pressed learn on the garage motor. Then I came back to car and held the first button for over a minute and nothing changed
Hi Jerry, first, I suggest you look in your vehicles user manual to review the steps for this procedure. The steps might be the same as I explain here, or slightly different. What do your buttons look like? How many times have you tried? It can sometimes take several tries of pairing, then resetting to get it to work.
I can not get mine to program. I get the rapid flashing light but then it will just slow blink. I have tried the remote and the learn button. No success
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thank you so much - I didn't even read my manual your tutorial was awesome!
Best simplistic video tutorial ever. Thank you
I’m so glad you found this helpful!
Worked like a charm. Literally took less than 30 seconds. Thanks
This work perfect on my 2004 Jeep Grand Cherokee with a Linear garage door opener.... thank you for the video
Thanks for the one minute tutorial bro
Thank you so much for this video. It worked on the first try after following these steps.
Thanks for keeping it concise . Worked perfect for me.
Cheers.
Thank you very much for this Easter present. It worked on my 2005 GMC Yukon XL Denali. I've tried others' directions without success. Your video instructions were clear and easy to follow. The opener in my 2005 GMC Yukon XL Denali now works. You are appreciated.
Really glad to hear this was helpful for you! I appreciate your feedback :)
didn't work for me and i did exactly what he did 10 times so idk what's wrong with it but idec anymore haha fuck it
@@noahenglert IDK, I could try the approach you suggested, but I think that the remote is too small and inanimate for the "f it" method to work! I don't see that as a viable option and will stick with the other process he demo'd
@@paulschroeder4854 i actually did smore research and unfortunately my garage door doesn't have a "learn" mode😂😂😂😂
i will go through my manuel and see what i can figure out
otherwise it's a fuck it hahaa
Ty my 1975 Lincoln towncar worked like a charm 😊😊
Woohoo!!
Straight to the point! Great job Mate! And Thanks!
That was awesome!!! It took less than 30 seconds and I’ve been dreading the process 🎉
Thanks Worked perfect 1st time. Great directions
You're welcome!
Can you program a garage door opener without a garage door button and just the learn button and the car button
I tried with no success..!
There are various frecuencies so only if you are lucky and your car is in the same frecuencie as the one by the garage door opener
Thank you very much. Followed your directions and worked 1st time.
So... my garage home base doesn’t seem to have any sort of buttons in it. I looked in all sides. I have a Lincoln mkx, with the built in buttons. I tried following the instructions exactly and the lights did exactly what you’d say they would... the started blinking slow then fast. But it still won’t pair. I did it about 10 times with the same results and even tried a different one of the 3 buttons in my car.
Thanks, worked like a charm on my H2 Hummer. Set up garage doors in two separate locations, awesome!
Nice work! Awesome you were able to set it up for two separate locations.
Thank you! These steps worked for my Toyota Highlander. 💃🏼💃🏼💃🏼
Same
Thanks, King. Worked on my 2014 Toyota Camry
This worked really good for my 2016 lexus nx thanks
This tutorial actually helped. Thank you!
I'm so glad it helped!
Thanks! Worked like a charm! I didn’t even need my owners manual, just this tutorial
Great to hear! Thanks for your feedback.
For me still not working :( Lincoln Navigator 2010 and Hörmann ProLift. I tried both ways but didnt flash fast. Thanks for helping
Question - All the videos say hold the two outter buttons to clear - Your two outter buttons are not the one with the Home sign....My two outter buttons are one with the home sign ands one without. Any clarification on that?
Worked like a charm
Hooray!
I couldn’t get it to work. My truck is a 2006 so I’m not sure if that has something to do with.
What if you don’t already have a remote can you still do it without it
the light under the home symbol thing in the car lights up red for me
Hmm. I’m not sure what that may indicate. Perhaps a fault or failure? You could try following the steps to reset all buttons first and see if that helps.
Nice video straight to the point. Thx
I'm glad you found this useful. Thanks for the feedback!
Information works perfectly!!!
That’s great Kristy!
I have a 1997 Jaguar XK8. I did everything as you said and it still did not work. I held it down the 1st and 3rd button. It did what you said. I held the garage door opener up to it like you said. It did the blinking. Push the button and did not work. I repeated 4 or 5 times and still did not work. The Garage door is a Genie. Does that matter?
It did work well
But when I try to program another remote for a different door it seems to erase the first one I did
There’s usually a different process just adding additional remotes, vs resetting and adding new. Depending on your vehicle, it’s usually very similar, just skipping a step or two.
Great video. This worked for me.
Glad it helped!
This worked great for my 2022 Bentley Continental and my 2025 Maserati GT and my 2021 Land Rover Range Rover...
So glad you were able to join us in the past to share your success! Very glad to see my videos continue helping into the future 😁
Does it matter which button you press on the remote?
Worked for my 2015 mustang EcoBoost although I had to use the main button on the garage opener itself then I held down the middle button for 5 seconds with the car running then I let go of the middle button for 2 seconds then pressed down a second time for about 5 seconds again when the door started to come down. Then i pressed it again and it opened up.. so glad it's so much easier than fumbling around with that garage control.
I don't get fast blinking when i try to pair the remote with the car (2016 Tahoe)
I have an 1999 Yukon Denali and I do not have the remote to my garage door opener. Can I still do the learn button?
Awesome dude it works! Your video is the only one that worked for me 😂😂
Very glad to hear it worked for you!
Followed to a T and I cannot connect my 08 trailblazer any ideas?
This video rocked my boat!!! Thank you
Hope you were wearing life jackets! Thats just scary
Worked on my 2004 Cadillac Escalade and 2015 Chevy Malibu
How do I do this without a transmitter. I programmed my older GMC Yukon without having the transmitter and it was very easy.
I recently purchased a newer Jeep, and it's just working. Any help will be appreciated.
Hi! There may be a way to do it without a remote (I have not done it this way before), but you could inexpensively purchase a remote online, pair it with your opener, then follow these steps. Good luck!
I cant get my homelink to learn the garage door remote frequency... it never blinks fast
Neither does mine
Call homelink. Theyll either walk you through it or, based on your garage door opener, sell you a necessary “signal bridge module. Im buying mine on Amazon this week.
Thanks it worked on my doudge journey
I have a 2014 Buick Enclave that I’m having trouble programming. I’ve pressed LEARN on my Chamberlain Whisper Opener and tried multiple times to get the Buick Universal button to work. I’ve programed successfully two remotes. Help?
cannot get my garage paired with my new car have tried now 15 times will do it again hopefully will get it
Awesome done in 10 seconds thanks
That has to be a record!
Sweet! Worked on my Chrysler Pacifica
This did not work with our 2017 Yukon Denali. We do not have a remote for the garage opener.
What if you don’t know where your garage door opener is can I do it with out the original opener
This worked perfectly for my Lexus IS 250! Thank you!
Didn't work on my 2017 jeep cherokee. For either the current opener sync or the learn button sync.
Worked!!! Thank you 😊
Quick question do I need to keep my other garage door opener in the car for it too continue to work
Nope!
Mine is not working and neither is it turning orange right away when I press the two buttons. Is it possible that I have a short somewhere or maybe I need to replace the fuse? It never turns orange at all no matter what buttons I press.
If the lights never turn on, I would suspect a fuse issue.
Thanks this worked on my lambo Uris
My key pad stopped working. How do I program the car garage door opener and keeping the key pad enabled?
Can I do this with more then one house? If I can how can I do it?
If you have more than 1 button (most vehicles have 3) you can pair the remaining two buttons to any other garage opener. This includes at a second house!
What if the Craftsman Garage Door Remote is lost or no longer working? 2008 Mercury Grand Marquis... I programmed my previous vehicle without the remote, but I am unable to perform same on this one (2003 Homelink vs. 2008 Homelink) Do you have any advice or guidance? Thanks!!
Hi Scott,
The first idea that comes to mind would be to buy a new remote. You can order these online easily and pair it with your opener. Then, follow these steps. If I find any other solutions I will be sure to update you. Good luck! Please share if you find a solution :)
2010 gmc 2500hd. Refuses to do any of this. I cant sinc remote, nor truck to opener.
Hey, great video but for some reason my truck isn't pairing with the remote I have for my garage door. I have a 1999 Chevy Blazer LS, and I've gone through the learning steps but I can't get the indicator to flash the successful pairing indication. Any ideas? Is my truck just too old for this opener?
It didn't work for my 2018 Caddy XTS either 🫤
Doesn’t work with my 2024 Jeep and geenie powerlifting 900 😭😭 not sure what to do
Thanks buddy you helped me figure this out I really appreciate y'all
No problem 👍
I dont have a remote for my garage an trying 2 pair with opener
Same here. No success!
Any success??
@@Tigeabee nah...! 😒
Hello, I tried pairing my garage door opener both ways and it's still not working. Please help. thanks.
Please help I have a 2013 Yukon SLT. And a Chamberlain MYq.
The video explains the steps to pair. If you have any specific questions or problems you are running into please comment here and we can try to troubleshoot.
@@nonscioap Hello and thank you for your time. I follow the video instructions numerous times.
How do I pair it without a remote?
Asking the most important questions.
Exactly 😳🙄
Yes I’d like to know
@@MichaelHooten85 incase you still need an answer. on the garage door machine inside your garage, there’s a little red button. you press that then hold the button in your car to pair it! you should have 30 seconds but works best if you have 2 people :)
Thank you so much, it worked on my 2006 Nissan Titan
I can program all three of my cars to open one Genie garage door. Unfortunately when I program one car, it forces the other two cars to lose their connection. So in effect, I can only have one car programed at a time. This is so inconvenient.
What do you do if you don't have a remote, your only way to open the garage is from another car's homelink, and you got rid of that car and now you have another car with homelink but no remote????
Hi HR, you may need to purchase a new remote to pair with your opener first. Then you can use that remote to pair your car. Replacement remotes can usually be purchased online for not a huge cost.
Hi I’m trying to do as you give out intrusion but it’s not working for me
Thank you.
You're welcome!
This worked thank you
You're welcome!
Great tutorial. It worked with my Subaru ascent.
Very glad to hear it worked for you!
Thanks!! It worked for me!
Worked on my 2006 Acura TL ( which is essentially an Accord ) but unfortunately not on my 2001 Honda Odyssey. I lost my owner's manuals that is why I have to look online for setting up the garage opener. It is kind of weird since both came from the same company.
No comments yet. People must not have any problems!
Thanks! Worked for me ☺️
worked on 2016 GMC Yukon
My remotes are either non functional or lost. Is there any way to still program my opener to my car?
Hi, yes! The easiest would be to purchase new remotes that are compatible with your opener model. You should be amble to find these fairly easily online or at a hardware store. Once you have the new remote(s) you can program it, the use it to program your vehicle!
I am unable to get my opener in the Jeep to flash rapidly
The buttons on both our cars suddenly just stopped working and now I’m not able to pair to either cars please help 🙏
Hi there! Sorry to hear that you’re having trouble. My recommendation would be to look up how to reset your garage door opener, reset both cars, then try the process again.
@@nonscioap it was the circuit board that went bad was the problem, all good now thank you
Thanks 05 chevy tahoe works 1st try 😎
No problem 👍
I have a Craftsman 139.54920 and a 2008 Dodge Grand Caravan I have tried the instructions in the video and it won't learn. Do you have any additional suggestions. I believe that it is a Security +2
It just flashes green quickly now no matter which button I press. I first reset pressing the 1st and 3rd buttons. 2019 Crosstrek
And than quickly when pairing is complete?
What does that mean?
What that means is when the car and garage door opener have established a connection, the amber/orange light will blink quickly.
I am having problems pairing my 08 Cadillac Escalade with Entry Gate & Liftmaster Garage Door opener. Had no problem with wife’s 2016 Cadillac SRX. Any suggestions to my older model?
Thank you. I was able to program two cars in 10 minutes!
Mine will not program!!! Tried several ways. I have a 2013 GMC Seirra Garodoor openers are fairly new. Chamberlain brand. Please help
Thanks dude
You’re welcome!
Not working for me. I don't have a garage door opener. But I'm held first and third button for 30 seconds and it reset those buttons. Then I pressed learn on the garage motor. Then I came back to car and held the first button for over a minute and nothing changed
Worked on my 2017 santa fe thank you
I have a 2011 cadillac escalade esv. i dont have the house on my vehicle. I'm so lost and in need of help
Hi Jerry, first, I suggest you look in your vehicles user manual to review the steps for this procedure. The steps might be the same as I explain here, or slightly different. What do your buttons look like? How many times have you tried? It can sometimes take several tries of pairing, then resetting to get it to work.
Do I have to do this away from the garage door? Coz everytime I pair it the garage door opens lol
You can do this near the garage door. When you press the button in your existing opened it my trigger the door to open/close.
It worked on my 2015 bmw 2 series
What if you dont have a garage remote
My old Genie opener does not have any buttons , what else can I do???
I can not get mine to program. I get the rapid flashing light but then it will just slow blink. I have tried the remote and the learn button. No success
Hi Samantha, sometimes it take 3-4 attempts (or more) to get it to pair successfully. It depends on the garage opener and vehicle combination.
Did this as described in my owners manual and it still doesn't work. Its a new garage door opener and it was working with the older opener
Sometimes it may take a few tries.
One question is this work with any opener ? ??.