👶 Making your FIRST project in Lightburn - FULL TUTORIAL!
HTML-код
- Опубликовано: 2 авг 2024
- ➡️ Click on ...more↙️for the FREE DOWNLOAD and other Links!
➡️ Here is your FREE ZIP PACKAGE with everything you need!
🔗 lahobbyguy.com/2-L-Heart
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30 are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
❓ Need a crash course in Lightburn? This is the playlist for you!
🔗 lahobbyguy.com/playlist
✅ Grab a drink, sit back, and get ready to learn how to use Lightburn!
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
Need to mail me something?
The Louisiana Hobby Guy LLC
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic #lightburn #tutorial 
Хобби
Just got my Mk2 and this is my first time using Lightburn. I am so grateful for your videos! This was a great first project. ❤️❤️❤️
Glad it was helpful!
I can't figure it out. very discouraging.
I've been following your videos and using LightBurn for 15 months and still have learned (and re-learned after forgetting!) some things from this video! Thank you Rich!
Great to hear Andy! Sometimes I have to rewatch them too when I forget how to do something! 🤪
Great video...as always. Thanks
Awesome! 👍 Thanks for watching!
tyvm - always happy to see these newbie friendly guides !
Glad you liked it!
This is SO awesome. Thank you!
Glad you liked it!
Thank you so much Rich! This is so helpful!! Really appreciate you making this video!
Glad it was helpful!
This is an amazing way to do it. I will be suggesting this to first time users. Thanks Rich!
Excellent, thanks! I know a lot of folks have been asking for it.
Thank you Rich! Awesome video, I watched it all the way to finish.
Thanks for watching Ron! 👍
Awesome video!! Thank you!!! All of your videos I always learn something new in each one. Thanks for all you do
You are so welcome Christy! 👍
Hey Rich! Currently watching this in the garage while I cut a pincecone light! Thanks for making all the great tutorials! Definitely helpful and appreciated.
Awesome! Thank you!
Thank you for the video!
My pleasure!
Great video for a newbie Rich! Probably the best I've seen. Thanks for clearing some things up. Thanks for the file as well.
I appreciate that, *thanks!*
Great video great information !
Glad you enjoyed it!
I have been watching various videos on lightburn and i found yours most informative. Thank you,you will be my resource.
Great to hear Doreen, thanks!
Rich this video is great. I have been using my laser for several months and have learned many new things about the settings and lightburn. Keep up with these great informative videos.
Glad it was helpful Jay!
I just did my first cut following your tutorial. It came out great! I could do it (thanks to you!!!)
Wonderful! You're welcome!
Hi Rich thank you heaps mate it was very helpful. I’m just starting and this will help me big time.
Glad it helped Owen!
awesome video very helpful
Glad you think so!
Nice! I didn't know once you started a multiple layer job you could move the current running job and get ready for the next layer. Very clear and precise.
Awesome! 👍 Thanks for watching!
Thank you so much good vid.......be well and be safe😀💯
Thanks, you too!
One thing you can do instead of deleting then redoing is just “hide” the layer you aren’t cutting! Thank you for this tutorial!! I’ve had my xtool D1 pro for a year now and while I’ve been able to use it, it’s been hard to use it consistently. Funny how these concise instructions have helped me understand what I need to do!! 💕
No, in current position, all items need to be deleted other than the one you're cutting otherwise the job origin will be wrong.
Thank you sooooo much! Bought my first laser (Ikear K1 Ultra) and was super intimidated. Your videos are of the best quality and packed with valuable info, but not overwhelming. I appreciate your step by step guides so much!! Totally gonna check out Lightburn College 😊
Awesome! 👍 Thanks for watching!
Hi Rich. Thanks for all the great tutorials, you make something that could be really complicated easy to understand. For valentines I made my wife a clock following your heart clock guide, she loves it. (loads of brownie points for me) It is only my second project an even though it's not perfect I'm well chuffed with it. Once again Thanks.
You're very welcome Harry! Glad you earned some points! 👍
Great video
Glad you enjoyed it!
You the MAN
Newbie here after watching your video 1051 times
I finally got it
thanks for all that you do
Awesome! 👍 Thanks for watching!
Just got a Mecpow and am working on understanding Lightburn but it is going to take some time. There are two problems with your videos. It is sometimes impossible to follow the mouse to the desired selection on the side board and you don't always explain the key combinations to get the effect. The other problem revolves around watching your video and trying to do the same thing in LightBurn. You need another computer screen to watch the video and another to operate the LightBurn. I have tried to use a tablet but they are too small.
Having said this, your videos are FANTASTIC and I have learned so much from them. I will continue to follow you and may check in on your 4 person podcasts. I follow Steve and Richard also and you are all very generous in sharing your knowledge with us.
Thanks... I think 🤪
great video rich.
Glad you enjoyed it!
I just completed this project on my new Roly 20. So cool, thank you for helping so many of us !Greg
Glad to help Greg! 👍
I tried making another one with a picture and text inside the heart but it was backwards. Can you please help? Greg
You can post your question here Greg: facebook.com/groups/rolyofficial
Rich, thanks for the link. I've never needed Facebook It looks like I might have to join. Lol Greg
Hi, just wanted to say that you are very thorough with your instructions for us "newbies" to the laser world and enjoy learning from your tutorials 👍. . . how did you set that Busy time countdown under the Laser tab? Thank you for sharing your time and tips with us!
The countdown is a standard feature in V 1.5 and above.
Hi Rich, great performance, super good explanations, i like it. thanx a lot. greetings from goode old germany. Uwe Zimmermann
Many thanks! 👍
You've helped a lot, but I will have to re-watch. I hope you answer all my questions!
It's always good to watch a few times and follow along. I had a flood in the shop, so responding will be slow for the next week or so.
@@TheLouisianaHobbyGuy sorry to hear that
i love how he made this vid on valentines day cause to me that says that he loves his viewers and that means me lol i hope im able to put a logo / engrave on these anodized aluminum pens about 12 mm diameter ive never used a laser let alone a rotary but i feel more cofident watching your videos i have mono port 40w i believe
You can do it!
Thanks!! Do you have any recommendations for setttng on anodized aluminum? N for my particular machine ? Monport 40w co2
@@TheLouisianaHobbyGuy wow thanks for replying fast! lol n do yo have any suggested settings for anodized aluminum? for a Monport 40w co2 in particular
Ni, I sure don't.
With your help, my son and I did the heart and arrow, I need to have graphics for making coasters.
There are tons of free art libraries on my free forums. lahobbyguy.com/bb
NO LINK FOR THE GLAZE ???? Loved the resulting heart. I sized it down and it was still great.
I could not find that Rust-Oleum in any nearby hardware store, and then found that there was no "link below" either.
The link is in the read me document in the ZIP file. This is a specialty item from Rust-Oleum and is not sold in stores: amzn.to/3SJtsL3
Do you happen to have a video of how to make picture frames?
Yes Mario, on my livestream channel: ruclips.net/video/FmbLi7eUEpQ/видео.html
Lori again, could you tell me how to make sure my laser is in the right home position. How do you move and resize your image?
I'm not familiar with this exact laser, but the origin should be bottom left.
Rich, when using current position, do you have to move the laser by hand or can you use the map icon and move the laser to where you want it? thanks
You can use the Map icon Steve.
Hi Rich, new to Lightburn and Lasers. I have a Sculpfun S9 and trying to get my head around it and lightburn. A couple of quick questions. I’m more used to CNC using easel software. In CNC I’m used to setting up my workpiece dimensions before then adding carves or cuts. I don’t see a facility to do this in lightburn. Do i therefore just create a shape the dimensions of my workpiece and then use layers for the design element? Secondly, on one of your videos you mention that you use lightburn for CNC. How do you do this when there are no settings for bits etc - do you use a post processor and if so which one. Does lightburn do away with expensive CNC software eg Vectric and Carveco etc? Thanks for your videos they are a great resource to us newbies!
You can create the shape of your workpiece and put it on a tool layer. Then it won’t cut that shape out.
As @Forbes said, you can setup your workspace with tool paths that don't output to the laser. And what I referenced in my video when I said I used it for my CNC was doing a one-function 2D file. CNC machines with Grbl controllers can perform one-function tasks if you edit the Gcode.
Hey, how come the guide lines are also considered as engraving objects when I group everything, resulting in the laser hitting the frame? Thanks in advance, regards, Careltje
The guidelines are tool paths, turn off framing for the guideline tool path.
I cant download the zip file...:( Im really enjoying your videos, very helpful. Really want to do this project as my first.
Right click on it and select, Save As.
@@TheLouisianaHobbyGuy got it thanks!!
What's the advantage to pre painting the panels, seems to be unnecessary, just more to burn through, more toxic chemicals produced. I see a lot of people doing it and recommending it, I don't understand why it's being done?
Usually because there is some engraving involved. With the right machine and exhaust, there is nothing to worry about.
Hi! I'm brand new to this and the print on the manual, that I had to print I'd very small. I don't know to find the size of my laser. It's a QQ CASE from Amazon. Can you help?
It should be 410 x 410mm
So in this picture...how do you know if it's going to just trace around the image or fill it in?
Look at the trace lines in pink, and you can click, fade image to see better.
Rich, Since installing 1.5.0 I get dotted lines that cross on the tip of my arrow and both dotted lines move with my mouse arrow.. How do I turn them on and off?
Go to the Gear icon and turn off Show full screen line cursor Carl.
When cutting out this project I have several missing cuts in the pattern. The laser beam jumped 3/16" and started laser cutting again on several of the lines. Can I send you a picture?.
I am using the Spider X1S laser
Never mind I found the problem. I had the tabs section clicked on by mistake. Alot to learn
Glad you found it! Coincidentally, I am doing a video on tabs right now for tomorrow's video!
My download package keeps saying pending.
I don't know why. It's been downloaded 12K times.