Thanks for touching base on your 3 year! You hit the nail on the head with your recommendations. You guys helped me get mine done about two weeks ago and it went together no problem whatsoever. Thanks Chad and Steven!
Interesting to see... Out west we cut off the the coil buckets and weld on brackets so we can install any coil overs. Spring weights make a big difference and valving. Out here custom one are 150.00 for a set. We're either rock crawling or high speed pre runner builds out here. I build out the titans and starting to fabricate on the frontier and Xterra, nice to see the trails you have out there.
Chad is the man, and your tshirts are one of the more comfortable that ive worn but for some reason the midsection got tight lol. I have the 2"kit you guys sell and i dig it. Ive started doing more wheeling with my frontier since i got a commuter car for work and realistically a 4" kit would be perfect if you guys could come up with it. I dig the idea of the titan swap the big killer to me is the wheel track. Wide front narrow rear.
I've got a semi stock 2012 pro 4x and I love it offroad only issue I've had was the transmissions. I've had 3 in mine, warranty covered the 3rd one due to faulty install from mechanic on the 2nd, when they installed the 2nd tranny there was a pressure plate or something misaligned so when I put it into drive it took up to 10 seconds for the transmission to build enough pressure to actually engage drive which would lead to a huge spike in pressure like a cavitation on a boat causing the truck to almost do a wheelie from the force, needless to say the shop replaced the 2nd transmission and got another new transmission. 2 years later no problems at all this truck is one of my favorite vehicles I've owned its fast light and nimble on these AZ roads with tons of switchbacks and gravel roads, never been stuck once other than burning out the transmission that 1 time, but i was pulling my 19 foot trailer into an area id never been and shouldnt have taken a traiker too!! but since that incident I installed a trans cooler and haven't had a single problem. Brakes are something to upgrade because their brakes are terrible. Great trucks if you can get one that hasn't been beat up. Mines beat up but it's because I use it like it should be used, I won't sell it!!
So would you be kind enough to list what set-up you would recommend for a titan swap parts purchase, install and play list. Thanks for the info. Awesome vid.
We have a parts list made up on our website. Here's a link to our stage 2 kit - www.alldogsoffroad.com/alldogs-offroad-stage-2-tswap-kit-for-2nd-gen-nissan-frontier
I'd suggest extended rear brake lines because having a little slack in the line will allow a log to pass your line by rather than hit it and have no slack or movement to pivot/deform. Because I've done just that. Log popped my brake line right off.
I am coming up on on being titan swapped for 6 months if had to do it again with the Bilstein 5100s I would skip the moog coil springs for the front and go with the Old Man Emu ones instead because the moog ones saged after only having them on for about 4 months with no extra weight on the Front end
That titan swap is genius. Any six inch lift lowers the cross-members, so you lose center clearance and it's never going to articulate like that. If you're actually off-roading, I can't see how a 6 inch box lift kit could work better. Might be fine for a pavement princess but not for the trail.
Thank you very much for the information. The information is invaluable. I do have a few questions I hope you'll be able to help me with. So i'm from Trinidad and Tobago and the Nissan Frontier is a common truck here. I myself have the 4x4 version. I've never heard about anyone here doing a Titan swap here. Is the swap recommended for someone who doesn't mainly off-road? What upgrades would you recommend that would improve on road for the vehicle as it's primary function but functional on the off road? The information you gave I extremely appreciate. Thanks
Always wondered how titan swapped vehicles would hold up. Have had my frontier titan swapped for a year now and it still rides good. One problem I am running into now is that the front left coil is rubbing up against the spring. I probably bent the lower control arm(oem titan) offroading the Devils Stair Case in Sedona AZ last month. Other than that everything else is solid.
@@sc77 if your frontier is titan swapped then you will have no problem doing broken arrow. Still may be able to do it in a stock pro4x but you'll need to take the lines much slower. Only reason I believe I damaged the lower left control arm is because I was wheeling out there at night and hit a line the wrong way. Hope this helps you.
Awesome video with lots of details. Thanks! Can you talk a bit about sway bar removal. I'm assuming that's both front and back. How does it affect daily driving and towing?
Glad you enjoyed the video! You can run a Titan Sway bar if you want, but since the purpose of a Titan Swap is wheel travel, most people leave it off for better articulation. You'll see more body roll but with proper coilovers it's not too bad
@@AlldogsOffroadCoop I hate to say it but I spent more time on the road than off =/. Would love a way a sway bar disconnect, even if it's not electronic like jeeps!
@@dmitrym2922 Disconnect it and drive around, you won't go back. It really doesn't do much, just makes things more uncomfortable. I've been running no sway bars for 2+ years, daily driving.
the truck still had the R180. i dont think he ever broke any axles or had axle issues. usually going to a larger tire than a 33 or running an incorrect t swap length coilover will cause issues.
I’ll be calling soon getting an xterra once I find one local and can’t wait to go trail riding not in a full size. Side not. Looking at the leaf packs are they spring over or under for the xterras?
Thanks for the great follow up! I know you mention the wider front offset but if you ran say a 2 inch wheels spacer in the rear would that not be close to the same as the titan arms?
Hmmm. I really enjoyed this overview. I’m about to start sourcing my own titan swap parts myself to get the ball rolling.i have a 2nd gen ‘11 Xterra and I know Frontier and X’s share almost the exact same chassis and the biggest difference between them is the leaf packs, but I was curious about your part in the rear extended brake lines. Since we have similar chassis, do you think I’d need extended rear brake lines when I want the lift to stay within 3”-3.5” of lift in the front or rear? My X is entirely road use right now as it’s my daily until I get me a lil 4 banger to daily but I just wanted to get your opinion on maybe leaving rear extended brake lines stock for an Xterra vs just getting 18’s or 20. Great video again man! Really love the companies connection and interaction in the community! Super helpful!
heres an interesting question... with just the titan swap, how much has your fuel economy decreased? im wondering if the potentially heavier components and somewhat change in aerodynamics (because of the lift), has the fuel economy decreased a ton.
it really depends on your tire choice. tires effect your mileage more than a lift will. Chad's 3rd gen only lost a couple MPG's with his titan swap, whereas Kyle's 2nd gen has lost 3-4 because of tire choice
@@AlldogsOffroadCoop this makes sense, actually. my wife's 2006 xterra offroad is stock but we have bf ko2s and our fuel economy went down to about 15mpg combined city/highway. not much worse than the reported mpg online. Thanks for the info.
How do you keep your rocker panels and paint looking so nice? I feel like the wider track width could be a nightmare for keeping it clean and free of rock chips
What would be the next best suspension/lift setup if I don’t wanna lose out on so much on road driving dynamics? I love hitting trails and whatnot but my Xterra is also my thousand miles road trip vehicle...
Totally depends on budget and goals. You can't go wrong with our Bilstein 5100 complete kit but if you wanted to go crazy you could run a Radflo extended travel kit
Are there shops that can do this? Between work and home maintenance a mod like that would take me 2 weeks, and since its my DD I can't have it down for that long
Are you referring to the ABS/Wheel Speed Sensors in the rear? Haven't had any issues with them but if you wanted to you could splice the line and make it longer
Bruh how much mpg? My stock pro 4x is getting around 14 city and 19-22 highway, running some pretty agressive all terrain, 265. I'm looking to titan swap as well but I do alot of normal driving too. Plan was to probably just buy a beater accord and really focus on frontier
Thanks for touching base on your 3 year! You hit the nail on the head with your recommendations. You guys helped me get mine done about two weeks ago and it went together no problem whatsoever. Thanks Chad and Steven!
Thanks for the kind words! Glad you enjoyed the video :)
Thanks for sharing your experience. Titan swap is an aspiration, someday.
This is awesome, now I want a Frontier with this and a rear IRS swap for a comfy desert jumper
Interesting to see... Out west we cut off the the coil buckets and weld on brackets so we can install any coil overs.
Spring weights make a big difference and valving. Out here custom one are 150.00 for a set. We're either rock crawling or high speed pre runner builds out here.
I build out the titans and starting to fabricate on the frontier and Xterra, nice to see the trails you have out there.
Chad is the man, and your tshirts are one of the more comfortable that ive worn but for some reason the midsection got tight lol. I have the 2"kit you guys sell and i dig it. Ive started doing more wheeling with my frontier since i got a commuter car for work and realistically a 4" kit would be perfect if you guys could come up with it. I dig the idea of the titan swap the big killer to me is the wheel track. Wide front narrow rear.
I've got a semi stock 2012 pro 4x and I love it offroad only issue I've had was the transmissions. I've had 3 in mine, warranty covered the 3rd one due to faulty install from mechanic on the 2nd, when they installed the 2nd tranny there was a pressure plate or something misaligned so when I put it into drive it took up to 10 seconds for the transmission to build enough pressure to actually engage drive which would lead to a huge spike in pressure like a cavitation on a boat causing the truck to almost do a wheelie from the force, needless to say the shop replaced the 2nd transmission and got another new transmission. 2 years later no problems at all this truck is one of my favorite vehicles I've owned its fast light and nimble on these AZ roads with tons of switchbacks and gravel roads, never been stuck once other than burning out the transmission that 1 time, but i was pulling my 19 foot trailer into an area id never been and shouldnt have taken a traiker too!! but since that incident I installed a trans cooler and haven't had a single problem. Brakes are something to upgrade because their brakes are terrible. Great trucks if you can get one that hasn't been beat up. Mines beat up but it's because I use it like it should be used, I won't sell it!!
I'm 15 months Titan Swapped using the Gen 1 Tundra Bilstein shock with 1998 4Runner coil with the custom tophat. No issues at all.
Custom tophat is the key! Glad it's treating you well :)
Where can I buy a custom top hat? What’s the issue with the OEM top hat?
@@adrianleonguerrero4599 AllDogsOffroad, they make a custom tophat if you go the route of using a 1st generation Toyota Tundra shock
So would you be kind enough to list what set-up you would recommend for a titan swap parts purchase, install and play list. Thanks for the info. Awesome vid.
We have a parts list made up on our website. Here's a link to our stage 2 kit - www.alldogsoffroad.com/alldogs-offroad-stage-2-tswap-kit-for-2nd-gen-nissan-frontier
I'd suggest extended rear brake lines because having a little slack in the line will allow a log to pass your line by rather than hit it and have no slack or movement to pivot/deform. Because I've done just that. Log popped my brake line right off.
I did a titan swap on my 2010 Frontier had it for 4 years going strong and i don't regret anything
Nice information. Would most of these rec's apply to a titan swapped Xterra?
Yes! Almost all of the info covered would also apply to a Titan Swapped Xterra.
@@AlldogsOffroadCoop Thanks! Looking forward to purchasing my Titan Swap kit through Alldogs! Keep the good vids coming!
I am coming up on on being titan swapped for 6 months if had to do it again with the Bilstein 5100s I would skip the moog coil springs for the front and go with the Old Man Emu ones instead because the moog ones saged after only having them on for about 4 months with no extra weight on the Front end
literally just waiting on your Performance leaf pack to come back in stock! very anxious to replace my flat leaf pack
So how did you do an alignment after it was all said and done? Do you go off titan specs?
Super informative video! What axles did you use in the r180 diff? I'm getting ready to swap my 08 Xterra and that's my one hang up.
Use Infiniti qx56 axles, got my pair off of rock auto for like $270 give or take shipped to Hawaii
Good feedback, I'm on my way to TS my Xterra. Unless I missed it, did you also swap onto the M205 all these years or still on M180?
Still on the r180 for now but have an M205 in the shop ready to go in. Just got to find the time
That titan swap is genius.
Any six inch lift lowers the cross-members, so you lose center clearance and it's never going to articulate like that.
If you're actually off-roading, I can't see how a 6 inch box lift kit could work better. Might be fine for a pavement princess but not for the trail.
Thank you very much for the information. The information is invaluable. I do have a few questions I hope you'll be able to help me with. So i'm from Trinidad and Tobago and the Nissan Frontier is a common truck here. I myself have the 4x4 version. I've never heard about anyone here doing a Titan swap here. Is the swap recommended for someone who doesn't mainly off-road? What upgrades would you recommend that would improve on road for the vehicle as it's primary function but functional on the off road? The information you gave I extremely appreciate. Thanks
Always wondered how titan swapped vehicles would hold up. Have had my frontier titan swapped for a year now and it still rides good.
One problem I am running into now is that the front left coil is rubbing up against the spring. I probably bent the lower control arm(oem titan) offroading the Devils Stair Case in Sedona AZ last month. Other than that everything else is solid.
When we did pink jeep I always wondered if my frontier could handle broken arrow. How was your experience?
@@sc77 if your frontier is titan swapped then you will have no problem doing broken arrow. Still may be able to do it in a stock pro4x but you'll need to take the lines much slower.
Only reason I believe I damaged the lower left control arm is because I was wheeling out there at night and hit a line the wrong way. Hope this helps you.
@@guillermosalazar4791 thanks for the insight. No TS here. 2" 5100 lift w/33s. Pretty gnarly trail. I'd love to try it though
@@sc77 you'll have no problem with a 2" and 33's. You should definitely give it a try, I may even be up to do a trip in April if you want to tag along
Awesome video with lots of details. Thanks!
Can you talk a bit about sway bar removal. I'm assuming that's both front and back. How does it affect daily driving and towing?
Glad you enjoyed the video! You can run a Titan Sway bar if you want, but since the purpose of a Titan Swap is wheel travel, most people leave it off for better articulation.
You'll see more body roll but with proper coilovers it's not too bad
@@AlldogsOffroadCoop I hate to say it but I spent more time on the road than off =/. Would love a way a sway bar disconnect, even if it's not electronic like jeeps!
@@dmitrym2922 Disconnect it and drive around, you won't go back. It really doesn't do much, just makes things more uncomfortable. I've been running no sway bars for 2+ years, daily driving.
Did you not t-swap out your front diff as well? The Titan's is heavier duty and doesn't let the cv axles slide out since the bolt up.
the truck still had the R180. i dont think he ever broke any axles or had axle issues. usually going to a larger tire than a 33 or running an incorrect t swap length coilover will cause issues.
Awesome info, thanks! Did you have to do any custom bumpstops in front or do the ones that come on the lower control arms work okay?
We normally use Energy Suspension bumpstops. We have them on site! :)
I’ll be calling soon getting an xterra once I find one local and can’t wait to go trail riding not in a full size.
Side not. Looking at the leaf packs are they spring over or under for the xterras?
Thanks for the great follow up! I know you mention the wider front offset but if you ran say a 2 inch wheels spacer in the rear would that not be close to the same as the titan arms?
Late reply but I run 2inch spacers on the rear of my titan swap
Hmmm. I really enjoyed this overview. I’m about to start sourcing my own titan swap parts myself to get the ball rolling.i have a 2nd gen ‘11 Xterra and I know Frontier and X’s share almost the exact same chassis and the biggest difference between them is the leaf packs, but I was curious about your part in the rear extended brake lines. Since we have similar chassis, do you think I’d need extended rear brake lines when I want the lift to stay within 3”-3.5” of lift in the front or rear? My X is entirely road use right now as it’s my daily until I get me a lil 4 banger to daily but I just wanted to get your opinion on maybe leaving rear extended brake lines stock for an Xterra vs just getting 18’s or 20. Great video again man! Really love the companies connection and interaction in the community! Super helpful!
Glad you enjoyed the vid! With the Xterra you will have to make some bracket modifications or run extended lines rear.
@@AlldogsOffroadCoop awesome thanks for the response!
What tire sizes have you run on the 18-inch wheels? And do you think 18-inch wheels are ok for off-roading, with a 33-inch tire?
What was the spring you were running in the front when you had the Bilsteins?
Yea dido ???
Why not just put money into a 1st gen tundra? Is that a good platform? I like the size
heres an interesting question... with just the titan swap, how much has your fuel economy decreased? im wondering if the potentially heavier components and somewhat change in aerodynamics (because of the lift), has the fuel economy decreased a ton.
it really depends on your tire choice. tires effect your mileage more than a lift will. Chad's 3rd gen only lost a couple MPG's with his titan swap, whereas Kyle's 2nd gen has lost 3-4 because of tire choice
@@AlldogsOffroadCoop this makes sense, actually. my wife's 2006 xterra offroad is stock but we have bf ko2s and our fuel economy went down to about 15mpg combined city/highway. not much worse than the reported mpg online. Thanks for the info.
im looking at doing just the engine and transmission swap. was there any issues with wiring etc? Thanks
Is there any way to get extra lift with the Titan Swap? I would like a total of 6" of lift. Trying to fit 315/75/16 like I had on my 1st gen tacoma.
Titan swaps will give 3.5 to 6 inches depending on the springs/shocks used.
Also, is the titan brake line work fine on the frontier titan swap or would I actually need an extended brake line?
Do you know anything about the Nisstec titan swap? Was looking into that as well as the all dogs one
How do you keep your rocker panels and paint looking so nice? I feel like the wider track width could be a nightmare for keeping it clean and free of rock chips
Silver paint and a prayer
What would be the next best suspension/lift setup if I don’t wanna lose out on so much on road driving dynamics? I love hitting trails and whatnot but my Xterra is also my thousand miles road trip vehicle...
Totally depends on budget and goals. You can't go wrong with our Bilstein 5100 complete kit but if you wanted to go crazy you could run a Radflo extended travel kit
I have the bilstein 5100 kit w/broverland packs. I know Titan swap requires a taller strut, the 5100 kit qualifies? It’s 2” taller?
What’s the best way to get in touch with you I have questions on what I’m wanting to do with my frontier
Chat via our website or Call us!
I have a 2018 sv frontier longbed and I want to titan swap it. Will I need to purchase different cv axles?
Not sure where you got the number for the $2100 for the Titan swap….. the radflow coil overs are that much by themselves.
I have a problem connecting the sway bar link do i need a titan sway bar and sway bar links or the frontier should fit? Just a lot of body roll
You would need a titan swaybar if you're titanswapped.
Are there shops that can do this? Between work and home maintenance a mod like that would take me 2 weeks, and since its my DD I can't have it down for that long
If I ordered a titan lift kit like a 8 inch would it bolt up to the frontier
What differentials do you have?
Titan inner/outer tie rods connect to the frontier steering would be sufficient? that's all I would need for the steering to work?
Yes inner and outer thread right in, better, reliable and cheaper to find imho, any brand or replacement would work
Wath kinds off cv axle do you have a qx80 axle ??
Have you found a way to mount your sensors another way instead of letting them dangle?
Are you referring to the ABS/Wheel Speed Sensors in the rear? Haven't had any issues with them but if you wanted to you could splice the line and make it longer
Don’t know if you mentioned but are you regeared or diff swapped?
This truck was not regeared, but the Titanswapped blue frontier on our channel is.
Bruh how much mpg? My stock pro 4x is getting around 14 city and 19-22 highway, running some pretty agressive all terrain, 265. I'm looking to titan swap as well but I do alot of normal driving too. Plan was to probably just buy a beater accord and really focus on frontier
I think I’m about to dk the same thing
Did you titan swap the motor and transmission?
Does anyone know what flex line to buy?
Great information I just got my Frontier and it has no idea how f****** it is hahahah. Jk I can't do this to my vehicle but I can if I get another one
how good is it on highway?
After 3 years can you please provide me the part I will need to get 2006 frontier titan swap ... Thx a million
part numbers are listed on our website.
Steve, what are your coilovers set at for ride height?
I have them set pretty low...sitting around 3.5" of lift right now.
@@AlldogsOffroadCoop What is the maximum recommended height? Thanks
@@jonathonstaggs9916 You can go up to 4.5" of lift on a Titan Swap. Anything beyond that sacrifices suspension travel and ride quality
@@AlldogsOffroadCoop Alldogs should make a bracket lift/titan swap kit!
Just wanted to know if I can still tow with a titan swap?
Sure can, but remember that any dramatic offroad capability improvement will change it's road manners
@@AlldogsOffroadCoop just making sure a bump won’t have me swerving off the road with a 3,500lb trailer and SXS. Also, do you run 33’s or 35’s?
Did you switch out the rear axle for a pro
It's on the to-do list but the c200k has been holding up just fine so far!
@@AlldogsOffroadCoop On that, what's your thought on putting a loc rite in this rearend?