THANK YOU FOR THIS DIY!! Really helped me do the install myself. I liked your straight and easy instructions, no chatter and dramatic video effects like other youtubers lol
Really good production and editing dude. super informative without any BS, just got a G30 540i and I KNOW I will be checking out your channel constantly haha
Thanks for this very clear tutorial. I bought the original taillights but without those wires and pins. Please give me a link where I can see exactly which pins they are. I want to do the retrofit and I can't figure out which pins to buy or which socket to remove those four pins, which I need to use for the wires for the retrofit. Thank you!
I have a set of BMW F15 taillights that I didn’t know was Euro. The amber turn signals also are the brake lights. 😣 I can’t find a solution to fix them anywhere.
Thx for the TUT! Awesome!! So after installing and coding, will i have no error messages in BC? Many complain about the brake lights appearing before starting the car. I think the method of connecting the additional PIN directly at the back is perfect! What is this actually needed for? Many thanks for your replies!
You definitely can If you like but this route is just as reliable and you save on install time and tearing apart your interior to get to the BDC. I rather keep everything in the rear!
Hey FullBoltOn, been watching you & TK's Garage for a while now. Quick question about your LCI tail light retrofit. Your website says plug&play harness, no repin. Is that no repin needed for both the inner tail lights & outer tail lights?? And also do you still do the coding as well? I'm assuming once the tail lights are ordered, I can email you guys to setup an appointment to do the coding?
What's the clip at the end of the 5 series driving through people... did someone get hit accidentally or where is that full video. I have the M5 and am so conflicted. I like both taillights equally. I do know that if you get a headlamp controller with the rear fog your vehicle is most likely equiped and I checked that. But chances of using rear fogs are low and too many use them to just be fancy or blind drivers behind them. But as you have a FL plate - we do get some rainstorms where visibility does matter a lot - I know I wouldn't consider upgrading the headlamps because they're perfect except maybe the anti dazzle coding would be cool. Just not a fan of BMW going away from circle angle eyes to thes L shape or upside down L shape design. I prefer the circlar look for some reason. BMW's design has changed so much in the last 2 decades I feel the next M5 won't be my cup of tea and I plan on holding onto my F90 M5Comp! Thanks for the tutorial and videos though!!!
Hey, i want to do this to my 2020 m550i. Can I hit you up on instagram to talk about it with you? Just dont understand the codine part but I can do the install no problem. Thank you sir!
THANK YOU FOR THIS DIY!! Really helped me do the install myself. I liked your straight and easy instructions, no chatter and dramatic video effects like other youtubers lol
hello. Did you do any coding after installation? I am curious about the coding coordinates. Thank you.
Really good production and editing dude. super informative without any BS, just got a G30 540i and I KNOW I will be checking out your channel constantly haha
I hope this helps all who are looking to retrofit. Enjoy!
With the plug and play kit do I still need to do coding? Or run a wire to the bcm like in bimmerdocs video
Doing the God's work, once again!!!
Much appreciated my brother 🙏
Hey my friend!! I need your service for this retrofit 🙏👍
Thanks for this very clear tutorial. I bought the original taillights but without those wires and pins. Please give me a link where I can see exactly which pins they are. I want to do the retrofit and I can't figure out which pins to buy or which socket to remove those four pins, which I need to use for the wires for the retrofit. Thank you!
Is there much diffrence between the oem and amazon set of tail lights? Cuz the price diffrence is huge
I know it's late but from what I know the amazon taillights can get water in them
Thanks yet again! Can you list the coding parameters that need be changed? Awesome tut BTW!!
I truly wish i could!
@@FullBoltOnGarage No worries bud!
I have a set of BMW F15 taillights that I didn’t know was Euro. The amber turn signals also are the brake lights. 😣 I can’t find a solution to fix them anywhere.
hello is this the same procedure for a Euro spec pre lci retrofitting LCI Euro tail lights?
Thx for the TUT! Awesome!! So after installing and coding, will i have no error messages in BC? Many complain about the brake lights appearing before starting the car.
I think the method of connecting the additional PIN directly at the back is perfect! What is this actually needed for? Many thanks for your replies!
Your exhaust tips is away too out. Will be nice to adjust a bit more inside :) will look good
I cannot find the coding for these lights that you done. Can you show me please exact codings that you have done to the car?
Hey man, Is the pin layout for installing US LCi taillights the same as the Euro Taillights?
hello. This is Lee living in Korea. Do I need to do coding after installing the tail lamp? Can you give me the coding link?
I’m curious what gauge of wire did you use?
do you have a link to exhaust tips/exhaust ?
So you don’t have to run wires to the bdc?
You definitely can If you like but this route is just as reliable and you save on install time and tearing apart your interior to get to the BDC. I rather keep everything in the rear!
Just to confirm.Are You using EU tail lights for US cars with this arrangement?
Yes! Spot om
From where you bought them?
Hey FullBoltOn, been watching you & TK's Garage for a while now. Quick question about your LCI tail light retrofit. Your website says plug&play harness, no repin. Is that no repin needed for both the inner tail lights & outer tail lights?? And also do you still do the coding as well? I'm assuming once the tail lights are ordered, I can email you guys to setup an appointment to do the coding?
Guys, how to code tail lights (all 4) glow with DRL?
If you know let me know
hey bro exhausts tips u got
I am interested in buying this. Could you confirm that you are selling the genuine BMW taillight with plug and play harness included?
Hey! Yes they are on my website and genuine BMW oem from factory. You'll be the first to break the seal!
Does it also work for EU tail lights for the G31?
im looking around for a video of the g31 too. but everyone seems to be doing it on a g30. guess we'll keep looking...
@@meteor_yt7500 Friends, you found the answer and tell me, I also want to replace the G31 taillight😬
What's the clip at the end of the 5 series driving through people... did someone get hit accidentally or where is that full video.
I have the M5 and am so conflicted. I like both taillights equally. I do know that if you get a headlamp controller with the rear fog your vehicle is most likely equiped and I checked that. But chances of using rear fogs are low and too many use them to just be fancy or blind drivers behind them. But as you have a FL plate - we do get some rainstorms where visibility does matter a lot - I know I wouldn't consider upgrading the headlamps because they're perfect except maybe the anti dazzle coding would be cool. Just not a fan of BMW going away from circle angle eyes to thes L shape or upside down L shape design. I prefer the circlar look for some reason.
BMW's design has changed so much in the last 2 decades I feel the next M5 won't be my cup of tea and I plan on holding onto my F90 M5Comp! Thanks for the tutorial and videos though!!!
Where do I buy them from
I’m confused. What is even the difference from plug n play us lights to these oem euro?
The logo! Non oem won't have BMW stamped
something for BMW G31?
Also for g31?
Where do I get the coding info?
Great video, is this LED tail light compatible with G31?
How to code?
Where are you located and how much can you install this
Orlando Florida and its $150 for installation plus coding. 45min to an hour in total!
Does it require coding?
It’s supposed to… I wish it didn’t
I want to do this but i'm in europe and have pre lci europe tail lights, can you still help me with remote coding ?
Yes no problem
Damn, well, I know what else is on the list. LOL
Nice man!! Looks pretty simple right?
So Tempting😂😂
Do it!!!!!!!! LOL
Dope video. I just re-pined mine but realizing I need a 5th pin. Lights work but don’t function how they’re suppose to.
connect the 4th & 5th toghether
👍
Welcome light wack
Hey, i want to do this to my 2020 m550i. Can I hit you up on instagram to talk about it with you? Just dont understand the codine part but I can do the install no problem. Thank you sir!