The new Meadow map is looking real good, and the ruins are really great for practicing lines. gotyta say 2.0 is looking real good!. Thanks for watching
I'm not sure, haven't tested it myself. But the rc 3, (that's the grey one for the avata2 right?) If so I think it should work, test it out in one of the free simulators. If it works there it should work here as well. Thanks for watching.
@@RaukFPV thanks for replying, yeah getting it this week so will test it out!! Just tried my Xbox controller with Uncrashed and it’s acting all weird, controls not working like I want them to.
For the Xbox controller you need to make sure it's set for gamepad mode which sets the middle throttle as 0, other that than make sure the sticks matches the screen.
@@RaukFPV thanks will try that. Getting the RC3 this week so that’s the main thing I wanna get working as it will be the controller I’ll be using with my drone. Thanks again!
It might feel good, but Tryp really has set the bar with actual Betaflight SITL and more complete physics modeling. I loved Uncrashed for a while until the new Tryp patch.
yep. i agree with you 100%. uncrashed is not bad. but tryp is just a lot better, and the implementation of betaflight, pid loop data just makes it amazing!
level- is where to drone will return and level it self out when you let go of the sticks, similar in some ways to dji drones. Acro- is where the drone is in full manual mode, and the drone will "stay" where you leave it, so if you tilt it and let go of the sticks it will remain tilted. 3D- is where the motors can spin in both directions, so motors will be 0 at center throttle, a few people use this mode, and it makes you able (if you can control it) to fly upside down. basically control the up and down movement of the drone. hope this makes sense, else feel free to ask again :) I fly in acro most of the time, i was experimenting with flying in level (called horizon in betaflight) when flying cinewhoops, but almost stopped doing that.
I'm using 144 fps as max. When I was using a 60hz monitor. It was just to avoid screen tearing. I am not using my goggles for simulator, as I'm using dji goggles2.
@DigitalEndeavors because in games, often the calculations are made on a per frame basis, and getting the most calculations can sometimes help in precision.
It Looks really good. Haven't had enough time yet. But it seems more and more people are asking. Maybe I need to test it some more :) thanks for your comment
it depends: For freestyle: if you have a good pc, i would go with Tryp otherwise Uncrashed. (if you have a mac, i have no idea how any of them perform. For racing: Velocidrone, there isn't much of a choice as the racing maps are released there.
And now with multiplayer !
:O i gotta check that out ASAP :D
bando was easily my favorite map with the update it is awesome endless lines love it. 🔥🔥🤘🤘
oh yes forest bando is amazing now, while urban bando can become a bit too much in my opinion.
Quite a few good maps to chase from now. The new Meadow map is my fave at the moment. Really good seeing the devs doing a good job🎉
The new Meadow map is looking real good, and the ruins are really great for practicing lines.
gotyta say 2.0 is looking real good!.
Thanks for watching
You are trying to crash in the Uncrashed simulator =) It speaks for itself)
🤣
Which is good simulator for cinematography. Uncrashed or tryp or liftoff?
I'd go with tryp if you have a powerful PC. Else I'd go with uncrashed.
great video thank you!! can you connect DJI RC3 do you know please? and does it have the same modes etc?
I'm not sure, haven't tested it myself.
But the rc 3, (that's the grey one for the avata2 right?) If so I think it should work, test it out in one of the free simulators. If it works there it should work here as well.
Thanks for watching.
@@RaukFPV thanks for replying, yeah getting it this week so will test it out!! Just tried my Xbox controller with Uncrashed and it’s acting all weird, controls not working like I want them to.
For the Xbox controller you need to make sure it's set for gamepad mode which sets the middle throttle as 0, other that than make sure the sticks matches the screen.
@@RaukFPV thanks will try that. Getting the RC3 this week so that’s the main thing I wanna get working as it will be the controller I’ll be using with my drone. Thanks again!
could you please teach us straight dive down to tunnel 🤟
Um i not even sure how to do that perfectly myself 😅
It might feel good, but Tryp really has set the bar with actual Betaflight SITL and more complete physics modeling. I loved Uncrashed for a while until the new Tryp patch.
yep. i agree with you 100%. uncrashed is not bad. but tryp is just a lot better, and the implementation of betaflight, pid loop data just makes it amazing!
Does it also include the battery management part or you can fly indefinitely?
Hey, There is no battery emulation in Uncrashed unfortunately.
Please Help, my DJI mini 2 se cant not conect to my macboor air m1
unfortunately, the dji rc( from the regular dji drones) cannot be connected to the simulator
i realised you can switch between these kind of modes e.g. acro, 3d
what are they and what do you use?
level- is where to drone will return and level it self out when you let go of the sticks, similar in some ways to dji drones.
Acro- is where the drone is in full manual mode, and the drone will "stay" where you leave it, so if you tilt it and let go of the sticks it will remain tilted.
3D- is where the motors can spin in both directions, so motors will be 0 at center throttle, a few people use this mode, and it makes you able (if you can control it) to fly upside down. basically control the up and down movement of the drone.
hope this makes sense, else feel free to ask again :)
I fly in acro most of the time, i was experimenting with flying in level (called horizon in betaflight) when flying cinewhoops, but almost stopped doing that.
So after both have had large updates this month, what do you recommend for practicing Uncrashed or tryp?
i would pick tryp right now.
Considering only the realism of the physics, would you still prefer Tryp?
whats the point to play at 240 fps + when goggles are 100fps refresh rate?
I'm using 144 fps as max. When I was using a 60hz monitor. It was just to avoid screen tearing.
I am not using my goggles for simulator, as I'm using dji goggles2.
The real question is why play without a frame limiter when your camera on your drone has a Frame cap. :P
@DigitalEndeavors because in games, often the calculations are made on a per frame basis, and getting the most calculations can sometimes help in precision.
Have you tried a sim called Fpv Logic? It looks pretty good as well.
It Looks really good. Haven't had enough time yet. But it seems more and more people are asking.
Maybe I need to test it some more :) thanks for your comment
@@RaukFPV cool 👍👍
Could i disarm the copter in that simulator?
uncrashed dosent have arm or disarm unfortunately.
Which FPV Simulator would you recommend?
it depends:
For freestyle: if you have a good pc, i would go with Tryp otherwise Uncrashed. (if you have a mac, i have no idea how any of them perform.
For racing: Velocidrone, there isn't much of a choice as the racing maps are released there.
Hi, does Uncrashed fully support an xbox controller?
Hey, same as with Tryp, it should work with the xbox controller, but unfortunately i cant test it.
The facts they don't have 7inch props is what is the deciding factor. No idea why they don't just add it
Yes that is a big issue. Tryp have just added their preset for chimera7 which is pretty nice :)
Hi ,I would like to request link program download .
hey, Uncrashed is on Steam, link to the steam store: store.steampowered.com/app/1682970/Uncrashed__FPV_Drone_Simulator/