Peugeot 308 how to wire dash cam to fuse box,simple guide.
HTML-код
- Опубликовано: 16 мар 2018
- Step by step video showing how to install your dash cam to the cars fuse box, so that it goes on and off with the ignition and has no cables hanging down. For models 2013 to 2018
Авто/Мото
Followed the clear step by step guide provided in the video and completed the job without issue.
Brilliant tutorial and was prepared for the fiddly part of connecting feed wire to the fuse box thanks to this.
The comments from other viewers also ensured I didn't disconnect the wires in front of the fuse box for easier access, which would have seemed a perfectly reasonable thing to do, without knowing the awaiting pain when reconnecting the wires. Thank you.
Brilliant! Followed your tips to the letter and dash cam worked first time 🎉
Im going to do my dash cam this week for the rear window with a nextbase as i already have an RAC dash cam for the front,looking at this video it looks reasonably easy to fit in my 2014 peugeot 308.
Thanks. Did my 2015 307 today and this really helped.
Great tutorial. Just finished the installation of my dash camera (front and rear). I encountered a few problems with hiding cables in the head liner as i didn't know how far should I push the cables. Then I couldn't find a right fuse diagram for my car (or I just don't know how to read them).
Once everything was set up, I couldn't get to power up the unit. I spent like hour changing and replacing fuses. Turns out the micro USB adapter was disconnected xd.
Anyway I get there at the end.
I was wondering why my DAB radio started having reception issues, I was also wondering how to keep the cable in the head liner, thanks so much for the tips !
@Jason: Where did you install the active antenna? Under the car sky or behind the A-pillar trim?
Hey, how did you remove the plug that is sat right in front of the fuses? It feels like it's clipped on, but I cannot unclipped mine. Thanks.
hello, thank you for your video, can you tell me the located fuse inside the box ? letter& figure ? and his "Amperage" , thank you for your help, i will try to set on the 308 2019, thank you.
You need to find the 'hot' wire on the aux fuse on the fuse box (bottom or top) to identify which way to put the 'piggy back' fuse in or you may bypass the additional fuse rendering it useless. If installed incorrectly, you will power the accessory without the fuse. Current must be supplied to the opposite side of the fuse where the accessory wire exits.
As long as everyone puts the spur in the same way as the video shows they will be fine.
It’s easy to over complicate these how to guides and seeing as I get around twenty questions a day that’s the last thing I need.
Your right but as someone with 32 years in the trade to much info can be to confusing.
I have a pre-install dashcam cable by the mirror but there is no power in it. Do You know maybe which fuse will be responsible for it? or haw to find it? Peugeot 308 2019
Hi sorry to bother you just saw your video trying to install on a 2010 308 found acc fuse when i test it with ignition on multi meter does not read any volts the socket is working but dash camera does not come on any ideas what i am doing wrong .
Thanks a lot
i´m thinking in intaling a 2ch dashcam on my 308.
can you make a video showing how to cary the cables to the back window?
thanks
Try my rear cam install video -
ruclips.net/video/m2GNqJffZKA/видео.html
Can you get down under the glove box and behind to the head unit from the fuse box compartment?
Not really to crowded.
Hi Used your guide to fit a Dash Cam to a Peugeot 208. Unplugged the Green Box in bottom left of fusebox to gain access to the fuse. When I plugged this back in I now get a engine management warning light coming on. Has anyone any ides if this can be easily reset or is it a software issue that will require a workshop to rest the computer chip. Thanks JonJon
Does sound like you will need to get the error code removed from the ecu now. This can be done at most garages.
Great !!!
This video is very useful, thank-you! I’m going to wire my dashboard camera into a fuse that’s always on so that I can enable parking mode - can you recommend which fuse/accessory to use for this? I drive a 2015 Peugeot 308 GT. Thanks in advance!
Anything constant so maybe central locking or ignition key feed.
PJs projects “Keyless entry & starting system”? That’s a 5A fuse. Would that work without effecting the keyless entry? Or there’s “Locks”, which is a 30A fuse. Which would be best? Thanks for hour help.
@@HowdyPlayerOne did you ever figure this out?
Hi where are you based as I would like to get my dash cam installed by you
I sub to companies that have a few cars each day that need working on and so never get involved with one off jobs. A lot of the larger retailers have mobile fitting services which should be able to help you.
I installed a dashcam watching your video. It would start recording when I turned key in ignition but recently it has stopped working. A message came on screen saying low battery and then it switched off. I had thought it was being powered by car. Any ideas?
I would say a wire has come loose. Maybe the earth wire?
@@lewi981 thanks I will look into that. I had a hard job trying to earth it because the the horseshoe connection was too small for the bolt. I got two washers and sandwiched the horseshoe connection between them and taped it up with electricians tape and then bolted it in. It may have worked its way loose going over bumps.
Is a 5 amp fuse ok for the Dash Cam? Or does it have to be 3 amp?
Either a two or three amp is best because the fuse has to be a lower rating than the power cable in order to do it's job if needed.
Thanks - just ordered a kit of 120 fuses (20 x of 5 through to 30) - but nothing lower! Might have one in the glove-box though...
At 10:40 how do you unclip the fuses?
The fuses just pull out from the fuse box,I use long nose pliers due to them being hard to reach but you do get a little plastic tool with the car to pull them out with. Check your owners manual to see what I mean.
Peugeot 207 is impossible to do this,I found a good earth point,I pulled loads of fuses where power is off with ignition off,pulled cigarette lighter fuse added the piggyback in both directions and no cigarette lighter,put the fuse back and it works,I've tested the piggyback with a meter and shows no faults
Wow. The fuse box is real mess !
Ive done all this but im stuck on the fuse i have tried every single fuse and none of them turned my dashcam on, any help for this? 😊
If you have tested the fuse output with a meter and know 100% power is going out to the power cable the. It is one of the following.
1. bad earth
2. Faulty power cable(most have a 5v converter in them)
3. Faulty camera
4. Inline cable kit fuse blown.
@@PJsprojects I earthed it in the same place as you did, and I know the camera works because it comes on when it's connected to cigarette lighter
Can you do a Peugeot 3008 plz
If one comes in I will upload it.
Where are u based?
Uk based doing contract work for large companies.
Can you install my dashcam lol
Just do the corporate stuff chap.
No chance to find some useful ....