JBL Pulse 2 - Repair and Teardown Advice
HTML-код
- Опубликовано: 6 апр 2017
- If you think about opening your JBL Pulse 2 Speaker, then you better watch this video before you do it.
I explain how to open it, and how to take it apart. Are you able to get it back together? I am not sure, but see for yourself.
All the RGB LED's in there, and the amount of screws used in the speaker make it pretty expensive. Think twice before you break it! 
Хобби
I hope everyone is aware of what happens, when you poke the battery by accident?
Thank you so much for this video. I will probably not even bother taking mine apart now. Like others have said too, I have taken apart a lot of electronics, but this is ridiculous.
excellent explanation
Nice video overall; very educational. Multiple camera angles would have helped much. Just moving from front to top view would have helped. The wide-angle reduces a lot of detail unless you've got a large monitor and are using an HD stream. Thank you for contributing, of course.
It seems like JBL has learned allot from the pulse 2 to the pulse 3. The pusle 3 seems to be much more serviceable compared to the older model. The pusle 3 is more modular instead of being all glued together like this one.
the spraypaint of the bottom part of my pulse 2 came off after a short time after i bought it. bought on 21st of June 2016
I'm wondering on how to fix the Bluetooth, when I connect it will disconnect a little while after please help
my speaker has lost tts light... there is no light coming except those battery indications and switch lights. those led strips are not working what would be the probable reason ? the battery is not not charging properly. if i plug usb it works for 15 mins and then turns off. suggest me what would be the possible defects and what to do?
i connected it to my phone and played some music but the speaker doesnt have any sounds only my phone why?
Good shit man.
Holy crap, are you kidding me?!?
I took a lot of stuff apart, but this is ridiculously difficult. Why don't they just dip the entire thing in hot glue or even better that black goop...
How did you take the rubber that covers the buttons off? Do you have to heat it up first? It's really stuck in there. I m struggling with it because the rings on both sides were glued tight. =[
Thanks for the video btw. I am in the process of trying to replace the broken micro usb port and this has helped.
Jamison Just pull hard, I didn't have to heat it up.
How did you take off the rubber ring?
just pull it out, it is glued on
You make it look way easier than it is. I already destroyed one of the rubber rings and the outer cover won't come off. I suspect I'm going to destroy it or injure myself trying to follow your instructions. Oh well. Thanks for posting. I'll keep trying even if I destroy it. It would go in the trash otherwise. Edit: It went in the trash.
well, i said it at the beginning of the video: opening that speaker is not for the faint of heart. Sorry you destroyed yours. The newer models are way better to take apart.
@@mygiguser I hate to say it but I saw a couple of other videos after yours and they were totally successful. I guess you were a bit too early to try this terrible fix.
@@mygiguser Not blaming you since clearly it was your first attempt, and you destroyed yours... but you might want to mention there are better tutorials out there that show the whole process on a previously unopened device that are much less destructive. I wish I'd watched a few different ones before making my attempt.
what is the material of the part you took out at 3.48 ?
hi there I have two of these that have the same issue, they don't seem to stay connected via Bluetooth for longer than a few seconds, also it will work properly via aux either it doesn't stay on aux for more than a few seconds, sometimes I can get about a minute of use out of them that's it, one was bought from jbl and one from eBay but they both have this fault, jbl have been no help at all, what could I do to solve this issue?
ghost_who_walks ! Maybe it is stuck on demo mode
But idk its just a guess
I had the same issue. You need to update the firmware on the speakers via the JBL App.
where can I buy the charger board for my pulse 2?
I cannot find it anywere aswell
Anyone found one yet? Needing to replace the charge board on mine...
I need to repair the usb power socket, on this pulse speaker
Try to go to a cellphone repair shop. They sometimes repair this kind of stuff. Or better call the JBL support, and ask how much the repair is.
@mygiguser
Actually, JBL (in the USA at least) does not offer service for their bluetooth speakers. They will replace them if you can prove they are under warranty but if not, you are on your own.
As of 2017, there is a listing on ebay for someone that offers replacement service.
Why do you have two of them btw?
MegaSafetyFirst Well, I ordered a second one on EBay, because I wanted to show how to play both at the same time, but it was not working. As I took it apart, I realized, that nothing could be done to fix it. Should I send it back? What do you think?
Cool, I didn't know you can play two at the same time. How does that work?
Sure, dip it in glue and then send it back. They won't be able to tell the difference :D
Rusty Stafford Good to know, thank you!
Wait if they were only two speakers facing one way how tf is this speaker able to play 360 degrees
Its called: lying
Hello I have a pulse that will not charge, can you do a report for this speaker , I'll pay for the job
Sorry, I don't.
give to me
I will never buy any JBL products. Bought a brand new JBL pulse 2 and it failed after 2 weeks. I can't pair it anymore with any devices, when I press on bluetooth button the litghs just start flickering and it does not respond. Tried to reset and upgrade firmware but it does not work. Waste of money :(
Cel Mai Sincer Moldovean should have done your research and bought yourself a better speaker *cough cough jbl charge 3 or pulse 3*
Tout a été conçu pour ne pas pouvoir être réparé :(
C'est très vra!
À bas l’obsolescence programmée !!!
Vous n'avez pas à l'acheter!
☆로?.☆☆☆☆♧
I will never buy another JBL , first the charging port stops working with careful adult use in less than 2 years, and then if you want to repair this basic thing youll need luck to not fuck it up during the teardown....
I'm with you. I got to step 3 where he "gently removes" the covering all down the front, and mine won't budge. I'm either going to destroy this thing or give myself an injury trying to get it apart.
quit be a lyier.
GPC Tecnologia what is a lyier? Is that even a word?
This is complete crap. "Its only a little bit glued"
Ich hasse diesen scheiss jbl pulse 2
warum nur?
@@mygiguser ist der 3 besser?