Battery Replacement for JBL PULSE 2 (How to step-by-step)
HTML-код
- Опубликовано: 22 ноя 2020
- This video explains in step-by-step instructions how to replace a defective battery on a JBL PULSE 2 wireless Bluetooth speaker.
The process is a lot easier to. perform with these easy to follow step-by-step instructions. Also make sure to remember which screws go into which locations. There are a couple of different types of screws and they are easy to mix up. Хобби
The battery on Amazon:
amzn.to/3htmlmX
(Associate link)
very good video ! The 2 red wires coming out of the batterie are soldered together on the BMS, same for the 2 black wires. You can put them together and in the order you want...
Thank u for the clean explanation of step by step procedure. Will do mine soon i just finished replacing battery for my JbL xtreme.
Great instructive video. Much appreciated. Well done.
Thanks so much for a real good advise .
Muchas gracias muy bien explicado bendiciones
Thanks a lot.It was very helpful.
Absolute pain in the ass, no thanks. In the recycling bin it goes. Sound is trash by today standards anyway.
But great job on the video, you are gifted. 🙌🏻
Same for me... Too bad it won't recycle, probably just burn or sit on a landfill... That's a shame that JBL made it so difficult :(
difficult than any phones,thx for video and just throw the speaker in the bin
Tried this thanks to your directions. Unfortunately I grabbed the ribbon cable with tweezers to guide it into the housing slot. It smoked a little at the cable end. stupid move on my part.
Cool dude
i have same speaker it sad that they make not from direct power but from battery power now my battery dead and to replace need be this pro
I agree with you. It would be a lot better if the speaker was able to work just with the USB cable connected.
Replacing the battery is very complicated on this model.
nice work
Thank you. I appreciate the feedback.
bravo 👍 👍 👍 👍
What battery am I looking for, for this replacement? Also I clipped the charger port cables from the circuit board with the aux port. Can I buy a new circuit board with the charge port and aux port already on it?
What glue do you use to passive bass
This device is the most difficult device to dissemble which i have ever seen. Shame on you jbl. Really they made as use and throw.
how much is the replacement battery cost pls? mabe it's not worthy to fiddle and is better to buy a new speaker?
en donde pueden aser eso, alguien puede decirme
Well that's a better way to do it. I tried doing it on my own and pretty much disassembled it completely then something didn't feel right so I went on RUclips and we'll. I regret wasting time haha
Hey, Im trying to connect the charging port directly to the speaker, to avoid the change of battery. I only use it on my room anyways.
Do you have any idea of how to do it?
@@josegabrielblockstaackmann5354 try swapping the connectors just make sure you plug the good ones in and leave the ones for headphone jack out
@@adrianrylski8794 should I include a voltage regulator?
@@joseblock7490 if your source is stable (good pc or known good charger that won't be necessary, just make sure you're powering it from something decent and you will be fine) then you don't need voltage regulation. my best bet for you would be a powerbank as they physically don't output more than 5v. Also i ripped my battery apart by mistake and positive and negative wires go to one terminal (2 red wires go to one positive terminal and 2 black go to one negative) which I think meant you don't have to have both wires populated for the thing to run
Where do you buy the battery?
I found the battery on Amazon:
amzn.to/3htmlmX
Thank you