When I paint something with engine paint after it dries, I put it in front of a ceramic space heater and cook the high temp engine paint on. I thought he would paint the phosphated hinges. This phosphate finish is sometimes done on firearms. Which reminds me, there is a baked on firearm finish called ceracote that would be great for this. It holds up very well and the good thing is that it is a very thin finish so it won't effect the function of the hinges.
Great video! I just finished the hood hinges on my 67 Mustang and they look great. I painted my springs black though. I do have a question. . What do I do with the Zinc phosphate now that I’m done with it?
Zinc Phosphate can be used for more than one application. Before you let it go make certain none of your friends don't have a need also, Most U.S. counties have a hazardous waste disposal site, where they take in and recycle Zinc Phosphate solutions without charge.
Classic Car Restoration Club I have asked my friends that play around with old cars and none of them seem to want it. Now I have diluted gallons of it and don’t know what to do with it. I am currently working ( restoring ) a VW bug and can’t think of anything that would work with it.
Probably a silly question, but are the iamb I imagine hood springs are way too strong to use any kind of spring clamps like the kind you use when you do brakes or am I on the right track as far as using that type of tool? Yes, I am just thinking like if you were going to do a lot of classic car hood not just a one off. Lol.
Great question! The ‘Ask an Expert’ section is currently for members of our online community. By becoming a member, you will have access to our expert knowledge. With your membership you will also receive discounts on products and hundreds of hours of Premium content. If you are interested in becoming a member, please click on the offer below: go.ClassicCarRestorationClub.com/C53253 Thanks!
Hello Lenny, This is one process you'll need a sandblaster for. Small blasters you can use outside are inexpensive and will get the job done. Or consider having them blasted at a local restoration shop or dedicated media blaster. I use glass bead for blasting hood hinges as it's not too aggressive. More than rust removal, the blasting builds a little tooth to the surface to accept the Phosphate coating. Wrench Safe, MarkClassic Car Restoration Club Video Membership
Hello Trinidad, I suspect you are referring to the studs that mount the hinges to the car. These are factory pressed in studs, I tried to locate a source for you but came up empty so far. Bolts could be welded in place, but I would start by trying to locate a commercial source. Hope this helps! Mark Classic Car Restoration Club Video Membership
Maybe some one on this site can Help- I have a 1948 Pontiac- it has a crossbar/ bracket that goes underneath the hood- It is rivets to the hood hinges. Problem is on a long drive the hood flew up-and bent a bracket attached by the spring and also stretched the "rivets". I can get the bracket fixed but no one will touch it because they have to drill out the rivets and we can't find rivets. The crossbar is crucial to the hood so replacing the hinges aren't an option- Anyone know a link to the whole assembly ( maybe parting out a pontiac) or the rivets- The body is a B style--- the same as a 1946
Hi Jeff, I have seen few projects that any Quality Restoration shop will not take on, including replacing hood rivets. With that said perhaps you haven't asked the right people yet? There are still 1946, 47, 48 Pontiacs in vintage salvage yards even a quick search of Desert Valley Auto Parts revealed a handful of them for sale most with hoods still intact. There may even be one closer to home at a vintage salvage yard near you. Aircraft Tool Supply (ATS) (aircraft-tool.com/shop/search.aspx?CATEGORY=Rivets) also sells a wide variety of Rivets and Rivet guns. Check out this video where Bob Wilson owner of RJ Restoration demonstrates how to install rivets using an ATS Rivet gun; www.classiccarrestorationclub.com/video/how-to-install-rivets-011466/ Mark Classic Car Restoration Club
@@ClassicCarRestorationClub - Good answer and it's clear I haven't asked the right people- I just thought a classic car club would have at least 1 person who had run into this problem- or would at least have a lead.---- My bad
@@rowlandhall4108 Yes thanks for asking- as a matter of fact-- while everyone was telling me to send an irreplaceable part across country- I found a great craftsman here that fabricates and builds- that was able to machine the rivet so well even the painter wasn't sure which one was made. problem now is getting the hood springs back on.. instead of being compressed they have to be stretched/expanded about 11/2"-2" and no the trick of using washers don't work... I'm not a welder so the youtube video isn't of any use to me... They make a spring compressor but not a spring expander. If it was only a 1/2" no problem..
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
That finished result looks spectacular
Great information. Thanks.
My wife says when you put on safety glasses, you look like Dale Earnhart😎
Awesome tip on tightening the rivets
I was hoping this would show more in depth repair for replacing rivets and repairing wallowed out holes.
There is far more to restoring hood hinges than is shown in this video.
@@rowlandhall4108 I know, that's why my comment.
When I paint something with engine paint after it dries, I put it in front of a ceramic space heater and cook the high temp engine paint on. I thought he would paint the phosphated hinges. This phosphate finish is sometimes done on firearms. Which reminds me, there is a baked on firearm finish called ceracote that would be great for this. It holds up very well and the good thing is that it is a very thin finish so it won't effect the function of the hinges.
Great video. Thanks!
Nicely Done
Heisenberg...nice job
Great video! I just finished the hood hinges on my 67 Mustang and they look great. I painted my springs black though. I do have a question. . What do I do with the Zinc phosphate now that I’m done with it?
Zinc Phosphate can be used for more than one application.
Before you let it go make certain none of your friends don't have a need also,
Most U.S. counties have a hazardous waste disposal site, where they take in and recycle Zinc Phosphate solutions without charge.
Classic Car Restoration Club I have asked my friends that play around with old cars and none of them seem to want it. Now I have diluted gallons of it and don’t know what to do with it. I am currently working ( restoring ) a VW bug and can’t think of anything that would work with it.
Good Demo.
This reminds me of a cooking show but for men
Probably a silly question, but are the iamb I imagine hood springs are way too strong to use any kind of spring clamps like the kind you use when you do brakes or am I on the right track as far as using that type of tool? Yes, I am just thinking like if you were going to do a lot of classic car hood not just a one off. Lol.
Great question! The ‘Ask an Expert’ section is currently for members of our online community. By becoming a member, you will have access to our expert knowledge. With your membership you will also receive discounts on products and hundreds of hours of Premium content.
If you are interested in becoming a member, please click on the offer below:
go.ClassicCarRestorationClub.com/C53253
Thanks!
Why didn't you zinc phosphate the springs? Only primer???
i want to sand blast mine, but i dont have access to a sand blaster , would you recomend to use electrolysis as amethod to get rid of rust? be well
Hello Lenny,
This is one process you'll need a sandblaster for.
Small blasters you can use outside are inexpensive and will get the job done.
Or consider having them blasted at a local restoration shop or dedicated media blaster.
I use glass bead for blasting hood hinges as it's not too aggressive.
More than rust removal, the blasting builds a little tooth to the surface to accept the Phosphate coating.
Wrench Safe,
MarkClassic Car Restoration Club Video Membership
You will not pull the springs off by hand on a 60 Chrysler, never mind an Imperial. He piked a hinge with really light springs.
What are those bolts on the hoodhinges called
Hello Trinidad,
I suspect you are referring to the studs that mount the hinges to the car.
These are factory pressed in studs, I tried to locate a source for you but came up empty so far.
Bolts could be welded in place, but I would start by trying to locate a commercial source.
Hope this helps!
Mark
Classic Car Restoration Club Video Membership
Maybe some one on this site can Help- I have a 1948 Pontiac- it has a crossbar/ bracket that goes underneath the hood- It is rivets to the hood hinges. Problem is on a long drive the hood flew up-and bent a bracket attached by the spring and also stretched the "rivets". I can get the bracket fixed but no one will touch it because they have to drill out the rivets and we can't find rivets. The crossbar is crucial to the hood so replacing the hinges aren't an option- Anyone know a link to the whole assembly ( maybe parting out a pontiac) or the rivets- The body is a B style--- the same as a 1946
Hi Jeff,
I have seen few projects that any Quality Restoration shop will not take on, including replacing hood rivets.
With that said perhaps you haven't asked the right people yet?
There are still 1946, 47, 48 Pontiacs in vintage salvage yards even a quick search of Desert Valley Auto Parts revealed a handful of them for sale most with hoods still intact.
There may even be one closer to home at a vintage salvage yard near you.
Aircraft Tool Supply (ATS) (aircraft-tool.com/shop/search.aspx?CATEGORY=Rivets) also sells a wide variety of Rivets and Rivet guns.
Check out this video where Bob Wilson owner of RJ Restoration demonstrates how to install rivets using an ATS Rivet gun; www.classiccarrestorationclub.com/video/how-to-install-rivets-011466/
Mark
Classic Car Restoration Club
@@ClassicCarRestorationClub - Good answer and it's clear I haven't asked the right people- I just thought a classic car club would have at least 1 person who had run into this problem- or would at least have a lead.---- My bad
Jeff, did you get your hinge fixed?
@@rowlandhall4108 Yes thanks for asking- as a matter of fact-- while everyone was telling me to send an irreplaceable part across country- I found a great craftsman here that fabricates and builds- that was able to machine the rivet so well even the painter wasn't sure which one was made. problem now is getting the hood springs back on.. instead of being compressed they have to be stretched/expanded about 11/2"-2" and no the trick of using washers don't work... I'm not a welder so the youtube video isn't of any use to me... They make a spring compressor but not a spring expander. If it was only a 1/2" no problem..
so not so much a rebuild as a refinish. you should change the title, it is misleading. is a good vid on phosphate coating though
Thank you for the feedback!