This video shows instructions on how to splice into the existing wire that goes to that switch for the door. On the 2018 Honda Accord the door switch is no longer there. Does anyone know where that switch is located now or how the door lighting works when the door opens and closes? I need to know which color wires I should be using for this kit. Thank you.
Hello.We got another video for Audi which it it running the wire from the foot light.You can check this for reference.I hope that could help you .ruclips.net/video/5fGqN_oKwgA/видео.html
Hello - I just got my lights and want to install. I have a 2010 Mercedes’ e350 (w212). I don’t want to have to run the wires through to the door light. Is there an easier way? What specific wire can I tap into? I have 4 door sills so I would need 4 separate wires to tap into. Thanks
Hello, the red wire in the video is just a regular power wire. We demonstrated how to use a circuit tester pen to find the correct power wire. To locate the power wire that controls the car door switch or the courtesy light, you will need to repeat the testing process. For more detailed steps on finding the correct power wire, you can refer to this video ruclips.net/video/9WPTfcFoXTs/видео.html. Each car may have different configurations, so we hope you can find your way. Thank you for your attention😄.
Los mios dejaron de funcionar ambos al mismo tiempo, me da la impresion que el problema puede ser un fusible que ya no funcione, alguien podria decirme que fusible es el que alimenta de corriente estas piezas por favor
AoonuAuto thank you for the reply but you did not answer my question. The technique shown in the video, is that the same installation for a Maxima VIII(a36) vehicle?
@@sandroace Oh I am sorry that I got misunderstand. Actually, our led door sill can install the same way as this video. But different cars will be a little bit different to wire. You can check our channel for more install instruction videos so that you will understand what's different.ruclips.net/p/PLFi5rKEiA18r1kOU37BtcZHX4X9AWah3d
Winds Requiem I have not received them yet. I bought them on AliExpress. I can say however that it appears that the installation is the same as in this video. Once I receive them(should be soon) I’ll reply an update if I got them installed successfully.
Hola, los cables existentes es donde se genera la energía para los umbrales de las puertas, puede conectar los cables del umbral de la puerta con los cables existentes para permitir que el umbral de la puerta obtenga su potencia.
![How To Install Dynamic LED Door Sill [Step By Step Installation Guide]](http://i.ytimg.com/vi/J4Vw-J6ok9k/mqdefault.jpg)
![How To Install Dynamic LED Door Sill [Step By Step Installation Guide]](/img/tr.png)
Conecte como está ahí pero la intensidad de la luz no es tan fuerte alguna sugerencia ?
Any special reason to connect with white blue wire????
This video shows instructions on how to splice into the existing wire that goes to that switch for the door. On the 2018 Honda Accord the door switch is no longer there. Does anyone know where that switch is located now or how the door lighting works when the door opens and closes? I need to know which color wires I should be using for this kit. Thank you.
Hello.We got another video for Audi which it it running the wire from the foot light.You can check this for reference.I hope that could help you .ruclips.net/video/5fGqN_oKwgA/видео.html
how do you get scratches off from it?
Is this a single wire that goes to the switch ? Trying to do this on my 2018 camry
Super sir
Hello - I just got my lights and want to install. I have a 2010 Mercedes’ e350 (w212). I don’t want to have to run the wires through to the door light. Is there an easier way? What specific wire can I tap into? I have 4 door sills so I would need 4 separate wires to tap into. Thanks
what is the red wire?
Hello, the red wire in the video is just a regular power wire. We demonstrated how to use a circuit tester pen to find the correct power wire. To locate the power wire that controls the car door switch or the courtesy light, you will need to repeat the testing process. For more detailed steps on finding the correct power wire, you can refer to this video ruclips.net/video/9WPTfcFoXTs/видео.html. Each car may have different configurations, so we hope you can find your way. Thank you for your attention😄.
I did order. How do I connect the wires on my Acura 2004 TSX. Thank.
Did you figure it out? i am getting mine today for a 2008 TSX lol
0⁰
I just received my lights today for my 2008 Saab But I didn’t know it needed to be installed I thought it was just the stick ons
I am sorry to make you confused.We also have another model that no need to install .They can use battery.
Los mios dejaron de funcionar ambos al mismo tiempo, me da la impresion que el problema puede ser un fusible que ya no funcione, alguien podria decirme que fusible es el que alimenta de corriente estas piezas por favor
Will this technique apply to a 2016 Nissan Maxima?
Hello we can produce for any kind of car.If you want to know detail information please click into our site to check.aoonuauto.com/
AoonuAuto thank you for the reply but you did not answer my question. The technique shown in the video, is that the same installation for a Maxima VIII(a36) vehicle?
@@sandroace Oh I am sorry that I got misunderstand. Actually, our led door sill can install the same way as this video. But different cars will be a little bit different to wire. You can check our channel for more install instruction videos so that you will understand what's different.ruclips.net/p/PLFi5rKEiA18r1kOU37BtcZHX4X9AWah3d
@@sandroace did you ever find a way to install them? Still trying to get them on my 17 maxima
Winds Requiem I have not received them yet. I bought them on AliExpress. I can say however that it appears that the installation is the same as in this video. Once I receive them(should be soon) I’ll reply an update if I got them installed successfully.
Do you guys have a more detailed version of this video?
Hello You can click into our channel to check detail.
नयी गाडी मे लगवाया जा सकता है,वरेन्टी लैस तो नही होगी?
no logro encontrar corriente..... lo que si encontre fue el cable de cada punto de las puertas
Hola, los cables existentes es donde se genera la energía para los umbrales de las puertas, puede conectar los cables del umbral de la puerta con los cables existentes para permitir que el umbral de la puerta obtenga su potencia.
better buy a car with all the blows and whistles instead of tinkering with electricals of a product costing millions.
Conecte como está ahí pero la intensidad de la luz no es tan fuerte alguna sugerencia ?
Conecte como está ahí pero la intensidad de la luz no es tan fuerte alguna sugerencia ?
Conecte como está ahí pero la intensidad de la luz no es tan fuerte alguna sugerencia ?
Conecte como está ahí pero la intensidad de la luz no es tan fuerte alguna sugerencia ?