How To Install Dynamic LED Door Sill [Step By Step Installation Guide]

Поделиться
HTML-код
  • Опубликовано: 7 сен 2024
  • Welcome back everyone! Today I will show you how to install dynamic LED Door sill to protect from scratch while adding some flair with dynamic lighting. Led door sill will be the first thing your passengers will see as they enter your vehicle. Here is an install on a 2019 Honda Pilot.
    Subscribe for more: / @autosensation
    Would you rather have it dynamic or static?
    Comment below let me know what you think.
    Tools needed:
    Trim pry tool or flathead screwdriver
    Automotive wire
    Electrical tape
    Rubbing Alcohol
    Install time:
    About 4 - 5 hours
    Difficulty level:
    Intermediate - Hard
    Affiliated Product links:
    👉Dynamic LED Door Sill
    Amazon: amzn.to/3VSYCiL
    Ebay: ebay.us/KSe2vX
    👉Automotive wire
    Amazon: amzn.to/3uEiVUa
    Ebay: ebay.us/ygdnHu
    👉Auxito Automotive LED Lighting - auxito.com/?re...
    Auxito Copon Code 15%OFF Use AUTOSENSATION
    👉Akeeyo Dashcam - www.akeeyo.com...
    🏪🚨Our Amazon StoreFront (Most of the products we use in our videos)🏪🚨
    www.amazon.com...
    👕👗Our Merch👕👗
    www.redbubble.c...
    Check out more videos!
    - My latest video: • Latest Videos | Auto S...
    - Most Popular Video: • Most Popular | Auto Se...
    - Subscribe for more: / @autosensation
    Don't forget to like and subscribe so you don't miss out on our future videos. The more subscribers we get the better and more content on other vehicles we can continue creating. Subscribe. Subscribe. Subscribe.
    Disclaimer: This channel is created for informational and entertainment purpose. I am not a mechanic or an electrical mechanic. Auto Sensation or myself will not be held responsible for any damages, injuries, losses or liabilities associated with anything you did to your vehicle/property whatsoever. Please follow your manufacturers guidelines and information in this channel is at your own risk. Note: Some of the links provided are affiliate links in which I may earn a small commision if products are purchased through those links at not additional cost to you. Thank for supporting our channel.
    Music Credit
    Sunbathers by Scandinavianz / scandinavianz
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    #autosensation

Комментарии • 81

  • @noneedfornames24-7
    @noneedfornames24-7 Год назад +3

    Now they have the exact same lights plus more modes and it’s all magnets w/wireless control thru your phone. Glad I waited

  • @stephencannon3140
    @stephencannon3140 Год назад +2

    Call it old school but I still maintain ops check the installation BEFORE final fitment. Place a piece of painters or masking tape to hold the placement while the wiring is done. The 3M adhesive sticky tape should be removed LAST then press the sill plate to the door sill and press down firmly.
    Aside from that great video and thanks. Getting ready to tackle the project soon. Although the vehicle will be different the concept and procedures should be the same.

  • @pickeyism
    @pickeyism 2 года назад +1

    Man, you murdered your Pilot from top down, side to side. 😂. I will this mod to my 2022. Thanks for sharing!

  • @jasonphan6469
    @jasonphan6469 2 года назад +1

    That surprise quarter was hilarious lol

  • @AutoSensation
    @AutoSensation  Год назад

    👉Dynamic LED Door Sill
    Amazon: amzn.to/3VSYCiL

  • @strongislandautoenthusiast841
    @strongislandautoenthusiast841 Год назад

    They look dope at night my dude!!

  • @Brooklynraised68
    @Brooklynraised68 2 года назад +2

    I prefer steady lights more but they look good

  • @jaimearteaga8551
    @jaimearteaga8551 3 года назад +1

    Thank you for this awesome Tutorial I have installed it as well on my 2019 Pilot EX_L they look amazing

  • @zinaugustin
    @zinaugustin 2 месяца назад +1

    This looks really nice. How can I get the same dynamic illuminated door sills?

    • @AutoSensation
      @AutoSensation  2 месяца назад

      I got these awhile ago. it looks like manufacturers moved to wireless charged via usb. amzn.to/3VSYCiL

  • @erichernandez9751
    @erichernandez9751 3 месяца назад +1

    Can you just tap them to the door sensor, so when you open the door they turn on and when you close it they turn off? Don't they all turn onn even when only one door is open?

    • @AutoSensation
      @AutoSensation  3 месяца назад

      I'm pretty sure you can tap into the door.

  • @IamHeemsah
    @IamHeemsah Год назад +1

    Mine came with USB charging cords…so how long are they charging for? And mine were lighting up just separating the strips out of the packing. And there are NO instructions with mine

  • @ephsjennifer
    @ephsjennifer Год назад +1

    How do you know when it’s done charging with USB?

  • @asagoodfriend
    @asagoodfriend 10 месяцев назад +1

    Great Video man!👍

  • @barnaveinc.1895
    @barnaveinc.1895 Год назад +1

    your my guy

  • @DrLaFuria
    @DrLaFuria Год назад +2

    Do they make these without having to do all the wiring? Just wondering 🤔

  • @andrewrandolph9559
    @andrewrandolph9559 Год назад +2

    U SHOULD OF GOT CLOSER TO THE RUBBER SO U DONT SEE THE WIRES ANY WAY NICE JOB

    • @AutoSensation
      @AutoSensation  Год назад

      Yeah. After it was done I did realize I should have done that. But no biggie

  • @jemerbautista
    @jemerbautista 2 года назад +1

    Awesome and detailed install, would i be able to tap my underglows to those so it can act as a door/welcome light?

    • @AutoSensation
      @AutoSensation  2 года назад

      Yes. That's how I have my underglows connected. I also added a switch in case I want to turn it on without the doors being opened or when the car is off.

  • @joevaniepangcobila7945
    @joevaniepangcobila7945 Год назад +1

    Very cool. Good video.

  • @xin.0929
    @xin.0929 8 месяцев назад +1

    Hello, can I use the 6pin socket instead of the 3pin one as the power supply if my plug is 3pin?

    • @AutoSensation
      @AutoSensation  8 месяцев назад

      Yes. Just connect to two wires. power and ground

  • @AutoSensation
    @AutoSensation  3 года назад

    Product link on the description.

  • @Wilyb153
    @Wilyb153 3 года назад +1

    good work my dude

  • @jarosawszymczyk1267
    @jarosawszymczyk1267 Год назад +1

    Do you manufacture and sell such lighting or is it just an assembly demonstration?

    • @AutoSensation
      @AutoSensation  Год назад

      No. I'm not a seller or manufacturer. I just create videos as I install them on my cars.

  • @jasonlee1008
    @jasonlee1008 3 года назад +2

    Is there a setting where they just stay lit constantly and not wave?

    • @AutoSensation
      @AutoSensation  3 года назад

      Unfortunately no. If you want the static light the OEM ones just stay lit.

    • @truhunk1
      @truhunk1 3 года назад +1

      Right, not crazy about that disco look.

  • @donttryjustdonoexcuses9029
    @donttryjustdonoexcuses9029 2 года назад +1

    Hey thanks for the vid. I have a 2011 buick regal. Do every car have the 2pin plug ins?

  • @SENGVIN
    @SENGVIN 2 года назад

    Are those oem ? Coz it's hard to believe honda would have you do it like that splicing wires and shit.

  • @JuanBorja-we2so
    @JuanBorja-we2so Год назад +1

    Can you put the light on steady mode?

  • @renorican1
    @renorican1 3 года назад +1

    Great video!

  • @charlie-martinnadon6787
    @charlie-martinnadon6787 2 года назад +1

    Amazon link does not work anymore. Any way to get same order as you did in Blue? Looks awesome!

  • @jemerbautista
    @jemerbautista 2 года назад +1

    by any chance you know the color of the positive and negative just blow the glove box? =D

    • @AutoSensation
      @AutoSensation  2 года назад +1

      Sorry. I don't know of the top of my head.

    • @jemerbautista
      @jemerbautista 2 года назад

      @@AutoSensation no problem thank you =D

  • @AutoSensation
    @AutoSensation  3 года назад

    More content here. bit.ly/3rmhnvL

  • @BARUCH6223
    @BARUCH6223 2 года назад +1

    Nice 👍🏾

  • @deldeek
    @deldeek 2 года назад +1

    The harnesses that you tapped into , are these just sitting there for you to use for any accessories? Like were they factory installed and readily avail to freely tap into ?
    Reason I ask I have a 2009 Armada LE was wondering if it’s the same kinda deal on finding these harnesses to tap into ! Thanks for the clarification

    • @AutoSensation
      @AutoSensation  2 года назад +1

      Yes. This harness was readily available. I can't speak for the Armada but in the Pilot it is.

    • @deldeek
      @deldeek 2 года назад +1

      @@AutoSensation ok thanks you , could you source the Amazon seller from which you ordered yours ? Thank you

    • @AutoSensation
      @AutoSensation  2 года назад

      Can't seem to find the seller. I search again tomorrow and let you know

  • @hd-0f385
    @hd-0f385 2 года назад +1

    where can i get the led door sill for the honda pilot 2016

  • @lukeguerrero02
    @lukeguerrero02 3 года назад +1

    Sick

  • @avieneronisemuli849
    @avieneronisemuli849 3 года назад +1

    do they stay on all the time or they turn off when you shut the door?

    • @AutoSensation
      @AutoSensation  3 года назад +1

      They shut off when the door is shut.

    • @avieneronisemuli849
      @avieneronisemuli849 3 года назад

      @@AutoSensation , i have a 2016 touring. I assume my pilot has those two pin harness?!

    • @AutoSensation
      @AutoSensation  3 года назад +1

      @@avieneronisemuli849 Yes. I believe they do because the have the OEM illuminated door sills for that year and trim level.

    • @avieneronisemuli849
      @avieneronisemuli849 3 года назад

      i appreciate your help! more power to you bro!

    • @AutoSensation
      @AutoSensation  3 года назад

      @@avieneronisemuli849 Anytime. Good luck on your install.

  • @niklay33
    @niklay33 2 года назад +1

    Nice look but not so easy install👍

    • @AutoSensation
      @AutoSensation  2 года назад

      The hardest part was the wiring. Pulling out the panels and placing them back was easy. Squeezing your hand in tight places to get the the wire was hard.

  • @keemingchang1060
    @keemingchang1060 3 года назад +1

    Your led light is sold there

  • @Chriswane0523
    @Chriswane0523 3 года назад

    I dont really understand your guideline bro. You need to show it by step by step how you wiring it.😔😓😪

  • @irietropicals4255
    @irietropicals4255 3 года назад +4

    A lot of work for some lights lol

    • @masterb2966
      @masterb2966 Год назад

      dude took apart the whole car

    • @ELBENDC2
      @ELBENDC2 Год назад

      I know wow, he doesn't know they sell the rechargeable ones now, plus you have more color and options with the light

  • @f5fstop
    @f5fstop Год назад

    Looking cool is very subjective. Looks like crap to me.

  • @gramz47
    @gramz47 2 года назад

    Why do people instal their sills to wear it doesn’t even protect the edge🤦‍♂️ so dumb

  • @Ceszilla
    @Ceszilla 3 года назад

    Dude, just shave your head

  • @jahzicarino992
    @jahzicarino992 Год назад +1

    Phenomenal work !🤌🏽