Can anyone help going to fit my dm selector today but don’t get the part in video where the guy puts ruler across body of selector box then turns the bit on arm the opposite way,is there a right and wrong position for this part ? Thanks
That makes sense 🙌 The ones that are not,are they a manufacturing defect ? I’ve got it on now,but the box isn’t resetting all the time when I change gear,I have to twist back to select gear,is it possible one or both cables are a bit tight,as it worked ok before I installed it 🙌
Tenho uma vespa cosa 125c tenho um problema no sistema de travões. Já lhe montei tubos novos e bomba nova e não consigo meter a travar . existe algum truque.
@@FreakMoPed8, José have some issues in brake system, he cant put the vespa cosa 125 braking well even with new tubes and brake pump. Is there any trick? Cheers
I bought one, and I have just installed it on my px200, 1-2-3-4 gear are ok, but I can not turn into N gear, only 4 positions. If remove the gear box and rotate the handle, there are 5 positions normaly. Can you help me?
@@FreakMoPed8 so it means that the "PX old" version can be fitted on a '78 Vespa Super VBC. Do I need to do any "dirty work" or modifications or just plug and play?
My brother wanted to do this to his PX200 but because of the stupid mayor of London he now has to sell it. From April 2019 he won't be allowed to use it to go to work 😤
2006? There are probably more than a 1000 of pre 2006 vehicles riding on the road in just in bangalore. Even my granddad's vespa 150 and jawa 250 type 353 are totally road legal and are allowed to ride on the road in India!!
Hi sir. Can you please tell me why th grees is applied on jenkit instead of silicon tube. Regards Baber
?
Dear sir when i hold the clutch i get sound from the engine is that a baring or clutch plates or pressure plate or clutch box fault
that gear change looks very precise and positive were do you get one thanks
www.motorino-diavolo.de/
Or sip
@@FreakMoPed8 thanks for the link all the best to you
BTW, is there any changes appear on the left side of the handle bar 1234 when in running mode? Please advise. Kind regards.
u just click up and down
Can anyone help going to fit my dm selector today but don’t get the part in video where the guy puts ruler across body of selector box then turns the bit on arm the opposite way,is there a right and wrong position for this part ?
Thanks
Which min of the vid
3min 4sec
it should be exactly the same on both sides, thats just the check if it is like that. Some selectors are not.
That makes sense 🙌
The ones that are not,are they a manufacturing defect ?
I’ve got it on now,but the box isn’t resetting all the time when I change gear,I have to twist back to select gear,is it possible one or both cables are a bit tight,as it worked ok before I installed it 🙌
But... can i fit it on my VBA with lml reed valve engine ? I am ont sure the kit exists.
Tenho uma vespa cosa 125c tenho um problema no sistema de travões. Já lhe montei tubos novos e bomba nova e não consigo meter a travar . existe algum truque.
english pls
@@FreakMoPed8, José have some issues in brake system, he cant put the vespa cosa 125 braking well even with new tubes and brake pump.
Is there any trick? Cheers
Can you fit a normal selector box cover or does it need a special one?
normal fits
@@FreakMoPed8 brilliant thank you 😁
I bought one, and I have just installed it on my px200, 1-2-3-4 gear are ok, but I can not turn into N gear, only 4 positions. If remove the gear box and rotate the handle, there are 5 positions normaly. Can you help me?
Did u try it without cables in your hand? Put a wire in as i did in thr videos and see if there are all positions
can i change transmission from original 1n234 to transmision like motorcycle? just up and down left handle?
ruclips.net/video/phkXFL_RR18/видео.html
@@FreakMoPed8 awsm tnks🤞
Would these fit a PX with a kit fitted? also what sort of price would one of cost to be fitted? Regards Alan
See sip shop or their homepage
Why do you scratch the surface?
what do you mean?
@@FreakMoPed8 edge of the gear changer before putting grease and gasket.
you mean the rasp, its rounding the edge, to ensure that its tight when mounted. same you should do with the engine half sealing surface edges
Thank you for the excellent information.
Can it be fitted on a Vespa Super?
yes its also available for px old gearbox
www.motorino-diavolo.de/PRODUKTE/PREISE/MD-N-1-01/02/
@@FreakMoPed8 so it means that the "PX old" version can be fitted on a '78 Vespa Super VBC. Do I need to do any "dirty work" or modifications or just plug and play?
pls contact motorino directly.
Can i get this one?
yes. available via sip
Is it fit for my PX vespa sir...??
yes
Your video very thankful
Perfect.
My brother wanted to do this to his PX200 but because of the stupid mayor of London he now has to sell it. From April 2019 he won't be allowed to use it to go to work 😤
oh. what. no two stroke allowed anymore???!?
mista FreakMoPed
Nope nor any other mopeds/scooters or motorbikes from before 2006.
Stupid mayor
2006? There are probably more than a 1000 of pre 2006 vehicles riding on the road in just in bangalore. Even my granddad's vespa 150 and jawa 250 type 353 are totally road legal and are allowed to ride on the road in India!!
too bad, and it's working is mouth watering lol