Thanks for this video. It was very helpful. First time actually seeing the break down of how to set the parameters for this toolpath. I'd like to see more Multiaxis parameter breakdowns like this one.
This Mastercam guy is my hero on and I am always extreemly impress with way of thinking and also his personality fits in well with these teachings. Again well done 👍
How do you go about setting up the frames, (x,y,z) so the cutter can "see" the surfaces? Or do you just need one work offset and Mastercam does frames automatically? Thanks!
Blade Expert does all the heavy lifting for you, it can create the planes it needs on its own. To do this part outside of Blade Expert, yes there would be some plane creation and/or toolpath transformations to be done.
Blade Expert does require a 5 axis machine. I do not believe you can force it to output only 4. To get the full use out of an addin like this, you would want to be using a 5x machine. The toolpath itself must be purchased separately in the full version of Mastercam. But it is available in the HLE version so you can see how it works.
Thanks for this video. It was very helpful. First time actually seeing the break down of how to set the parameters for this toolpath. I'd like to see more Multiaxis parameter breakdowns like this one.
This Mastercam guy is my hero on and I am always extreemly impress with way of thinking and also his personality fits in well with these teachings. Again well done 👍
Wow, thank you!
@@CamInstructor ลลลชงล
Thanks for the great vid, can we all mastercam users ask for more videos of multi axis ops please.
Lots of multi axis stuff on the way!
@@CamInstructor does this work on other machines too?
does mastercam have a good post for DMG machines or mazak integrexes ?
Ayuda, me sale " exception raised calculation routine" (could not shroud contour) ?????
Tough to guess at the error without seeing the file.
Hey, please show to setup the vice in 5 axis machining and how to setup stock.
Planning on it soon. Thanks!
more videos like this for sure!
How do you go about setting up the frames, (x,y,z) so the cutter can "see" the surfaces? Or do you just need one work offset and Mastercam does frames automatically? Thanks!
Blade Expert does all the heavy lifting for you, it can create the planes it needs on its own. To do this part outside of Blade Expert, yes there would be some plane creation and/or toolpath transformations to be done.
IS THIS POSSIBLE TO LOCK ONE AXIS FOR ALL THESE OPERATION.4.1 AXIS INSTEAD 5 AXIS.
THANKS
Good
Thanks
Do blade expert will be able for 4 axis Sir?
Blade Expert does require a 5 axis machine. I do not believe you can force it to output only 4. To get the full use out of an addin like this, you would want to be using a 5x machine.
The toolpath itself must be purchased separately in the full version of Mastercam. But it is available in the HLE version so you can see how it works.
What size is a typical blade program?
As in lines of code or something else?
@@CamInstructor lines of code or KBs
where ca i get this step file?
If you have a Mastercam license you can find a similar file in the Tech Exchange. Grabcad also had a lot of different impellers you can download.
Could u post the step file
I'll have to dig through the archives to try and find it.
Ia this option toolpath?
Yes it is a tool path in Mastercam.