Thank you for being so patient and clear with your instructions. This procedure doesn't sound difficult but so many details to keep up with. You made me feel much more comfortable attempting this. Great video!
Good morning ☕️ we are truly honored to get this message from you, thank you. The DIY community is the best, and we do our absolute best to get the community the info they need without wasting their valuable time. We hope your DIY boat projects are going well, let us know if we can help answer any questions. Enjoy your weekend. 😁👍🧰
@@markvollmar-ks4fg We appreciate that, thank you. We don’t have a video on that at the moment however, it is on the list. Looking forward to hearing back from you, let us know if you have any questions. 😁👍🧰
Excellent job describing things and showing how it all works. My boat drive is stuck in the up position and will not tilt/trim down. When I push the up and down buttons on the throttle arm, I can hear the sound and it sounds exactly like it does when it is actually moving/working properly, however, there is no movement of the outdrive. It is not going up or down, yet it sounds like it always does when working right. Does that mean my solenoids are good and I have some other issue? Any ideas? Thank you in advance!
@@robeggett9946 Thanks for watching, any update? It may be that there is air in the lines or a Trim switch on outdrive has malfunctioned. We would focus first on the solenoid and replace both. Keep us posted.
Do you know where the 2nd red fuse lead wire is connected to - the one you didn't remove? I have not only a blown fuse, but a totally mangled fuse holder and was thinking of rewiring it into its original location rather than splice the wires and installing a new fuse holder. My access is pretty tight though so the splicing isn't the worst option.
@@brian48026 Thanks for watching, any update? Are you referring to the part shown in link below? www.ebay.com/itm/313685943865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lvVhobzhTp-&sssrc=4429486&ssuid=9oPkoM_JR36&var=&widget_ver=artemis&media=COPY 🧰
@@DIYwithMichaelBorders Not yet, haven't had a chance to get back to my boat yet. I have an extremely tight fit with difficult visibility where its located on my Amberjack. Looking at this video, it seems to just be connected to one of the posts on the back side of the top solenoid. ruclips.net/video/9Zn2bZ1MuJ8/видео.html
@@brian48026 Thanks for the reply. In our case, the red wire has a bluish purple stripe and feeds out of the fuse casing and travels behind the upper Trim Solenoid and into the larger rubber housing.
@@jmed4915 Thanks for watching. It’s either a 20amp or 25amp depending on the hydraulic pump and motor assembly model. Our fuse is a 25amp. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. OEM Fuse: amzn.to/4fKMifv 😎👍🧰
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: ruclips.net/p/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS&si=0QF9J0YNrNOKii3a
************
1. Distributor Tune-up Kit: amzn.to/3RW1Mn5
2. Mercruiser 3.0L Distributor Cap: amzn.to/3veD5th
3. Trim Solenoid (Purchase two): amzn.to/47fs6wM
4. Ratcheting ranch set: amzn.to/48wswQz
5. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
6. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
7. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
8. Quicksilver grease gun: amzn.to/3uOFgDG
9. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
10. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
11. Trim Ram plastic caps: amzn.to/3NlBV5b
12. Extreme Grease: amzn.to/46TgwY4
13. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. Install your outdrive to boat transom
ruclips.net/video/HgMSGiSiBA4/видео.html
2. Replace Mercruiser outdrive Bellows/Shift Cable/Water Tube (PART 1)
ruclips.net/video/NcObTOYXtQM/видео.html
3. Mercruiser outdrive Upper unit rebuild (PART 1)
ruclips.net/video/i7nRJPbRYPI/видео.html
4. Mercruiser outdrive Lower unit rebuild (PART 1)
ruclips.net/video/ehTA4BRH4t8/видео.html
5. How to calibrate/adjust Trim Limit and Sender switches
ruclips.net/video/5BetZVkPPHI/видео.html
6. Replace Trim Limit and Sender Switches
ruclips.net/video/vjJDnmJCNL4/видео.html
7. How to replace Trim Rams and Hoses
ruclips.net/video/nkcFYl5bL7c/видео.html
8. How to Air-Bleed your hydraulic Trim Rams and Hoses/lines
ruclips.net/video/gfW3dWsSLkE/видео.html
9. Replace Anode kit
ruclips.net/video/qy_qclP3zUQ/видео.html
10. How to replace outdrive Anode Kit
ruclips.net/video/qy_qclP3zUQ/видео.html
11. How to grease your outdrive grease fittings
ruclips.net/video/7q1sBu0TsPw/видео.html
👍😎
Thank you for being so patient and clear with your instructions. This procedure doesn't sound difficult but so many details to keep up with. You made me feel much more comfortable attempting this. Great video!
Good morning ☕️ we are truly honored to get this message from you, thank you.
The DIY community is the best, and we do our absolute best to get the community the info they need without wasting their valuable time.
We hope your DIY boat projects are going well, let us know if we can help answer any questions.
Enjoy your weekend. 😁👍🧰
Back before the convenience of taking pictures with your cellphone I made a lot of diagrams on paper lol, nicely done Michael 😁👍
Hey Michael, Thanks for the great job on the video! Easy to understand and very very helpful! I'll be sure to be back!
Good morning ☕️ you are welcome. We appreciate the feedback. 😁👍🧰
Thanks for the great video. You saved me some $ by DIY!
@@richardbailey6346
Good morning ☕️ we are honored to help. 🧰
You are truly a Godsend
Good morning ☕️ thank you. 👍 but lots more work to do! 😎👍🧰
Hi Michael. My solenoids are good the actual pump it self stopped working. Is there anyway to rebuild the pump?
Great videos, I was looking for one that shows how to get the trim pump and reservoir out. I have a leak.
@@markvollmar-ks4fg
We appreciate that, thank you. We don’t have a video on that at the moment however, it is on the list.
Looking forward to hearing back from you, let us know if you have any questions. 😁👍🧰
Excellent job describing things and showing how it all works. My boat drive is stuck in the up position and will not tilt/trim down. When I push the up and down buttons on the throttle arm, I can hear the sound and it sounds exactly like it does when it is actually moving/working properly, however, there is no movement of the outdrive. It is not going up or down, yet it sounds like it always does when working right. Does that mean my solenoids are good and I have some other issue? Any ideas? Thank you in advance!
@@robeggett9946
Thanks for watching, any update? It may be that there is air in the lines or a Trim switch on outdrive has malfunctioned.
We would focus first on the solenoid and replace both. Keep us posted.
Must be nice having such open access to everything. I have a Bayliner 175 and it’s ridiculous trying to get to anything.
@@seeya4046
Thanks for watching. The Bayliner 175 is a bit more tedious and less room design for sure. Let us know if you have any questions.
Same here with searay. Older boat. Real pain in the butt
@@richardbailey6346
Let us know if we can help answer any questions. 🧰
Do you know where the 2nd red fuse lead wire is connected to - the one you didn't remove? I have not only a blown fuse, but a totally mangled fuse holder and was thinking of rewiring it into its original location rather than splice the wires and installing a new fuse holder. My access is pretty tight though so the splicing isn't the worst option.
@@brian48026
Thanks for watching, any update? Are you referring to the part shown in link below?
www.ebay.com/itm/313685943865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lvVhobzhTp-&sssrc=4429486&ssuid=9oPkoM_JR36&var=&widget_ver=artemis&media=COPY
🧰
@@DIYwithMichaelBorders Yep - that's what I'm referring to
@@brian48026
Thanks for the reply, have you tracked it to its connection point?
@@DIYwithMichaelBorders Not yet, haven't had a chance to get back to my boat yet. I have an extremely tight fit with difficult visibility where its located on my Amberjack. Looking at this video, it seems to just be connected to one of the posts on the back side of the top solenoid. ruclips.net/video/9Zn2bZ1MuJ8/видео.html
@@brian48026
Thanks for the reply. In our case, the red wire has a bluish purple stripe and feeds out of the fuse casing and travels behind the upper Trim Solenoid and into the larger rubber housing.
What size is the fuse in that rubber boot
@@jmed4915
Thanks for watching. It’s either a 20amp or 25amp depending on the hydraulic pump and motor assembly model. Our fuse is a 25amp.
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
OEM Fuse: amzn.to/4fKMifv
😎👍🧰