Nice work. I made a similar unit over 10 years ago using an ac clutch from a 1991 bronco. I made it for my 3 yard dump truck. It held strong, never slipped, and never failed. I sold that truck last year and that clutch unit was still going well. That unit you made will work great and hold up to anything you throw at it. You are the only other person I've heard of doing this. Nice work!
@@СергейРогов-м1т9щ Хорошая работа. Я сделал аналогичный агрегат более 10 лет назад, используя сцепление переменного тока от bronco 1991 года выпуска. Я сделал его для своего трехметрового самосвала. Он держался крепко, никогда не скользил и не выходил из строя. Я продал этот грузовик в прошлом году, и сцепление все еще работало хорошо. Этот агрегат, который вы сделали, будет отлично работать и выдержит все, что вы в него бросите. Вы единственный человек, о котором я слышал, который делает это. Отличная работа! это то что он написал. а так что слабо через переводчик перевести?
That is pure genius!! It totally solves a problem I’ve been having on my own build…. It has never occurred to me to use the electric clutch on an a/c compressor. That alone got my subscription!
It took me a minute to figure out what you were doing. I thought you were using the AC compressor but what you wanted was the magnetic clutch assembly and the housing was convenient since you could install a different shaft to couple to the hydrolic pump. Nifty home made hydrolic pump.
This was cool just to see the tear down of and axial piston compressor. It's always fun to see the inside of things that you have only seen in animations.
I can do what you do but you do it much faster and I really enjoy watching it's nice to have a complete machine shop an excellent to see that your ideas are fully formed nicely done
This project has so many potential uses. Nice build, and your ability to build with minimal tools once again highlights both your problem-solving and fabrication skills.
Seen this reposted on RUclips and everyone was hating on you. I say this is a well made magnificent machine. You used basically scrap out of a recycling bin ready to be crushed and made a working hydraulic pump and arm that you can find parts for at any local scrap yard or you could buy replacement parts new and readily available because it's just an automotive ac compressor and basically a riding mower engine. It's honestly genuis.
You made a home made pto. For those that dont know what that means. It stands for powe take off. It is how hydraulic units work on things like tow trucks and other construction equipment. Very nice you are a great craftsman.
Very nice, I can think of a lot of uses that could be applied to, one being a lift gate for a pickup or maybe a hydraulic crane for loading and offloading steel or wood onto a trailer. Good work, be watching for your intended application.
Zawsze mnie zastanawia jak dużo jest / nie jest pokazane: wygląda jak robione "na żywo" wedle ogarniętej wcześniej samej zasady działania, ale pewnie jakieś liczenie, czy prototypowanie się przynajmniej zdarza. Świetna inwencja, jak zwykle :D
This was an amazing project and an incredible example of field fabrication. I watch a lot of this type of video for tips and tricks. Being able to fabricate solutions is a critical skill, especially for my family living in a very rural area. There were so many "take away" lessons from your video. The fabrication of the adapter plates, using spray paint for the template is brilliant. Great job!
I picked up an alternator with a hydraulic pump attached to the back. I like the use of the clutch so you don't have the starter turning the pump while trying to start the engine.
Nicely done and entertaining video. It was not what I expected, but the repurposing of the clutch performs those functions needed for the track loader application.
Идея очень понравилась, но для полноценной надёжной работы нужно крепление на 4 точки, при таком крепеже, как сейчас, оторвёт от станины в любой момент. Тут ставлю лайк именно за идею, и подписался, есть что посмотреть.
this is a really cool setup but can i ask why the hydraulic pump needs a clutch vs just direct drive and allowing it to run open circut? i could see the need for a clutch if this pump was on a vehicle to avoid long run times when the pump isnt needed. but why here?
Put a heavy duty microswitch to the lever by using a "B" cam, so the microswitch become depressed when you pull the lever in either direction, thus the pump only works when needed.
Ok by 1:45 ( and I think I did ff to get here) this Very smart clever Editing of excellent cam and sound, has easily Gotten me to the conclusion of a . Very very. Well done vid
Daamm thats pretty cool its not unheard of for us to get 50-60 thousand hours out of some of our heavy equipment pumps, but thats still not a bad idea, it would drastically extend the life of some things tho..
That’s very resourceful! I’m just trying to grasp the reason for it though. Cause a hydraulic circuit will be able to drain back to the tank when it’s not being used while the pump is still going. The only real benefit I see of this setup would be if you were running a hydraulic motor from the pump, you’d be able to start and stop it electrically.
That is a very nice way to modify the OEM "mower" pulley. Apparently it is common for people to modify mowers for high speed by flipping over that pulley assembly, which then has to be hacked in some such fashion. So cool!
Ya got this ya make it look easy to build understand and not a whole lot of tools thks for sharing your project with us keep making projects like this ya got this
@@Сварщикподереву почему вы так пишите?а откуда вы знаете что он русофоб?потому что вы так говорите?вы себе некоторые вещи говорите-побольше оптимизма дружище-с уважением
We are able to buy these run by an electric motor. Cost around NZ$900 - 1000. Enjoyed watching you make it for ten dollars tho. Also however that was a basement price. The pump assembly gets more costly as quality is assured moreso. No guarantee? Cheap as can be.😊
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Genius. You just gave me the idea for building a log splitter, and other projects I have rattling around in my brain. So, thank you.
Nice work. I made a similar unit over 10 years ago using an ac clutch from a 1991 bronco. I made it for my 3 yard dump truck. It held strong, never slipped, and never failed. I sold that truck last year and that clutch unit was still going well. That unit you made will work great and hold up to anything you throw at it.
You are the only other person I've heard of doing this.
Nice work!
Не понимаю я по вашему пишите по нашему по русски
@@СергейРогов-м1т9щ не ленись, учи английский…
@@СергейРогов-м1т9щ Хорошая работа. Я сделал аналогичный агрегат более 10 лет назад, используя сцепление переменного тока от bronco 1991 года выпуска. Я сделал его для своего трехметрового самосвала. Он держался крепко, никогда не скользил и не выходил из строя. Я продал этот грузовик в прошлом году, и сцепление все еще работало хорошо. Этот агрегат, который вы сделали, будет отлично работать и выдержит все, что вы в него бросите.
Вы единственный человек, о котором я слышал, который делает это.
Отличная работа! это то что он написал. а так что слабо через переводчик перевести?
That is pure genius!! It totally solves a problem I’ve been having on my own build…. It has never occurred to me to use the electric clutch on an a/c compressor. That alone got my subscription!
What a wonderful idea I want to convert my lawnmower into fully hydraulic and this is how I’m going to do it
@@robertmoody2221 why? The clutch is useless
It took me a minute to figure out what you were doing. I thought you were using the AC compressor but what you wanted was the magnetic clutch assembly and the housing was convenient since you could install a different shaft to couple to the hydrolic pump. Nifty home made hydrolic pump.
This was cool just to see the tear down of and axial piston compressor. It's always fun to see the inside of things that you have only seen in animations.
I can do what you do but you do it much faster and I really enjoy watching it's nice to have a complete machine shop an excellent to see that your ideas are fully formed nicely done
I was waiting for you to use the A/C compressor for a pump and the pump for a motor. I was thinking high volume oil flow. But what you did works too!
The entire video was impressive.
What was most impressive is he found a scrap yard AC compressor with a working clutch.
I'm surprised the aircon clutch holds torque that well! Nicely done. I like how you did that internal keyway.
Pretty sure it won't hold the torque!
@@davidut55I mean, it need to compress 400psi of refrigerant
So, essentially, a hydraulic pump with a magnetic clutch? Very cool!!! Love your videos!!!
That is the best idea ever. I have wanted to build a tracked hydraulic vehicle. I was thinking of using zero turn lawnmower transaxles.
First thought I had was log splitter.. Great production!
Damn. You guys have unlimited imagination. Awesome job
This project has so many potential uses. Nice build, and your ability to build with minimal tools once again highlights both your problem-solving and fabrication skills.
Seen this reposted on RUclips and everyone was hating on you. I say this is a well made magnificent machine. You used basically scrap out of a recycling bin ready to be crushed and made a working hydraulic pump and arm that you can find parts for at any local scrap yard or you could buy replacement parts new and readily available because it's just an automotive ac compressor and basically a riding mower engine. It's honestly genuis.
Helal olsun usta uzun videoyu kisa sure icinde cektiginiz icin ayrica teşekkürler elinize saglik
Браво, снимаю шляпу перед мастерами. Классный аппарат получился👍
You made a home made pto. For those that dont know what that means. It stands for powe take off. It is how hydraulic units work on things like tow trucks and other construction equipment. Very nice you are a great craftsman.
Nice video, I like the test in the end , this goes through wood like butter ,greetings from Spain
You just built a 5,000 dollar unit for maybe 200 bucks in parts. Hats off to you 😁❤
11
8
knowledge equals capital 😊
Hardly $5,000 as you claim. You can buy a complete, capable, and powerful log splitter brand new for less than half of what you claim.
@@ГенаМирошниченко-ф9кمن المشاركات المكتوبة
Excellent video ! 👍
Very nice, I can think of a lot of uses that could be applied to, one being a lift gate for a pickup or maybe a hydraulic crane for loading and offloading steel or wood onto a trailer. Good work, be watching for your intended application.
Semua pekerjaan yang anda pertontonkan dalam video video anda memang layak untuk ditonton,dan sangat banyak menginspirasi orang lain...lanjutkan teman
Zawsze mnie zastanawia jak dużo jest / nie jest pokazane: wygląda jak robione "na żywo" wedle ogarniętej wcześniej samej zasady działania, ale pewnie jakieś liczenie, czy prototypowanie się przynajmniej zdarza. Świetna inwencja, jak zwykle :D
Импровизация, хорошее воображение, немного знаний в механике, обработке, свойства металлов, пару станков.
This was an amazing project and an incredible example of field fabrication. I watch a lot of this type of video for tips and tricks. Being able to fabricate solutions is a critical skill, especially for my family living in a very rural area. There were so many "take away" lessons from your video. The fabrication of the adapter plates, using spray paint for the template is brilliant. Great job!
Skąd ty bierzesz pomysły na takie cudeńka? Ciekawe jaki będzie efekt końcowy!!!? Czekam z niecierpliwością. Pozdrowienia dla całej ekipy.
I love watching your videos. Of course I don't understand anything, BUT it's very exciting, good luck and success. Greetings from Tbilisi!
I wasn't sure where this was going, but man that's awesome. Great idea and excellent execution of it!
I picked up an alternator with a hydraulic pump attached to the back. I like the use of the clutch so you don't have the starter turning the pump while trying to start the engine.
Excellent work 👍👍👍Thank you for sharing. Be safe🇨🇦
i absolutely love your craftsman ship
My MOSTEST favorite channel.
I'm imagining some kind of tree stump annihilator. Great use of a decent clutch!
Wow so awesome you turn the compressor work into different types 👍👍
Nicely done and entertaining video. It was not what I expected, but the repurposing of the clutch performs those functions needed for the track loader application.
Everything solid as a rock!
I like that.
Regards from Belgium
Здравствуйте . Скажите пожалуйста как вам там в Бельгии живётся без нашего российского газа ?
I have never seen such homemade crafts in the Russian RUclips segment. class
That is thinking outside the box and using what is available to you. Looks loke a great project coming. Well done. 👍👍👍👍👍
Great work. Anxious for next video. Greetings from Brazil.
Идея очень понравилась, но для полноценной надёжной работы нужно крепление на 4 точки, при таком крепеже, как сейчас, оторвёт от станины в любой момент. Тут ставлю лайк именно за идею, и подписался, есть что посмотреть.
Nice show of skills… common sense plays a massive role in all of this.
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
Jestem pod wrażeniem pomysłów. SZACUN. Pozdrawiam z Gdańska
Brilliant. Loved it.
Such a powerful ram, it can poke through a thin rotted plank.
My finger could do that.
Çok zekice akıllı insanlar bu dünya için önemli değerlerdir.
this is a really cool setup but can i ask why the hydraulic pump needs a clutch vs just direct drive and allowing it to run open circut? i could see the need for a clutch if this pump was on a vehicle to avoid long run times when the pump isnt needed. but why here?
For youtube videos and for clueless idiots to like it...
Put a heavy duty microswitch to the lever by using a "B" cam, so the microswitch become depressed when you pull the lever in either direction, thus the pump only works when needed.
Poland brother mind blowing work you are awesome ❤❤❤
I marvel at your imagination and ingenuity
Amazing talent and understanding of the process
Bạn thật sự là một kỹ sư chuẩn. Làm những điều đó rất nhiều mất nhiều thời gian của bạn và đã có một kết quả hợp lý.
Wow congratulations for the First work 😊👏👏🔝🔝
Awesome as always 👍👍. Cheers, Stuart 🇦🇺
Ok by 1:45 ( and I think I did ff to get here) this
Very smart clever
Editing of excellent cam and sound, has easily
Gotten me to the conclusion of a . Very very. Well done vid
Aż się boję co żeś znowu wymyślił, lecz mimo tych obaw czekam efekt końcowy. 😎
I believe the compressor clutch is reused. Good idea
Super cool i l❤ve your work guys Fantastic 👍😊👍
Majster twoje konstrukcje, są MEGA~GIGA~TURBO~ZAJEFAJNE... NO😊
Yes can’t wait for next video 8n this series!
Excellent work you are great mechanic.
Skills! Looking forward to following along as usual.
Well on your way toward building an hydraulic log splitter!
Absolute genius idea!
Не знал что в польше есть такие рукодельные люди молодцы
The master at work!!! 👍
Very excited to see what kind of tracked vehicle you're making.
Daamm thats pretty cool its not unheard of for us to get 50-60 thousand hours out of some of our heavy equipment pumps, but thats still not a bad idea, it would drastically extend the life of some things tho..
Very nice, and inspiring!
Great job! Thanks for sharing!
👍🏻👍🏻
true definition of engineering
Große Klasse!!!👍👍👏👏
verry nice !!! thats some real inspiration for my tractor loader build !!!
Your temporary mounting is my definitive mounting
that was good bro! cant wait to the next one!
That’s very resourceful! I’m just trying to grasp the reason for it though. Cause a hydraulic circuit will be able to drain back to the tank when it’s not being used while the pump is still going.
The only real benefit I see of this setup would be if you were running a hydraulic motor from the pump, you’d be able to start and stop it electrically.
That is my thoughts as well.
Он не знает принцип работы распределмтеля
Либо очень плохо заводиться мотор
Tampoco entiendo el motivo de ese embrague.
Очень хорошо!
lovely skills and i like how you machined the shaft 😂
That is a very nice way to modify the OEM "mower" pulley. Apparently it is common for people to modify mowers for high speed by flipping over that pulley assembly, which then has to be hacked in some such fashion. So cool!
Ya got this ya make it look easy to build understand and not a whole lot of tools thks for sharing your project with us keep making projects like this ya got this
Appreciate your wonderful skill
Как всегда шикарное решение и исполнение. Удачи и новых идей.
Он по ходу Русофоб! Коменты на Русском не читает!
@@Сварщикподереву почему вы так пишите?а откуда вы знаете что он русофоб?потому что вы так говорите?вы себе некоторые вещи говорите-побольше оптимизма дружище-с уважением
Pretty cool! My guesses: either your own skid steer, or you're resuming the sort of work MegaBots did.
The wizard is at it again !
Marvelous masterpiece.
That really is a fantastic idea!
MM77 Approved 👍🏼👍🏼
Very impressive. Well done!
Impressive skills .
Здорово👏✊👍👏✊👍👏✊👍
Wow... Pretty fantastic work, dude! 😃
Looking forward to the next parts!
Stay safe there with your family! 🖖😊
That's pretty good.
Quem sabe fazer fais tudo o que vem na imaginação 😎😎
Great video...
Amazing skills.
Such an extraordinary work. wish you are in Canada and we are mates.
Taki montaż lepszy moim zdaniem niż ten "przyspieszony"
Tu też jest przyspieszony, tylko w mniejszym stopniu. Słychać po dźwięku choćby
We are able to buy these run by an electric motor. Cost around NZ$900 - 1000. Enjoyed watching you make it for ten dollars tho. Also however that was a basement price. The pump assembly gets more costly as quality is assured moreso. No guarantee? Cheap as can be.😊
Great work as always 😄😄
That is seriously cool