Repair pendrive Kingston
HTML-код
- Опубликовано: 20 авг 2024
- how to fix a corrupt USB Removable Disk
my pendrive 8 gb corrupt data
I gather information from searching on Google
how to fix a corrupt pendrive
I explain first error on my pendrive
-failed to copy files from PC folder to a flash
-some folders and files can not be opened
-only 3GB flash capacity is actually 8 gb
-can not be formatted minitools partition wizard
-can not be formatted with the Windows format utility
after tired in many ways to format with the usual formatting tools
based on information from the search engine google
My pendrive has broken can be fixed by a method
lowlevel format tools,due to software malfunction or there badsector
I ventured to try low level format method
in this way the data will be very difficult to be recovered
warning: backup your data
The following steps:
backup important data in flashdisk,first save your data
after all the data in the backup
then we tried the method low level format
download software is needed:
(chip genius & low level format software tools) mainly use for what?
later also will understand after you watch my videos
watch until the end do not miss
usb vid & pid must match exactly
with chipset vendors
after all the software in the download
Let us try to watch my video
I made several trial error
and finally I succeeded usb removable disk repair
once again DWYOR(DO WITH YOUR OWN RISK)
good luck
how to change the flash drive from 64MB to 64GB
• Cara Merubah FlashDisk...
THIS LINKS software:
1.kingston format utility
www.softpedia....
2.chip genius
www.softpedia....
3.low level format usb kingston software chipset vendor alcor
disk.yandex.ru...
if the software is not running,try searching in google search engine
the key word:AU6980-AU6983 usb download software
or this the key word= vid=0587 pid=6387 alcor usb download software
or can visit the site flashboot.ru/
the site russian language is strongly recommended to translate first with google translate
Man that chip genius is the best. Found that I had a different vendor. Phison. Found the software. Thank you
It's ok👌
I tried several versions of Alcor and it did not work.
using the alcor version of your video I was able to recover my pendrive thanks! : D
Ok👍
Description: (Kingston DataTraveler 3.0)
Device Type: Mass Storage Device
Protocal Version: USB 3.10
Current Speed: High Speed
Max Current: 296mA
USB Device ID: VID = 0951 PID = 1666
Device Vendor: Kingston
Device Name: DataTraveler 3.0
Device Revision: 0001
Controller Part-Number: Unknown
It is difficult to find the right firmware to repair a damaged flash if the controller part number unknown, even though the vendor chip is read. From the information I got from various sources on the internet.
Vid = 0951 Pid=1666 Used a variety of chip vendors including. Vendor chips:
~ USBest DT100G3 / 32GB
~Phison AD3A18A36125 PS2251-07 (PS2307)
~SSS"solid state system'"DATATRAVELAR 2.0 SSS6698_BB
~Phison AD3A18030050 PS2251.05.11) ~ALCOR KINGSTON 115T203G-3S-1A
~ FirstChip AD3A1803 0050 F/W: 08.03.50 ~Phison DATATRAVELER PS2309
~Phison PS2251-07 (PS2307) - F/W 08.03.50 [2018-05-11]
~Phison PS2251-07 (PS2307) - FW 01.02.53 [2014-03-05].
For firmware vid 0951 pid 1666 from the information I got, I haven't found the firmware yet. Kingston brand flash drives usually use the phison vendor. Here I will give you the link, please just try it one by one, maybe it can fix the damage to your flasdisk drive
Phison recovery tools www.mediafire.com/file/a6ncsk8jaeu6b1c/Phison_PS2251-07_USB_recovery_Tools.rar/file
Phison write protect remove www.usbdev.ru/f/index.php?topic=1892.0
Phison Format & Restore v3.21.0.0 www.usbdev.ru/?wpfb_dl=7061
Latest version
Phison Format & Restore v3.26.0.0
www.usbdev.ru/?wpfb_dl=9519
Phison low-level format. V.1.42 www.usbdev.ru/?wpfb_dl=222
Thank You it work.... Keep Making this type of video.
good, you've dared to try and succeed
Hary! you saved the life of a little pendrive that nows plays music in my car! You are a good man!
Okay👍
Hello
In my computer , pendrive show control vector- sss6695-BD.
And I don't found it.
Please, help me to find that tool.
Not found sss6695bd tool for repairing usb stick firmware . reboot.pro/topic/19920-how-to-fix-my-kingston-dt101-g2-32-gb-it-is-showing-0-mb www.usbdev.ru/post-sss6695-dt20-o0207
There is no SSS-6695-BD firmware for this controller. To restore Toshiba / Kingston on this chip, you can try formatting your USB stick by using the TransMemory Secure tool link www.usbdev.ru/?wpfb_dl=4997
Make video about fixing 3s 6697-b7(dtse9 32gb). :)
thank you thank you thank you!!! i cant thank you enough.. i had given up and was just about to throw my usb away :D
Hi, my kingston DT50 - 32GB is not detected after I copied some pdf of some .docx which i hv downloaded. Meanwhile K7 ultimate was scanning and showed "scanned xxxx files, none found" . I have all my data in that pendrive and it suddenly not getting detected. plz suggest any data retrieval process. only then I can format that pendrive.
To recover data use recovery programs. Widely circulating on the internet data recovery software from free and paid versions. Please find your own software to recover data on the Google search engine or Bing search engine.
Here I do not discuss too far to recover data on your flashdisk drive. The most important thing is how your damaged flashdisk drive can be used again. I am not responsible if the data on your flashdisk drive is lost forever or maybe your flash drive is damaged.
here I will discuss only flash drive repair methods.
here I use a lot of software for repair. please try yourself one by one if you are lucky, it is possible to successfully repair your flash drive.
1. Try software phison Format & Restore v3.13.0.0 [2013.08.29]
Link download
flashboot.ru/files/file/411/
2. Try software phison restore V3.21
Link download
www.usbdev.ru/?wpfb_dl=7061
3. Try software Phison MPALL v3.72.0B
Link download
www.flashdrive-repair.com/2016/03/phison-mpall-v3720b-ps2251-flashboot.html?m=1
4. Try Phison MPALL v5.03.0A-DL07 with binary-files: BN07V502TAW.BIN + FW07V50253TW.BIN
Link download
www.usbdev.ru/files/phison/mpall/
User Manual:
Link download
www.usbdev.ru/articles/a_phison/mpall-repair/
5. Try the last one Phison PS2251-07 (PS2307) Firmware [BN07*.BIN, FW07*.BIN
Link download
www.usbdev.ru/?wpfb_dl=4343
Good luck
In my case chip vendor isn't showing and it shows unknown. how can I find firmware from only pid and vid?
There are two ways to find out vid and pid hardware connected to the computer. The first method is using software and the second method is manually. The first way you can get the VID and PID data on a flash drive using software such as USb View, ChipCheck software, Flash Drive information extractor, easy chip that's an example of software for reading USB vid and PID. But I prefer to use the genius chip and flash drive information extractor. If the method above has not been able to read hardware vid and pid. Actually the Windows operating system has been able to recognize almost all brands of hardware that are connected to the computer. The final way to manually view the vid and pid can be seen in the device manager. This method applies to reading vid and PID of all hardware connected to the computer. I took the tutorial example from the huawei site. Just follow the way from the Huawei site is easy to understand. Just follow the manual method from the Huawei site below support.huawei.com/enterprise/en/knowledge/EKB1000072232 Hopefully with two ways with software tools and how to manually can read vid and pid that still cannot be read.
the program recognized my pendrive but it says not support flash error bad blo
ck 0/0, i tried with your app and it is not recognicing my pendrive, i do not know what else to do please help me
firmware does not match. you have to look for the firmware that matches the type of your flashdisk drive. even though vid and pid are the same. but the controller part number is different.
The controller vendor of mine is SMI
firmware usb flash drive SMI(silicon motion). can be downloaded on this site.
www.usbdev.ru/files/smi/
Description: [G:]USB Mass Storage Device(Generic Mass Storage)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 1908 PID = 9999
Serial Number: 0000000000000235
Device Vendor: Expert
Device Name: USB3.0 Check!
Device Revision: 0100
Manufacturer: Generic
Product Model: Mass Storage
Product Revision: 1.00
Controller Part-Number: Unknown
Sorry I did not find the firmware for your flashdisk drive. Likewise the controller part number unknown is difficult to find a suitable firmware. I get information similar to your flashdisk drive on a forum that discusses hardware. Please visit this forum
www.hkepc.com
Link:
www.google.com/url?sa=t&source=web&rct=j&url=www.hkepc.com/forum/viewthread.php%3Faction%3Dprintable%26tid%3D2180975&ved=2ahUKEwiWnZzY0KjwAhWIA3IKHQA1A34QFjAAegQIAxAC&usg=AOvVaw0sizJktCOpEOKFeBrAfKUf
translate this link into English in the forum it explains that the flashdisk Drive is fake and can't find a suitable firmware
It's work!!!!!!!!
Thank you very very very much! It's extremely helpful.
It saved my time.
Subscribed!
Trọng Nguyễn Công ok
Works with any Kingstone USB Flash Drive?
Sorry, this software can only repair certain types of usb flashdisk drives kingston. Not for all types of usb flashdisk drives kingston
Thanks for valuable information provide in this video. I have 16gb kingston pendrive model no DT106, when I connected it drive option display but not open it and shown us an error format your drive. I try in run command type cmd but not recover it always shown an error. Help plz
There is a possibility that the flash drive partition is corrupt. Try using the Windows default chkdsk command to repair a corrupt partition or you can try using the Easeus software to repair a corrupt partition. If you are still confused, follow the instructions in the following link:
www.easeus.com/amp/partition-manager-software/run-chkdsk-to-check-repair-drive.html
If there is important data that is still needed, try using a software recovery program to restore lost data
Link video:
ruclips.net/video/OQi-RfUGKoE/видео.html
Thanks for help sir
@@singhcreative5143 you're welcome👍
@@saluranapasaja
Sir, I saw your part 2 repair kingston pendrive, Its work almost all kingston pendrives, otherwise some model of kingston. Can you given your whatsapp no actually I need it your help, In youtube I did,nt send screenshot of what problem I faced it. My model no dt 106 so I downloaded alcor mp software
Thanks.. this helped me alot
You’re welcome
Good day I have a Kingstone of 16g 3.0 it tells me write protected I have tried to use many methods but it always indicates failure and I can not do anything, please recommend me, I am using the version you have in the video but it does not even show me the memory pen drive
The most effective way to overcome disk write protect by using the diskpart method. I give the video link below, to watch over disk write protect. Be careful using the diskpart method. Choose the right usb flashdrive partition. Use the tutorial from Sandeep Singh. ruclips.net/video/wgpNJX-yEek/видео.html
where i find software and necesery data for pendrive hp 128G USB3.2 ?
To repair your pendrive Follow the method below, all data records may be lost due to the pendrive formatting process. Data that has been formatted will be difficult to restore or recovery.
Go to this website: www.icare-recovery.com/howto/usb-flash-pen-drive-repair-tool.html
For branded HP pendrive repair tools, I haven't found any pendrive tools from the HP pendrive manufacturer. visit the site www.hp.com go to the software and driver support menu / enter the product serial number. or contact customer service
I am frequently getting bad block Error
Please follow the article instructions below: How to fix bad block errors.
www.usbdev.ru/articles/a_alcor/alcormp-repair/
if you have tried it there is still a message too many bad blocks, maybe there are many bad sectors on storage media, physical bad sectors.
How about USB Device ID: VID= 058F PID= 6366
Controller Vendor: Alcor
Thank you and hoping for your answer.
try to install the driver first so that it can be read on the computer
deviceinbox.com/usb/vid-058f-pid-6366.html
vid=058f pid=6366,This memory chip has various versions used for MICRO USB 2.0, CARD READER, multiple card reader,FLASH DISK and pendrive
for firmware not found
input vid 058f pid 6366
flashboot.ru/iflash/page1/
To format it use SD formater tools ver 2.0.0.3 sd-formatter.informer.com/2.0/ The latest version of SD format tools sd-card-formatter.en.uptodown.com/windows
for detail reference about vid 058f pid 6366. please read this article.
Controller Vendor: Alcor
Controller Part-Number: AU6366/AU6371
flashboot.ru/forum/index.php?topic=24072.0
Or this article
flashboot.ru/forum/index.php?topic=15328.0
@@saluranapasaja thank you for your answer.
My kingston pendrive is in RAW format and I can't convert to FAT32
make sure there is no important data on your flashdisk drive. try to backup the data first with recovery data software.
just use this method:
Link video:
ruclips.net/video/VvqbujnWHHw/видео.html
Or
ruclips.net/video/EpwoafZOCfM/видео.html
Or
www.diskpart.com/articles/format-micro-sd-card-from-raw-to-fat32-7201.html
But there's no controller or firmware for Dual drive 3.0 sandisk
Try this method www.easeus.com/partition-master/sandisk-repair-tool.html SanDisk repair tool www.usbdev.ru/files/sandisk/
@@saluranapasaja Thank you
how to do this for sd card I can't find the manufactural and more info about my st card it requires powerful detection
I can't find the controller part number of my sd card chip genious is not powerful tell me how to find the controller part number of my sd card it just works for usb drives
@@adnanaliadnanali2478 As far as I know there may be no software for Windows applications to find out specific and detailed information about micro SD. Software information in windows to find out microsd, most only read data transfer speeds and microsd capacity only. Try using a micro-SD card reader then enter your micro-SD card into the micro-SD card reader to read the micro-SD card. Then use the uSb device info or USBdeview software. Then look at the connected USB that is green. In the green list in the USB software review, you will see the USB information that you have. USB deview v2.80 can be downloaded at www.nirsoft.net Try using an android application there are apps like SD tools apk and others. In general, applications on Windows and on Android only read data transfer speeds and microsd capacity not in detail like microsd firmware, controller part number. Sorry, my answer is not satisfying for you.
thank you
hi great tutorial, however i have a pendrive problem, but with 16gb it got 5.30gb do you know why it happened? . do you know how to recover full memory?
The first answer to a flash drive is reduced capacity. The cause of corrupt data on a flash drive can occur because laptop users forcibly revoke the flash drive that is still connected to the computer or laptop without removing the flash drive safely, namely with the USB safely remove feature, it could also be due to computer viruses spread by fraudulent programmers due to its data being cannot be opened or damaged by a virus. The last one is because the flash drive that is used is a fake flash drive. Fake flash drive is prone to damage because the data is easy to corrupt, corrupt firmware. Although there is a resemblance to the physical appearance with the original flash drive but for strength and long-lasting the original flash drive is much more powerful and durable. Suggestions to use an original flash drive even though the price is much more expensive For the second answer how to restore data in its entirety. All software to restore lost data each has its advantages. For many data recovery software circulating on the internet. It's the same software to restore data. Try not to use free edition software, although it's good, it's not optimal. But use paid data recovery software such as pro edition recovery software, enterprise edition recovery software or recovery technician edition software. Please search on Google for keywords, please enter the keywords = software returns paid data such as pro edition recovery software, enterprise edition recovery software or recovery technician edition software. Or if you don't want to buy a pro or paid, there is also a pro edition recovery software that is portable. Just look for the portable version in the Google search engine. You just need to enter a Google search for the keywords I gave earlier For the link, sorry, I can't give this link on RUclips. example software restore data = diskdrill software, aomei partition recovery, easy recovery.
good luck
Bhai Kingston ke flash Hy format nahebho rahekindaly help me
thank you bro...
It's OK
*Help!*
it is showing 30500 : no support flash error bad block: 0/0
Use chipgenius software to get your flash disk drive information. Chipgenius can be downloaded with a link www.softpedia.com/get/System/System-Info/ChipGenius.shtml
Make sure the VID and PID information obtained from the chipgenius software matches the VID and PID that I shared on my video.
If the vid and pid are suitable and you have downloaded the low level alcor format tools. Then you run the low level format alcor software tool error message 3500 = no support flash error bad Block 0/0
You should look for the latest version"upgrade software" of Alcor low-level format tools.
I take the example. I use Alcor low level format tools Version 140806 MD.
alcor low level format tools
Version 140806.MD {AU6989SN-GT,5019}
download link:
www.usbdev.ru/?wpfb_dl=5128
If the alcor MP version 14.08.06 there is an error message 3500 = no support flash error bad Block 0/0.
You must upgrade the alcor software to the alcor MP 140912 or alcor version 160325.
AlcorMP (160325.MD)
{AU6989SN-GT/GTA/GTB/ GTC,89SNL-B/89SNL}
download link:
www.usbdev.ru/?wpfb_dl=6315
And AlcorMP(140912.MD) {AU6998,6989SN-GT}
download link:
www.usbdev.ru/?wpfb_dl=5071
@@saluranapasaja bro chip genius download kr k dekha tha
Só faltou você disponibilizar os aplicativos para poder baixarmos né. de toda forma obrigado!
this link:
1.chip genius
www.mediafire.com/file/k8b1lu0q1pbkmnr/ChipGenius_v4_18_0203.zip
2.low level format usb kingston software chipset vendor alcor
www.mediafire.com/file/cdzjh6q4qhsc9k8/Alcor_low_level_format_tools.zip
big thanks. its work!!!
Ok
borouge usb write protection how to remove plz tell me
Please try this method, many ways to fix USB write protected. Please read the USB write protected article first. It is important to know in the USB write protected repair method, in the method below, many people have succeeded in repairing the USB write protect, not all of them have succeeded with the method below.
Good luck.
This is the link of the article
www.disk-partition.com/articles/remove-write-protection-from-usb-1203.html
www.softpedia.com/get/Security/Security-Related/USB-Write-Protect.shtml
howtorecover.me/remove-write-protection-microsd-memory-card
This is the video on how to repair it
Video from TEch Zaada
7 Ways to remove protection from pendrive or sd card 2018 | Tech Zaada
ruclips.net/video/FlsT24NLOQw/видео.html
Video from MAlvaStyle
Flash drive Repair Software 100% FREE! MalvaStyle USB Repair Version 3.0.2
ruclips.net/video/K7apdv3JQRY/видео.html
@@saluranapasaja thank you so much my problem solve thank you so much
@@asnadgoldsamith6521 ok bro👍
bang, kalo cara benerin flashdik kingston datatraveler g3 pas di flasing preformat error gimana ya? jadi flashdisk tidak terbaca di laptop, disk management dan di chip genius
Di baca artikel ini aja ya
usb-promosi.com/tips-usb-flashdisk/tips-memperbaiki-usb-flash-disk-rusak/
Kalo msh blm terbaca flashdisknya baca artikel ini:
Device manager
Start tab not shown , can't click on it
The flashdisk drive's firmware did not match🙏
Fail error code 19 is coming in firstchip mp tool, device is not showing and even it is coming no media
thank you very much
thank you too, you dare to try it👍
Will u please give me links for my Kingston gt50 16gb pendrive , showing only vid pid and not showing chip vendor on chip appliaction and please give me video of the same pendrive
give clear information about your pendrive, the detection results from chip genius software
@@saluranapasaja showing only vid 0915 pid 1666 and revision 001 and vendor not showing
@@sumanthsai4015
it is quite difficult to find your flashdisk firmware. not all flashdisk firmware exists and is shared on the internet .. based on the information you provide. Please look for vid 0915 pid 1666 flash capacity 32 gb From the site flashboot.ru/iflash/saved/page1762 no flashdisk firmware Link: flashboot.ru/iflash/saved/page1762/
This is only my suggestion, whether it works or not, the chances of success are very small, maybe you want to try it, if you are unsure, don't try my advice, I'm afraid that your flashdisk will fail. Most brands of Kingston flashdisk use the phison vendor chipset. try using phison software. Phison series 2251-03 phison 2251-07 All you need to download the tools PS2251-03 or PS2251-07 series Download link repusb.cubava.cu/?page_id=140&cpage=3
Or download link www.flashdrive-repair.com/2013/09/phison-mpall-ps2251-firmware-update.html?m=1
If it doesn't work, I also give up. Sorry only that information can I give
Site reference:
www.flashdrive-repair.com
repusb.cuvaba.cu
flashboot.ru
@@saluranapasaja thank you bro
@@sumanthsai4015
Ok.bro
Sir please give me solution for write protection issue of
KINGSTAN DT50
VID 413C
PID 2010
SERIAL NUMBER 6&&1DE7718F&&0&&1
RIVISION 8.07
DEVICE TYPE Standard USB Device
MA Video:::
sorry bro I didn't find the software to fix your flashdisk from the flashboot.ru website
flashboot.ru/iflash/page994/
I've searched for utils kingstune software. But I did not find it
The controller vendor of mine is SMI, so I downloaded the SMI-SM3267AB tool... BUT I got as result a FAIL!! by BAD BLOCKS!!
Did I lost my flash drive?? :(
In my experience fixing a flashdisk that was damaged due to bad sectors.
If only the software is damaged.
Because of the bad software sector.Flashdisk Can still be repaired and can be reused normally to store your important data.
The worst possibility is that your flash drive has suffered permanent damage or bad physical sector.
Your flashdisk is already unable to save data, even if you can save data, only part of it.
It is not recommended if it is permanently damaged to store data, because data can be lost instantly.
Even though it is formatted using low level format tools, tens or hundreds of times of trial,
Still, bad sectors will remain and cannot be repaired
The answer is the possibility of permanent damage or bad physical sector
Mere pendrive has been encountered error or unknown capacity problem
There is a possibility that your pendrive has a damaged hardware, not software damage. storage media is damaged. try the diskpart method:
watch this video link
ruclips.net/video/qH9PxrKMwCQ/видео.html
The drive is not showing in the software
the software is not suitable for formatting your usb flash disk drive.
When I click start it says, Code file missing , Please help me to fix this code file
Usually when trying to repair a USB flashdisk drive, there is an error code that appears, whether it's from an incorrect firmware or hardware problem on the flash drive: whether it's physical bad sectors (too many bad blocks). That physical bad sectors are not can be repaired. if bad sectors due to software problems can still be fixed. Make sure the flash drive you are using is exactly the same as the firmware that I shared.
Please read if there are similar error codes when trying to repair a USB flash drive.
Possible errors in AlcorMP and FC MPTool: 20000: Invalid device error. Bad Block: 0/0 - program does not understand flash drive hardware, a different version of the production utility is required.
20100: Invalid device error -….
20200: No support device mode error. Bad Block: 0/0 -…. 30100: No flash in device error ID: 0xFF, 0xFF, 0xFF, 0xFF, 0xFF - utility reports that flash memory is not detected or cannot determine the type of memory, as a rule, this is a consequence of controller malfunction and must be restarted or versioned utility is not meant for this controller. This error can also indicate a problem with the flash drive hardware. 30000: Get flash ID errors: 0xFF, 0xFF, 0xFF, 0xFF, 0xFF -….
30400: Unknown flash error - utility did not know the memory chip installed in the flash drive, or controller crashed and memory was not detected properly. If the controller crashes, close the data bus, and if not, try another version of the utility.
30600: Get a module error. Bad Block: 0 / * - possibly as a software flaw (somewhere there is an incorrect entry for your memory, for example, in FlashList.ini), controller freeze (you need to close the data bus), hardware problem (solder, .. .).
30700: Bad Block: 0 / * - no main binary matches your memory-controller combination. Try a newer version of the production utility.
30D00: Please use the special MP tool. Bad Block: 0 / * - the utility tells you that you need to use a highly specialized version of the utility. Currently, three narrow specialties are available to us: D3 / eD3 (focus on working with Toshiba \ SanDisk TLC memory), Samsung 21nm TLC (the name speaks for itself), 6987 + L74 / L73 / 5D2F (for AU6987 \ 6990 controller with TLC memory Micron) and L74 / 5D2F (for controllers ~ AU6990 and AU6998 * line).
40100: Miss bin file error. Bad Block: 0 / * - will not find the binaries required for the operation. Try another version of the production utility, or provide the utility with what it needs.
50400: Too many bad block errors. Bad Block: * / * - there is a chance that memory is incorrectly defined in the program. Try to select the memory name in the production utility settings, if that doesn't help, then you may need to close the data bus or solder. Also, this error might be caused by an unacceptably low value of bad blocks allowed that is specified in the utility settings.
91B00: File copy error. Bad Block: * / * - maybe you decided to create a CD-ROM partition on the flash drive, and the ISO image size exceeds the flash drive size. 92D00: Res Size Setting Error. Bad Block: * / * - Invalid 2nd Reservation Size specified in settings.
A0000: User termination error. Bad Block: 0 / * - utility stopped, this may be the result of pressing the Stop button or a hardware problem with the flash drive.
Thank you so much, appreciated
@@jeffersondaguil1223 Oh, it's nothing
Alcor MP cannot detect my usb,
USB Device ID: VID=058F PID=1234
Controller Vendor: Alcor Micro
Controller Part-Number: AU6989SN/AU6989ANL.
Wrong firmware.
Just go to the internet and look for the AU6989SN USB mass production tool.
or visit the site.
flashboot.ru/iflash
Enter in the field vid = 058F, enter in the column pid = 1234, then press the search button. The results of the mass production tools will appear in the UTILS column. It remains to be left unearthed which means of mass production are suitable
Mas saya punya flashdisk kingston DT100G3 error setelah saya cabut dan skrg gk kebaca lagi, saya coba cari informasi pake chipgenius cuman muncul vid=0953 pid=0666, solusinya gimana mas?
Saran saya coba hubungkan flashdisk kingstonnya di pindah ke port USB lain,misal biasa di hubungkan flashdisknya ke port USB sebelah kanan coba di pindah hubungkan flashdisknya ke port USB sebelah kiri,kalo masih tidak terbaca juga,coba di hubungkan flashdisknya di laptop/komputer lain.
Cara lainnya,klik tautan link di bawah ini
carisinyal.com/cara-mengatasi-flashdisk-yang-tidak-terbaca/
@@saluranapasaja saya udh coba pindah ke port lain tetep aja gk kebaca, saya gk punya laptop lain tpi saya ada kabel otg dan saya hubungkan ke hp tetep tidak terbaca. Saya coba cek lewat termux dan ternyata ukuran flashdiskny masih terbaca 28.8gb tapi pas saya coba pake command "dd if=/dev/zero of=/dev/block/sda" ukurunny cuman 1gb (~950mb) doang. Jadi gimana itu mas?
@@dimdaz8811
Resiko data bisa hilang smua:
Pake software HDD low level format tools
Kalo ga bisa juga
pake software Rufus,kegunaannya buat bootable instal ulang Windows.
Tapi harus ada file mentahan windows 7 atau windows 10 format file tipenya .ISO.
File mentahan ISO windows tadi coba di write /format dengan Rufus untuk mengembalikan kapasitas flashdisk.
which is the tools mp for this usb dt microduo 3.0 kingston :( ?
no this alcor mp tools is not for kingston 3.0
@@saluranapasaja do you know which i can use ? Please :(
@@davidflorian8984
kingston microduo usb otg user manual
www.kingston.com/id/support/technical/products/dtduo3
for firmware kingston microduo usb otg 3.0 sorry i don't know
eae como é? tou com o mesmo problema... se arranjar solução põe aqui
se eu encontrar vou colocar aqui tambem
Hola buenos días tengo un pendrive de la marca kingston de 32gb. El problema tubo una caída al colocarlo a la computadora al transferir datos demoró en cargar y desapareció la unidad y no sé qué hacer para que aparezca la unidad de usb
Hello, good morning, I have a 32gb Kingston pendrive. The problem had a drop when placing it on the computer when transferring data it took a long time to load and the drive disappeared and I don't know what to do to make the USB drive appear
The first way is to check the USB drive. This method can repair damaged system files.
Check the USB drive following the steps below.
Link check usb drive.
www.easeus.com/partition-manager-software/run-chkdsk-to-check-repair-drive.html
If the second method doesn't work.
Format the USB drive.
Important: "all data on the USB drive will be lost, it will be difficult to recover the data"
How to format a USB drive follow the link below.
Link on how to format a USB drive:
www.easeus.com/partition-manager-software/format-usb-drive-for-pc-and-mac.html
@@saluranapasaja Do I have to run the program or is it to run windows cmd?
@@saluranapasaja The program is paid and not free.
In the description you are leaving the Chip Genius file but it is with a password
Greetings friend, I have problems to flash kingston dtse9 8 gb I cannot find the drivers, can you help me thanks
can you provide detailed information on the flashdsik drive you have, try running chipgenius software.result, Chipgenius software will read detailed information from the flashdisk drive that you have
my controller part number is unknown
Description: [G:]USB Mass Storage Device(UDISK USB2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 6711 PID = 6610
Device Revision: 0000
Manufacturer: UDISK
Product Model: USB2.0
Product Revision: 1.10
Controller Vendor: Micov
Controller Part-Number: *Unknown - 0x2E
*
Flash ID code: 50144050 - 1CE/Single Channel [SLC]
friend please help me repair my flash drive the driver is not installed after doing the low level format the driver was sm3257enba
Important: If the software is low-level format tools USB flash drive is running or progress bar software is running, do not pull the USB flash drive from a computer or laptop, because it will damage the hardware. Let the low level format program run until it's finished. Unless the low level format software isn't running, it's okay to unplug your flash drive from the computer or laptop. There is also the possibility of physical damage to the hardware "USB flash drive" such as a bad block / bad sector, it will be difficult to recover.
download chipgenius to find out in detail your USB flashdisk drive information.
www.softpedia.com/get/System/System-Info/ChipGenius.shtml
Use ChipGenius software to get detailed information about the usb flashdisk drive you have. then copy your usb flashdisk drive information report in detail obtained from chipgenius, write it in the comments column.
yes, but when you go deeper, into the options of manual setting, your USB flash drive, pen drive, there are a lot of options to click, enter boxes with numbers, and something else.
No one, absolutely no one, has ever been able to explain this. Maybe, finally, someone will do it, come to their senses and explain, each element, one element at a time, for the viewer
where vid pid?
first download the chip genius application, extract the downloaded application, connect the usb flash drive. then run the chip genius application. later you will get information on the usb flash drive that you have
plz i have my pen drive but its not go to start flashing i need it urggent plzz i try all about the video but still not ok contact me plzz fast thanks
try the diskpart method: watch this video link follow the tutorial ruclips.net/video/qH9PxrKMwCQ/видео.html
I can't able to get chip vendor and I'd from chipgenius . My pendrive is Kingston dt101 g2 16gb
I have a problem..I can't find the link for format tool alcor micro au6988..can you help me please what shoud I use??
try downloading this alcor fw:
flashboot.ru/files/file/21/
flashboot.ru/files/file/1/download/alcormp_au6998_110511_dd0/
extract the file with Winrar or 7zip software then select Alcormp.exe, right-click run as administrator
thnks to:flashboot.ru
Thank you..
@@saluranapasaja Huhu ..I tried to download it and run it as administration but it pop out can't be open.huhu..what can I do?
@@saluranapasaja Huhu ..I tried to download it and run it as administration but it pop out can't be open.huhu..what can I do?
@@saluranapasaja And also pop out (can't connect to services mnager.)help me please.huhu..I'm slowly giving up.😭😭
chip genius link is broken. mediafire said it was dangerous
Chipgenius secure link www.softpedia.com/get/System/System-Info/ChipGenius.shtml
flashdrive information extractor secure link www.softpedia.com/get/System/System-Info/Flash-Drive-Information-Extractor.shtml
Easy chip secure link www.softpedia.com/get/System/System-Info/ChipEasy.shtml
Hello, thank you for your video. Can you help me fix my mass storage flash disk VID=1976 PID=4082
CHIP MODEL= CBM4082
MEMORY CHIP=SD CARD
Recommended site flashboot.ru/iflash/.
I didn't find the firmware utility Enter vid 1976 pid 4082 .
Firmware utility not found.
Others are also looking for firmware utilities on the site kythuatphancung.vn/forum/index.php?/topic/613-chipsbank-tool-fix-repair-firmware/
Firmware utility not found.
On the site www.upan.cc www.upan.cc/tools/mass/UMPTool/ Firmware utility not found.
On the site megalodon.jp
Firmware utility not found.
I just found a utility for cbm4080.
For Chipsbank CBM4082 not found Chipsbank CBM4080 umptool v4.6.5.3 ; cbm4080_umptool_v4653 And Chipsbank Format Tool Chipsbank Format Tool v2.8 (2011-12-15) please search on this site megalodon.jp/2015-0506-0210-38/www.usbdev.ru/files/chipsbank/
Hello Sir
I have A kingstone USB Data Travel 3.0 / 64Gb write protected
I tried all methods but no results
--------------------------------------------------------------------------------------------------------------------------------
Description: [H:]Dispositif de stockage de masse USB(Kingston DataTraveler 3.0)
Device Type: Mass Storage Device
Protocal Version: USB 3.10
Current Speed: High Speed
Max Current: 504mA
USB Device ID: VID = 0951 PID = 1666
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler 3.0
Product Revision: PMAP
Controller Vendor: Phison
Controller Part-Number: PS2251-07(PS2307) - F/W 05.00.50 [2016-01-14]
Flash ID code: AD3A18A3 - Hynix H27UDG8M2MTR [TLC-16K]
Tools on web: dl.mydigit.net/special/up/phison.html
There is a type of flashdisk Similar to a USB card reader that has a button protect switch feature.
As we know the protect switch feature will protect your data from writing or deleting data. Data can only be read, cannot be written or deleted.
try to pay attention on the flashdisk that you have there may be a protect switch feature.
You have activated the USB protect switch button, to deactivate the protect switch button feature. Try to deactivate the Protect switch button down or slide the Protect switch button up to deactivate the Protect Switch feature. Then reconnect your flashdisk to the computer.
good luck
enter this forum then read the post, indeed there is a flashdisk that has a protect switch feature
file.vforum.vn/hinh/2014/9/write-protection-2.jpg
vforum.vn/diendan/showthread.php?47548-Cach-nap-firmware-cho-usb-sua-loi-USB-khong-format-duoc-Transcend-JVJ-Kingston-kingmax/page3
@@saluranapasaja Hello i have'nt this botton de desactivate write protection
I dismounted the usb key
this button is not found
@@BossVision1try the method below:
www.usbdev.ru/f/index.php?topic=1892.0
thank you
Ok👍
Hi thank you for your video .can you help me to repaire my flash disk Generic mass storage usb vid 1908 pid 0226 4g
sorry I did not find a firmware for your flash disk drive flashboot.ru/iflash/
@@saluranapasaja thanks so much
@@taharbend3225 You’re welcome🙏👍
it cannot be detected in alcorMP and chip genius gives me that the controller is unknown
and I tried other apps and the same result.
what is the solution?
solution from me is using diskpart method. its function is to format data/delete data flashdisk drive.
or use the software hp usb disk format tools
filehippo.com/download_hp_usb_disk_storage_format_tool/?ex=CORE-116.1
try to use flashdisk drive information extractor software( Flash Drive Information Extractor version 9.3.0.630 )maybe the flashdisk drive information is still read.
controller vendor - Alcor
part no. - AU6989SN-GTC [F500] - F/W FA01
can you give me the download link of the right tool ...i downloaded but after it completes it's scanning it starts again from the start ...
try this firmware ALCOR MP 17.10.30.MD
AlcorU2MP 17.10.30.MD {AU6989SN-GT/GTA/GTB/ GTC,89SNL-B,89SNL}
ALCOR MP 17.10.30.MD,Download here
www.usbdev.ru/?wpfb_dl=7897
Good Luck
Is kingston 64gb datatraveller g3is fake????? My kingston 64gb data traveler g3 is not working.... Will my problem solve after following your video???
rocking boy
Nowadays there are many fake flash drives on the market.
Various types of flashdisk brands that are well known are deliberately falsified.
Not only fake flashdisk, fake microsd is also a lot on the market.
I've tried only with one software to fix a flashdisk.
One unit of flashdisk can be manipulated from the actual capacity size
The capacity of the original flash drive is only 1GB can be manipulated to 64GB.
Maybe the trick of manipulating flashdisk capacity is what is used by flashdisk hijackers to make a profit
Please just follow the video stage that I shared.
It might be possible to successfully repair your flashdisk
rocking boy
Please search for yourself on the google search engine, the difference between an original flashdisk and a fake flashdisk
Mate. the Controller part is unknown please help me
it's difficult to fix an error flashdisk drive, if the controller part number is unknown
@@saluranapasaja I tried bunch of stuffs from YT or google. nothing seems to work. sad
@@aishi5300 Yes, that's right. Me too. hard to find flashdisk drive firmware, if controller part number is unknown
@@saluranapasaja what should i do?
@@aishi5300 try asking a forum that discusses flash drive repair, in that forum, surely the forum members or moderators have experienced the same case and there are already answers because of their knowledge and experience. or you can also ask other youtube channels that upload videos on youtube about flash drive repairs. maybe they understand more about the unknown controller part number on certain types of flash drives.
Example:Flashdrive repair.com, flashboot.ru,,usbdev.ru
Not able to find the part number from chip genius ?
if the chip genius software only recognizes the vid and pid
open this link
flashboot.ru/iflash/
enter the vid code and pid code in the search box, then press the search button.
Later it will appear, the flashdisk brand, flashdisk capacity, including flashdisk firmware.
firmware flashdisk is in the utils column.
Or you can repair all corrupted USB flash drives on this website
www.flashdriverepair.com
Bonjour Mr HARY
Merci 🙏 de me donner la méthode pour modifier le numero série ID contrôler usb 3.1 kingston datatraveler dt50 16gb merci en avance
the flash information you provide is incomplete. first run the genius chip software to get your flashdisk information in detail.
www.mediafire.com/file/k8b1lu0q1pbkmnr/ChipGenius_v4_18_0203.zip
Merci 🙏
@@taoufikcasa8375 ok👍sorry🙏
Hy my original Kingston flash not format kindly help mee
Thanks
Ok
Y Meri pendrive chal nhi RI kya kru
there is a possibility that the pendrive firmware that I share in the example video does not match the pendrive firmware that you have. the way you do, get the pendrive information that you have with the Chipgenius software, run the Chipgenius software, to get vid and pid and your pendrive detailed information. then look for the right firmware on the google search engine.
hello i'm looking for kingston dtse9H 32gb i couldn't find it vid=ffff pid=5678
AU6989SN-GT 64GB
Firmware link:
AlcorMP(140912.MD).rar file
Download Link:
www.usbdev.ru/?wpfb_dl=5071
But My USB storage Becomes 8GB to 4GB
as long as the flash disk drive can still be used, it doesn't matter, even though the capacity is reduced by 50 percent of the original flash disk drive capacity. most importantly the flash drive can still be used.
@@saluranapasaja hahahhaha Okay But You are roght...... 10 out of 100
@@saluranapasaja 10 out of 10 bahi great
@@saluranapasaja thabk u
@@syedtafheemurrahman169 ok👍
Thanksss
Oke 👍
I saw in part 2 alcor mp, how to judge an file
download the chipgenius software, run the chipgenius software, copy the information obtained from the chipgenius software, write in the comments column
LINK 2.chip genius mediafire deleted
www.softpedia.com/get/System/System-Info/ChipGenius.shtml
does anyone have one for toshiba TC58NC6623
it didn't work
hola no tenes la herramienta para flashar kingston dt 101 g2 16gb USB Device ID: VID = 0951 PID = 1665 gracias sasludos
try to use Phison UPTool v2.093-tests 2014.12.04
Download link:
www.upan.cc/tools/mass/Phison/5170.html
Or
Download link:
flashboot.ru/files/file/564/
@@saluranapasaja hola no me deja descargarlo :( gracias x tu tiempo saludos
@@saluranapasaja Hola Hary buen dia le comento mi caso cuento con una usb Kingston DT100 G3 de 32gb resulta que la formate con HDDLOWF y me quedo en formato raw el proceso lo hize con exito, he hecho testeos de superficies y todo lo correcto incluso el usb contiene los archivos pero ahora estan en RAW ya los rescate, pero quiero reflashear el USB ya que he tratado de formatear de varias maneras y ninguna me deja me dice "se ha especificado un dispositivo que no existe" el usb esta nuevo es original de Kingston, use el chipgenius y solo me brinda estos datos....
Description: [F:]Dispositivo de almacenamiento USB(Kingston DataTraveler 3.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.10
@@TopoGigio_504
this is my answer, if the controller part number is unknown, it will be difficult to fix it. such as the Sandisk brand, the flash drive made by the Sandisk controller part number is unknown. I've been looking in forums that discuss repairing flashdisk drives. in the google search engine by searching for vid 0951 pid 1666 or searching in the google search engine by only looking for the serial number EOD55EA1C85DF4C1493F1389 still not found. my advice is to try formatting using the mini tool partition wizard or using the default format tool for the kingston flashdisk drive, you can visit the site
www.kingston.com
My pendrive from 16gb down to 400mb aiyaaaaaa😭😭😭😭
The Alcor low level format tools did not see my (Kingston DataTraveler 2.0) 16gb drive.
Tho ChipGenius_v4_18_0203 showed it as
Description: USB Mass Storage Device(Kingston DataTraveler 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0951 PID = 1665
Serial Number: 50E549C20268FE30A981E363
Device Vendor: Kingston
Device Name: DataTraveler 2.0
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler 2.0
Product Revision: 1.00
Controller Vendor: Solid State Systems
Controller Part-Number: SSS6698-BB
Flash ID code: ADDE94DA - Hynix H27UCG8T2ATR - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB
Tools on web: dl.mydigit.net/special/up/sss.html
The information that you have provided about your type of flashdisk is complete. Many people are looking for the same firmware as your flashdisk .They also have not found a suitable firmware. Likewise I have not found the flashdrive firmware .
Please read the information for SSS6698-BB.On this forum or this site
Thanks to:
repusb.cubava.ru forum.lowyat.net
Here's the link forum.lowyat.net/topic/4239106/all
Or this link repusb.cubava.cu/?page_id=121
Sorry, I only gave a little information
@@saluranapasaja thanks there, I'll go to those link now to see but should you or anyone ever have any idea of any firmware that could help please let's have it.
I've equally write to the manufacturer for support tho they're asking for a some inscription on the metallic casing that I've been using as key holder
please help my controller is sss 6801
Please give link to all used software
Please please
THIS LINKS:
1.kingston format utility
www.mediafire.com/file/s940dfe0l67kj3u/kingston_format_utility.zip
2.chip genius
www.mediafire.com/file/k8b1lu0q1pbkmnr/ChipGenius_v4_18_0203.zip
3.low level format usb kingston software chipset vendor alcor
if the software is not running,try searching in google search engine
the key word:AU6980-AU6983 usb download software
or this the key word= vid=0587 pid=6387 alcor usb download software
or can visit the site flashboot.ru/
the site russian language is strongly recommended to translate first with google translate
3. low level format usb kingston software chipset vendor alcor
www.mediafire.com/file/cdzjh6q4qhsc9k8/Alcor_low_level_format_tools.zip
Hary Sapto okk thanks
Al of this software is suspicious, webroot's antivirus deletes all of this crap right away, say away
hwo repair sandick 8gb
to this link:
forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/repair-corrupted-pendrive/td-p/338287
forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/repair-corrupted-pendrive/m-p/339275#M10606
or this link:
kb.sandisk.com/app/answers/detail/a_id/19258/related/1
using software HP USB Disk Format Tool
Note: Formatting deletes all data on the drive, be sure to back up your data before formatting
how to set up password ..
setup the ALCOR USB format tool password
1.download software alcor low level format tools
2.extract the file that you have downloaded with winrar or winzip software
3.look for the file that file extension is "AlcorMP.ini"
4.Edit or open the AlcorMP.ini file
5.Search for the word OriginalityPW = 1234
default password = 1234
Change the value of OriginalityPW = ... (fill in the value up to you)
don't forget to save File AlcorMP.ini
[UFD]
UFDMode=1
PartitionNum=1
WriteiStar=0
PartitionRate=1000
P0VolumeLabel=
P1VolumeLabel=
OriginalityPw=1234
setup the ALCOR USB format tool password
the second way:
1.download software alcor low level format tools
2.extract the file that you have downloaded with winrar or winzip software
3.look for the file that file extension is "AlcorMP.ini"
4.Edit or open the AlcorMP.ini file
5.Search for the word PWD =
Change the value of PWD = ... (fill in the value up to you)
don't forget to save File AlcorMP.ini
[PASSWORD]
PWD=
REMEMBER_PWD=0
thanks a lot 👌👌
Hqo to formar kingston sd card , sd card is working but not formatting error massege unable to format please help me give me some link i subcribed u bro
link:
1. try link this format write protected ruclips.net/video/0kBcuaAw4RY/видео.html
2. use software MiniTool Partition Wizard www.partitionwizard.com/download.html
3. use software kb.sandisk.com/app/answers/detail/a_id/14827/~/using-sd-formatter-tool-to-restore-full-capacity-on-sdhc%2Fsdxc-cards
the last way
use the software SD Memory Card Formatter 5.0 for SD/SDHC/SDXC
link www.sdcard.org/downloads/formatter_4/
I am used to using this software
even though the data formatting is rather long
but this method is the most successful
first read the software usage guide
during microsd data formatting
never unplug microsd from a computer or laptop can damage microsd
until there is writing success 100%
Please guide nee
alcor au6366/au6371
please facebook for you im need help
I have a Facebook account, but rarely active on Facebook. write a comment in the youtube comment column, later I also answer the question
@@saluranapasaja hi please solve the flash disk its need software How To Fix USB Corrupted There is no Media in the Device Controller Vendor: Solid State Systems Controller Part-Number: TC58NC6623/SSS6698-BA USB Device ID: VID = 0930 PID = 6544 type flash :tosheba 16 g
@@kareemahmed7028 sorry bro I did not find the firmware for your type of flashdisk. Maybe you want to try this link,Toshiba 8gb flashdisk arifachri.blogspot.com/2016/03/download-sss6698-ba-controller-toshiba.html?m=1 This is a complete link for SSS solid state flashdisk-repair.blogspot.com/2017/07/firmware-sss-solid-state-system.html?m=1
@@saluranapasaja thanks alot my friend
@@saluranapasaja please im trying but the firmware not found
vlw salvou meu pen
ok
Description: [H:]USB Mass Storage Device(Kingston DataTraveler 2.0)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 0951 PID = 1665
Serial Number: 5404A6F4E0A6FD21492A2402
Device Vendor: Kingston
Device Name: DataTraveler 2.0
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler 2.0
SIR HELP ME PLSSS
Try this
Phison_UP13-UP16_PS2232_V1.05.00.rar
flashboot.ru/files/file/144/
Or
PS2251-07
muy mal video !!!!
Quiero decir, malo. si puedes hacer un video que sea mejor al menos de lo que yo hago. intente hacer un video tutorial para reparar una unidad flash. Más tarde daré comentarios para el video. ¿Es tu cuenta un novato? Tu cuenta no tiene ningún canal. Gracias por el cumplido o la crítica.