Brand NEW RC Nitro Monster Truck Car - Any good?
HTML-код
- Опубликовано: 4 окт 2024
- 🎓Free MINI eBay course + tips from Kev - kevtalbot.com/...
🎓FULL eBay Course (11 step Blueprint) - kevin-talbot.t...
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
🚗Kev's RC Basher School - kevin-talbot.t...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#kevintalbot #rccars #rc
Yes nitros can be a pain but once tuned and you know what you are doing it's the best. Cant beat the noise or smell of NITRO.
Except the noise and smell of a 2 stroke, like Kev's Baja.
exept the smell and sound of a 2 stroke 125cc go kart
Joels RC's can’t beat the smell of a yz450f
@@ceofirstclass3050 if its a 2stroke then it smells practicaly the same
Joels RC's 450f is a 4 smoker
I will never be able to afford one of these rc cars but watching you explore it make me feel like I own one. Cheers mate
Yes you will mate
No doubt you will be able to afford one, save a hundred out of each check and youll afford one in the matter of a few weeks
Not with that attitude you won’t, it’s not inconceivable that you could change your life and be able to buy toys - be more positive and focused
I have a Traxxas nitro slash, it’s completely stock, and I haven’t needed to do any upgrades. It’s amazing as it is. It took me a few month to figure out hot to tune it, but once I figured it out it was super easy, and super fun to drive!
I’m with Stemp!!! He always has a nitro!!! Good Man keep Nitro Alive!!!
▓▓▓░░░░░░
Why don't you try and make a homemade rc car build off with stevin and pat it would be nice for the Channel
Funds limited to very little as well. Someone has an advantage
They have! They built a bunch of RC cars from LEGO models and a bunch of stuff like that. Check out his older videos
@@davidtruelove5022 i was talking about from popicle sticksand shit
Kev: (Fideling around with the truck)
The Bodyshell: *Y E E E T!*
is it just me that sees people saying yeet
lol
Yeah he
My advice: be very cautious about any RTR (ready to run) as it also stands for "ready to repair"
The whole start procedure completely reminded me instantly why i sold all my nitro crap.
fun when they work, crap when they dont!
I converted my old tmaxx to electric
Never should have sold it
Hvacguru Arizona that’s why I buy Traxxas people may not like ez start but there the best I never have problems starting my jato.
Love the vids kevin, ran nitro for years, switched in 2009 to electro, biggest tip for nitro: grab a torch and heat the cilinderhead for 10sec, then wait 1min and it will start first pull.. cilinder and piston are conical, they dont have pistonrings, preheating wil make the perfect gap between piston and cilinder.
Its cylinder by the way
When you said something about the rear axels in the mad force it brought the good/semi bad memories of driving my old kysho dst and crashing it and alwaya loosing or breaking the front axles man i love that car but unfortumatly parts for it are really hard to come by nowadays
Pro tip, back the turbo or glow plug out half or full turn, apply igniter pull till it either runs or almost runs. Re tighten by hand with igniter then finish with tool. After this compression will be much kinder on starting and starting parts 👍
It's a beautiful truck, the design obviously reminds me of the legendary HPI Savage series which is probably my all time favourite.
My brother has the same truck but brushless,want to get some silcone plugs to lock the rear end for him,ready for some wheelies...
It reminds me of the Tamiya Terra crusher
Thanks Kevin for getting into some Nitro’s I can’t wait for more ! I hope they make a comeback!!
I got some team associated rc cars from my dad. love your vids
I got some team associated cars as well. They are quite good 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@@everythingjacksrc7201 I'm shredding around with the rally
That is cool 😎
I have one also but I need help with fixing it. It’s my first actual rc.
@@6666Gman what parts
Yes yes yes love seeing brand new nitro on the show
Pull it till it start remind me the old day. Pain and sour finger at the end of the day.
Looks awesome...the springs look really strange, huge coil spacing!
I bought a traxxas tmaxx 1.5 off of eBay, got it to run after finding out how to tune the engine, I don’t know what I prefer, electric rc cars are a lot easier to maintain and use, nitros can be a bit of a hassle but are more fun, gotta love the smell of nitro fuel and the noise.
haven't ran nitro since 2005, will never go back. I had a Duratrax Raze 1/8 Scale NITRO Buggy, Hpi firestorm, Team associated Rc10gt and a Nitro Warhead EVO Monster Truck 27. Brushless came out and the nitro got sold, converted the firestorm to brushless though.
Nitros great, just takes a little time to learn the setting of carbs, a little patients and time definitely helps
So glad I went from nitro to brushless. Way too much work just to get and keep those things running. Plug & play all the way baby!
I love Nitro I just want to see you enjoy it and not end up hating it again! Once you actually learn it all it’s extremely simple and all nitros will be the same to you! It will be like electric is now for you!!! Super simple! One day it will just click with carb tuning a light bulb will go off and you will really enjoy it!!! It takes research, respect, and practice like everything else!! I love that you’re coming back to it please keep it that way an learn how to make it easier on yourself so I can watch your badass videos!!! Thanks!!!! 🙏🏻
The first 5 min of this video is EXACTLY why i went strictly electric and never looked back.
Hell yeah lol
the runaway rc car from stenf looks like the WLtoys a979b
I suggest you do a dirt cheap banggood brushless review
My GOD turn the low speed screw out to the left at least a 1/4 turn!!!
Low speed wasn't what he touched it was idle screw
Is that why the car kept during off idle? I got an hpi savage that does that when cold
Yup, you can hear it running lean at idle and during part throttle. If idle is out of control, try richening the low speed needle.
Nitro trucks are dinosaurs, and I just purchased one! Love that sound, smell, and finicky nature of these beasts!
20 years in this hobby, I will never go back to nitro.
I like how his finger was in frame for the first bit of the video
This should help you. Fully tighten the fuel needle.
After that try 2 and half turns to open position and if its not running as good keep opening until its at flash. Never mess with the low speed and idle.
7:20 did you get that used off ebay like 5 years ago? I think that's my old baby. definetely had a very similar vent holes design and the pullstart cutout.
The look of this car is Really a look of the savage just the gearbox way of the engine is mounted
As a rule of thumb, if it ain't smoking it's too lean n that high needle needs to b opened up a bit. When you give it throttle and it does that choking/bogging thing like it did at 11:19 and at 12:09 it means that low speed needle needs to be backed out a bit, but only tune the low speed needle once the high speed needle has been set n has a nice trail of smoke, without that smoke you will just fry the engine
I'm keep my T-Maxx thank you!😍
still got a 3.3 Tmaxx, had it for a decade, kev said they dont go backwards, tmaxx can :D
i bought mine 6 years ago and it's still working
Kinda built like the savage with the twin plates. Pain in the arse to work on it would imagine.
ill let you know!
“It was probably my fault…” YES, I’m going to take that as a disclaimer for every video and get it out the way because you are darn entertaining to watch.
I miss my Nitros from a year back. Listening to the sound of the engine and the smell of burnt fuel. I Don't miss all the problems trying to keep it running at times. ☁ s coming over pressure changes and doesn't want to run. Breaking in the engine got a little boring.
Electric cars and trucks are taking over as you know. A lot less problem free and they really are Ready to run without all the problems that fuel has.
If they could just install engine sounds and mimic fuel burn off they'd be complete.
Good video, Sir Kevin!
All my toys are nitro, it’s all I run. My HPI Savage is my go to basher! If you ever wanna sell yours let me know! I’ll gladly take it off yer hands
Hey kev, them engines can be a nightmare, bit half tank lean issue that plagued the savage, not as bad though. Worth noting that the needle you expect to be the LSN is in fact a mid speed needle. The lsn is actually on the side the servo attaches too.
I miss my old nitro RC Kyosho PureTen GP Corvette Stingray so much...
But after seeing your videos, I´m considering to buy a new nitro RC car again.
What´s the cheapest/reliable model ready-to-run that you can recommend to me, please?
Cheers from Brazil!
Tuning is really pretty simple. You need to study up an watch some videos on it or something.
Kev ! I am from Germany. Glad to see u back in Nitro :D
All of those issues are EXACTLY why I left nitro. I went back once with the awesome Thunder Tiger S59 Sledgehammer, but within 2 weeks, I missed brushless and sold it
Yeah your low speed was pig rich. I have mine tuned to where it’s a light smoke at idle if that and steady smoke at WOT. The little sh-18 in my volcano will do wheelies. I also mess with small gas stuff all the time so tuning is a bit easier.
LoL. Ahh yes. The joys of getting a glow engine to start. Nice truck, but I’ll stick with the simplicity of Electric vehicles. Awesome vid. As usual
Kev: Get's a Cool RC.
Also Kev: We got a new Lypo if that's how you spell it XD
Dang kev. You have some balls for touching that spider.
I love nitros I still have my 2017 traxxas jato 3.3 TSM I got my old 2007 jato 3.3 back I got 2 jato 3.3s now
I've found the TSM on Traxxas nitros to be a pain. My brother has the T-Maxx 2.5 and I've got the Revo 3.3 and we both had nothing but problems with the TSM. Not sure if it's just the vibrations from the engine or the heat that is the culprit but I purchased a Spektrum radio and receiver that I'm going to try in it. I've had the Spektrum for about 5 months now and have been busy with my other RCs and my new boat to install it. I have read reviews that Futaba is better but I like the feel of the Spektrum.
Love my Nitro and Gas vehicles. Yes they can be a pain in the ass. But there is something about the sound and smell from the exhaust.
Pinch test will really help you dial in the low speed needle! Remember must be warm, it’s best to have a temp gun, and the engine should die within 2-3 seconds of pinching the fuel line.
I’ll help ya tune it , let me know the next time your down that retail park and I’ll bring the LST2 down.
Considering buying a Arrma Infraction when they’re released.
I also started w nitros, now I mostly fly flow rc planes. I like nitro on airplanes cause its easy, a prop and thats it. On rc nitro cars, got the clutchbell, drivetraim, it gets complicated quick.
Kev: it looks epic
Me: it looks like a f150
Been bashing with electric for about 4 years. Got my first budget nitro 4 months ago. Done my home work and have had so much fun with it Maybe when I’m ready for another NT this could be the next or maybe a nice kyosho rtr
I'm glad ur doing a review!! Been wondering about this thing cant wait to watch and see!!
i adore my T-Maxx 3.3!
it has the original Blue Cap Powerstrokes with the Bypass shocks and they have been abused for a good 15 years and still strong as ever!
hoping i can get too this meet you are planning!
Stemps radio for the 1:16th scale nitro stadium truck seems like it's on it's way out, it should not do that if he turns the radio around or shake it lightly that's for sure...
Also should be a way so you can set the direction the servo is supposed too pull on the failsafe i believe.
otherwise he might be able too just turn the servo around in the car & reverse the channel on the radio then the fail safe should pull the brake instead.
So you really gotta know what you are doing when you get into these seems like. Side note: My Dad used to race dual engine go-karts in the 70s at Riverside and Ontario raceways and they had big stainless side tanks and ran Nitro, 145 mph, loved the smell. I was just a little guy, 5 yrs. old? Anyway, ☮️ 😆 Thx for sharing Kev! Enjoy!
HS 3.5 out from closed LS 2.5 out from closed, worth a try dude.. tell stemp to leave the glow ignitor on for a few seconds after start as the nitro will just cool the plug to fast and cause it to stall, you want thay plug to warm up nice, thats why they cut out at first when you apply throttle, Im probably telling you how to suck eggs lol..
Big, Crazy, Fast = AWESOME Kevin Talbot content!
nitro is really cool, it may be funner then electric but it looks like alot of work. however, workin on rc's is half the fun I guess, good vid kevs
it's whatever makes you smile ... that's the right rc for you!
yes! All of them if i had my way lol
@@KevinTalbotTV lol me too :)
I both love and HATE nitros all at the same time. These days I much prefer brushless. I have 3 nitro trucks and they're pretty much shelf queens now
i got hay hyper mt nitro too. if you let it idle too long the the carb gets loaded up and it stalls if you try and yeet it like at 12:45 . Gotta ease into it till it clears out, then you can beast it.
Cool video kev it's cool to see you guys out having a good time with some nitros
kevin there's a spider where I live that can get to 6in long and runs 10mph it's called a sun spider
At the track right now, my bud is still trying to start his rc, and this is my 17 turn. I'll be on my second battery by the time he turns on an tunes his rc for this cold morning. Lol
Kev, the hobao is still running too rich, adjusting HSN will increase acceleration and top speed, but you may need to adjust gear shift point in the gear box
Stempy, on the jackhammer, your idle speed is too high, and your LSN needs adjusting,8th of a turn one way or the other, the current bad setting on your LSN could be the reason you have to have it idle so high
Make nitro great again 👍🏻
fgbaja29cc nitro has never been great
dean marshall batteries are for girls vib----r
Hey Kevin I'm trying to preserve my grave digger body for bashing what do yo recommend to protect the outside stickers to keep it looking it's best thanks for being awesome and yes I've smashed the bell
Hobao sounded bad at idle richen ur lsn. On the other hand very nice car I have the hyper ss cage nitro and it's been amazing since I got it, no issues out of the box, easy to strip down and wrench on, easy to start and tune and it runs like a champ, mine came with savox servos out of the box. Hobao nitros are great I love them, best out there for a beginner car I reckon👍🏻
do a video on ALL of your rcs... im curious if you have over 500 because i wont be surprised
Same problem I have with my nitro, traxxas 4tec, bought it like almost 20 years ago. Has a pro .15 engine. It goes 50 mph max, but it's not shifting. What I notice is that it does go the top speed but it starts out kinda slow, like if it is stuck in 2nd gear. Been messing around with it but still no luck. Will keep trying.
I have a few hobao vehicles. None of the nitros. Glad you made this so I can see one in action
You should really run these in 5 tanks before hand. Otherwise it will break. Nice vid none the less! :)
Nice man i want a Nitro!! I have the Hobao Hyper SSe Truggy on 4s, 120a hobbywing ezrun, a cheapo 25kg servo, a surpass hobby 4076 2250kv brushless motor and a Radiolink RC4GS transmitter reciever, absolutely love hobao!!
I reccomend you get a tamiya ndf-01 they are very quick upgradeable and affordable and most of all very reliable
Kev, will you change the battery for the steering?
It can’t of just been me waiting the whole time for that crazy scruffy guy to turn up to tell you guys off 😂
Any plans to get a Tekno MT410?
Great video! Love a good nitro vid!
Nice to see some nitros!
I've ditched my nitro for 1/5 petrol, best move ever
Looks like a beast because it's a Ford F-150
I've recently bought a hpi rs4 super nitro rolling chassis off eBay, I've bought a few bits for it so far but not 100% clued up on nitro rc's, hopefully I'll learn abit from your video's 👍🏻
It's all in the tuning, the rest falls into place.
Keep up the nitro content lovin it man! Braappp on!
Hi Kevin what rc do you recommend for a bashing at the beach
You need 1 tune to start n warm it up then the racing tune... Nice work buddy!
It will do back flips on the ground if tune right
Cox cars n planes were the best. Fill with fuel put battery connection on top of motor head and crank. Never disappointed with a Cox product
hey kev what do think is more worth money, getting a big 1/5th scale gasser like a hpi baja(a real one), maybe losi 5ive.. or get a xmaxx?
X maxx
Great 👍🏻 video kev I was waiting for a run away but you did not have one lol 😂 hahah.
Kev, I say that motor is running way too rich. Recommend Stemp to do the tuning next vid. also liked the vid
Nitro r/c's are cool, but for me personally, too much maintenance... or wrenching, as you guys say! Thanks for sharing Kev, love your channel.
Nice Kev where you get the nitro from Kev I enjoy all of your vids can’t wait for the live stream video
I swapped my pull start for a drill start 👌💪
This truck is the best. I have one too. Best 1/8 nitro mt by far. Way better and more durable than the savage and very easy to work on. Btw your low end needle are very very lean. Please richen it.
Got any old nitro engines laying around? Trying to get my old savage xl running again!!!
When I use to work in a hobby store the main comment was its a expensive hobby. They weren't complaining just making a statement. The vehicle price wasn't a issue but the repair parts were very expensive, but it didn't matter because they had a lot of fun causing the issue.
Great vid. I'm toying with the idea of getting into RC and can't decide nitro or battery. Also want to build from scratch so I can learn about RC. New sub ;)
That is nice mate its very sporty looking for a truck 🔥👌
Be alright if it worked!
Love the merch Kevin, you need a tumbly wumbly shirt too!